Projects
Remarkable open-source builds — checked, explained and honestly judged.
76 projects
FULL CADBuild a drone that flies on just one motor
RoboticsFor expert builders
NO CAD FILESA 3D-printed tentacle that curls and bends like it is alive
RoboticsFor intermediate builders
FULL CADYou can now build a 17-joint robotic hand at home
RoboticsFor expert builders
NO CAD FILESA 16-year-old built a fully 3D printed robot arm
RoboticsFor expert builders
NO CAD FILESAn old Roomba turned into a camera robot you drive from your phone
RoboticsFor intermediate builders
FULL CADA homemade robot dog named after Spot spelled backwards
RoboticsFor expert builders
FULL CADThis tiny robot costs about 50 dollars in parts
RoboticsFor intermediate builders
NO CAD FILESAnki's dead robot just woke up again
RoboticsFor beginners
FULL CADOld PS3 cameras now guide these drones
RoboticsFor advanced builders
FULL CADYou can build an Etch A Sketch that draws your photo by itself
RoboticsFor advanced builders
FULL CADYou can build a chessboard that plays against you by itself
RoboticsFor advanced builders
FULL CADYou can build a real Transformer you can ride
RoboticsFor expert builders
FULL CADYou can build a machine that bends wire into any shape
WorkshopFor advanced builders
FULL CADYou can build your own Onewheel, and it really rides
RoboticsFor advanced builders
FULL CADYou can build a robot that hangs from your ceiling and picks things up off the floor
RoboticsFor expert builders
FULL CADYou can build a robot boat swarm for lab research for 522 Canadian dollars a boat - or 317 each when you build ten
RoboticsFor advanced builders
FULL CADYou can build a 50-dollar open alternative to a 5,000-dollar drone navigation box
RoboticsFor advanced builders
FULL CADYou can build an open-source underwater research robot for 850 dollars
RoboticsFor expert builders
FULL CADYou can build the 2,500-dollar drone winch for 120 dollars, and it lifts 3 kg
RoboticsFor advanced builders
FULL CADYou can build the 17,950-dollar robot you drive with your eyes, for 632 dollars
RoboticsFor expert builders
NO CAD FILESMIT printed a hinge that feels its own bending - and no sensor gets added
Open-hardwareFor expert builders
FULL CADOpenTOFLidar: a scanning laser rangefinder built from scratch for about 94 dollars in parts
RoboticsFor expert builders
FULL CADA dead 3D printer's motors reborn as an off-road 4WD rover
RoboticsFor intermediate builders
FULL CADMUR: an open-source underwater robot for research and exploration
RoboticsFor expert builders
showing 24 of 76