TURN A 256GB IPHONE AIR INTO A 1TB ONE

A working 1TB iPhone Air exists, but you need to desolder the original storage chip and ball-grid solder a new one in its place.

by DirectorFeng

Open-hardware

difficulty
●●●●●
time
a full day
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

The process is straightforward on paper: open the phone, remove the logic board, heat off the original BGA flash chip, clean every pad, solder the new chip in place, reassemble, and restore iOS from a Mac. The phone boots with 1TB and works. The technique is real. The problem is that almost no one reading this can actually do it. Ball-grid array soldering on a phone logic board is microsoldering at its most unforgiving — a single bridged ball or lifted pad kills the board, and you have no second chance on a brand-new phone. You need a BGA rework station, a stereo microscope, flux, the correct solder balls, and the muscle memory that only comes from destroying cheaper boards first. The video does not name the replacement chip model or the rework profile, so you are sourcing both yourself. The chip comes from the grey market, and quality varies. If this is your first BGA job, it will not work. If you already do phone board repair for a living, this is a weekend novelty with a real chance of success. For everyone else, it is an expensive way to learn why microsoldering services cost what they do.

GOOD TO KNOW

  • —This is a technique demonstration, not a published project with files or a bill of materials.
  • —DirectorFeng's video shows the process but does not include part numbers for the replacement chip or rework station settings.
  • —The flash chip comes from the electronics parts market; Apple does not sell them.
  • —This voids your warranty the moment you open the phone.
  • —No licence applies because there is no published design or code.

Parts to buy

9 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Replacement 1TB NAND flash chipFind
  • BGA rework stationFind
  • Stereo microscopeFind
  • FluxFind
  • Solder ballsFind
  • Precision tweezersFind
  • Isopropyl alcoholFind
  • Heat-resistant tapeFind
  • Logic board holderFind

Can I build this?

Printnothing required
Buyreplacement 1TB NAND flash chip (parts market, model not specified), BGA rework station, stereo microscope, flux, solder balls, precision tweezers, isopropyl alcohol, heat-resistant tape, logic board holder
ToolsBGA rework station with programmable heat profiles, stereo microscope, hot air station, soldering iron, multimeter, Mac running macOS for iOS restore
SkillsAdvanced microsoldering. BGA chip removal and placement is the hardest common repair task; if you have not successfully reballed and reflowed a chip before, this is not the project to start with.
TimeA full day if you already know BGA work; weeks of practice on sacrificial boards if you do not.
Cost$$$. The rework station alone starts at several hundred dollars; a good stereo microscope adds more. The phone is $999 new, and you are betting that on your first attempt. Budget for at least one destroyed board.
SafetyLithium battery inside the phone — puncturing it causes fire. The BGA station runs hot enough to burn skin and melt plastic; work in a ventilated area and keep flammable materials clear.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

iPhone Air 256G Perfectly Upgraded to 1TB High-Speed Flash Storage

Shows chip removal, pad cleaning, new chip placement, and iOS restore. No part numbers or rework station settings are given.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch and decide whether you have the equipment and skill level it shows. (The video is the only documentation. If any step looks unfamiliar, you are not ready.)
  2. 2.Practice BGA removal and placement on sacrificial logic boards before touching the iPhone.(This is not a learn-as-you-go project. Destroy cheap boards first.)
  3. 3.Source a compatible 1TB NAND flash chip from the electronics parts market.(DirectorFeng does not name the chip model. You are identifying it yourself or buying from a reseller who knows iPhone board repair.)
  4. 4.Set up your rework station, microscope, and board holder before opening the phone.(Once the phone is open, the lithium battery is exposed and you cannot leave it half-done.)

KNOWN ISSUES

  • The video does not specify the replacement chip model or where to buy it. You are sourcing that yourself from the grey market, and counterfeit or wrong-spec chips are common.
  • BGA soldering has no margin for error. A single misaligned ball or too much heat will kill the logic board, and you cannot undo it.
  • Opening the phone voids the warranty immediately. If the upgrade fails, Apple will not service the phone.
  • The rework station and microscope are expensive tools. If you do not already own them for other repairs, this project does not justify the cost.
  • iOS restore depends on Apple's servers being willing to activate the phone with the new chip. There are reports of activation issues with non-Apple hardware.
  • The video is in Chinese with auto-translated subtitles. Critical details about temperature, timing, or chip orientation may be lost in translation.

Can I do this without a BGA rework station?

No. A hot air station alone cannot remove or reflow a ball-grid array chip reliably. You need programmable bottom and top heat, which only a rework station provides.

Will Apple detect the upgraded storage and refuse to update iOS?

DirectorFeng's phone booted and ran iOS after the swap, but there is no long-term data on whether future updates or diagnostics will flag the non-Apple chip. You are in uncharted territory.

Where do I buy the 1TB flash chip?

The video does not say. Parts resellers who focus on phone board repair sometimes stock iPhone NAND chips, but you need to know the exact model and verify it matches the iPhone Air's controller.

How much does the replacement chip cost?

Unknown. Pricing for grey-market phone flash chips varies widely depending on source and whether the chip is new, refurbished, or harvested from another device.

Is this legal?

Modifying your own phone is legal. Selling modified phones or offering this as a service may run into trademark, warranty fraud, or right-to-repair issues depending on your jurisdiction.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

DirectorFeng pulled this off on a brand-new $999 phone with no published chip model, no rework profile, and no second chance if a ball bridges. If you have done BGA work before, what board did you learn on — and how many did you destroy first?

CompareeTEAM8d ago

Practical notes from our verification: DirectorFeng's video is the only documentation, and it is a process demonstration rather than a step-by-step guide. The replacement chip model is never named, the rework station settings are not shown, and the source for the chip is not mentioned. The video proves the technique works, but it does not give you enough information to replicate it unless you already know how to source phone NAND chips and set BGA reflow profiles yourself. The single biggest thing missing is not the equipment — it is the hundred hours of practice on dead boards that come before you risk a new phone. If this is your first ball-grid array job, it will fail.

DirectorFeng

DirectorFeng runs a YouTube channel focused on electronics repair and modification, particularly phone and tablet board-level work. and shows the full process from board removal to iOS restore, though without detailed part sourcing or rework station settings.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.