TURN AN ORDINARY MICROWAVE INTO A FURNACE THAT MELTS IRON
Silicon carbide crucibles turn an ordinary kitchen microwave into a furnace hot enough to melt cast iron.
by Shake the Future
- difficulty
- ●●●●●
- time
- multiple sessions
- license
- license not specified
- repo
- repo
●●●●● · multiple sessions · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
Shake the Future melted cast iron in an ordinary kitchen microwave and cast an adjustable wrench. The technique is real: homemade silicon carbide crucibles absorb microwaves and heat up inside an insulating chamber (a microwave kiln), with silicon carbide rings that also heat up. He 3D printed wrench parts in PLA, packed them in fine silica sand and sodium silicate to make molds, burned out the plastic in the same microwave kiln, then poured molten iron. The kiln is controlled with nothing more than a cycle timer and a handheld thermometer, no PID controller. The video is a demonstration, not a build guide. No files, written instructions or materials list come with it, and the kiln build itself is only covered in his other videos. The first melt turned out not to be cast iron but a metal he could not identify, and the finished wrench snapped when he tested it. This is advanced metalworking with serious hazards: you need to source silicon carbide and you are working with molten metal in a device not designed for it. If you already do lost-PLA casting and want to experiment with microwave heating, this is a starting point. If you have never cast metal before, this is not where you begin.
IN THE REPO
GOOD TO KNOW
- —This is a YouTube demonstration, not a repository.
- —There are no CAD files, no BOM, no written instructions.
- —The wrench pieces were 3D printed, but no files are linked with the video.
- —The silicon carbide crucibles and kiln are shown in use; the creator says the kiln build is covered in his other videos.
- —The first melt was not cast iron but a metal from a hardware store gate section that he could not identify; the finished wrench snapped when tested.
- —Molten metal work is extremely dangerous. The video is sponsored by Stanford Advanced Materials.
Parts to buy
7 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Melting iron in a microwave and casting an adjustable wrench16:03
Covers printing the PLA wrench pieces, making and curing the sand molds, burnout and pouring in the microwave kiln, assembly, and the test where the wrench snapped. The first attempt used a metal that was not cast iron. Sponsored by Stanford Advanced Materials.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the video for the crucibles, the kiln, mold making, burnout and pouring. (Pause frequently. There are no written instructions, and he says the kiln build is shown in his other videos.)
- 2.Source silicon carbide for the crucibles and the kiln rings.(This is the core material. He makes his own crucibles, buys silicon carbide in 25 kg bags and says a crucible costs him less than 2 euros in material.)
- 3.Set up a dedicated microwave, fireproof work surface, and ventilation.(This microwave will never be food-safe again. Work outdoors or in a well-ventilated workshop.)
- 4.Control the kiln with a cycle timer and a handheld thermometer, and take notes on every run.(That is how he controls the burnout in the video, with no PID controller.)
KNOWN ISSUES
- This video does not include construction drawings, dimensions or a materials list. He says he showed how to make the microwave kiln in his other videos.
- Silicon carbide is the key material. He makes his own crucibles from it and buys it in 25 kg bags; the video does not say which grade he uses.
- The first melt in the video was the wrong metal and the wrench failed under load. Identifying your metal stock and understanding its melting point is critical.
- Molten metal can explode if it contacts moisture. Sand and molds must be bone-dry.
- An ordinary microwave is not built to run a kiln. Treat it as a dedicated workshop tool and never use it for food again.
- Burning PLA releases fumes. Do this outdoors or with industrial ventilation, not in a kitchen.
Is this safe to do in a kitchen microwave?
No. The microwave will never be food-safe again, and you need fireproof surfaces, ventilation, and space for molten metal work. This is workshop or outdoor work.
Can I use this for aluminum or other metals?
The video casts iron. He mentions that aluminum and other metals have also been in his crucibles, and says he made carbon steel in a previous video by melting rebar.
Where do I get silicon carbide crucibles?
He makes them himself. He buys silicon carbide in 25 kg bags and says a new crucible costs him less than 2 euros in material. The video does not show how the crucibles are made.
Do I need a PID controller?
The video uses a simple cycle timer and a handheld thermometer. A PID would give more control but is not required for this proof of concept.
What if I do not have a 3D printer?
The video uses 3D printed PLA patterns that are burned out of the sand molds in the microwave kiln. It does not show any other way to make patterns.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
A lab furnace rated for 1700 C lists at about 8,998 dollars, and this uses an ordinary microwave — but the wrench snapped and the kiln build lives in other videos. What would you cast first to test it?
Shake the Future
Shake the Future is a YouTube maker who melts and casts metal in an ordinary microwave using homemade silicon carbide crucibles and a microwave kiln, which he says he showed how to make in his other videos. In this video he casts an adjustable wrench in iron.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM27d ago
Practical notes from our verification: this is a single YouTube video, not a repository, and no STL files, kiln plans or materials list are linked with it. The silicon carbide crucibles and kiln are shown in use; the creator says the kiln build is covered in his other videos. The first melt was not cast iron but a metal from a hardware store gate section that he could not identify, and the finished wrench snapped when tested, so the demonstration proves the heating method but not the structural result. The video is sponsored by Stanford Advanced Materials. If you already do lost-PLA casting and want to experiment with microwave heating, the footage gives you enough to start, but this is not a weekend project and the safety stakes are extremely high.