TURN A MICROWAVE INTO A 20,000 WATT OVEN THAT MELTS TUNGSTEN

A water-cooled magnetron pushed to 20,000 watts generates plasma hot enough to melt the metal with the highest melting point on earth.

by styropyro (Drake)

ScienceWorkshop

difficulty
●●●●●
time
several weekends
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

This is not a project you build; it is a demonstration of what is physically possible with industrial microwave hardware pushed far beyond rated spec. styropyro used a water-cooled 16,000 watt magnetron, drove it to 20,000 watts with a distribution transformer, and melted copper, titanium, and finally tungsten — proving the plasma reached at least 3,422°C. For context, a commercial 30 kW industrial microwave generator costs around €109,000 new. The video is fascinating and educational, but there is no repository, no BOM, no wiring diagram, and no safety protocol that would let someone replicate this safely at home. The single biggest reason people do not attempt this is also the correct one: microwave transformers store enough energy to kill instantly, the plasma produces toxic nitrogen dioxide gas, and one mistake with high voltage has no second chance. If your goal is to understand extreme microwave physics or see what industrial magnetrons can do, watch the video. If your goal is to build something, this is not the project.

GOOD TO KNOW

  • —This is a demonstration build documented on YouTube, not a how-to guide or repository.
  • —No CAD files, no BOM, no circuit diagrams, no step-by-step instructions.
  • —The video shows the result and explains the key components — water-cooled magnetron rated 16,000 watts, distribution transformer — but not how to wire or assemble them safely.
  • —Magnetrons are sold secondhand as heat exchangers; the builder does not link specific suppliers.
  • —No licence applies because there is no published design; this is a one-off experimental build.
  • —The builder explicitly warns that microwave power supplies are lethal and that hobby scientists killed by their projects were usually working with microwave components.

Parts to buy

6 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Water-cooled magnetron rated 16Find
  • 000W (sold as surplus heat exchangers)Find
  • Distribution transformer capable of powering itFind
  • Cooling systemFind
  • Suitable enclosureFind
  • High voltage safety equipmentFind

Can I build this?

Printnothing required
Buywater-cooled magnetron rated 16,000W (sold as surplus heat exchangers), distribution transformer capable of powering it, cooling system, suitable enclosure, high voltage safety equipment
Toolshigh voltage safety training, thermal imaging, fume extraction, eye protection rated for plasma arcs, electrical test equipment
Skillsexpert-level high voltage electrical work, industrial safety protocols, understanding of magnetron operation and cooling requirements
Timeseveral weekends to source parts and assemble, assuming you already have the electrical knowledge — learning high voltage safety from scratch would take months
Cost$$$ — the magnetron alone is hundreds, the transformer is more, and that is before cooling, shielding, and safety equipment
SafetyThis is one of the most dangerous projects on the catalogue. Microwave transformers and magnetrons operate at lethal voltages with stored energy that kills instantly. The plasma produces nitrogen dioxide gas, which is toxic. The builder explicitly states that hobbyists killed by their own projects were usually working with microwave components. Do not attempt this without professional high voltage training and a reason better than curiosity.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

20,000 watt microwave melts tungsten

The primary source video showing the build and the tungsten melt test, with safety warnings at the start.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the full video and the safety warnings at the start (The builder explains why microwave projects kill people — watch that part twice.)
  2. 2.Do not proceed unless you have professional high voltage training(This is not a weekend Arduino project. One mistake with these voltages is fatal.)

KNOWN ISSUES

  • There are no build files, no wiring diagrams, no BOM, and no assembly instructions. The video shows what was built, not how to build it safely.
  • Water-cooled magnetrons sold as surplus heat exchangers are not sold with specs, safety documentation, or any guarantee they still work. You are reverse-engineering industrial hardware with no manual.
  • The transformer must deliver 20,000 watts safely and you need to understand load matching, cooling, and fault protection. Getting this wrong means fire or electrocution.
  • Microwave transformers have no current limiting. They will deliver every amp they can into a short circuit, through you, until something burns or you stop conducting.
  • The plasma produces nitrogen dioxide, which is toxic. You need proper fume extraction or you are poisoning yourself while you work.
  • Assuming this can be done safely in a home workshop because the video makes it look simple. The video shows the result. It does not show the years of electrical experience or the near-misses.

Is there a repository with build files?

No. This is a demonstration documented on YouTube, not a released open-source design. There is no BOM, no schematic, no 3D files.

Where do I buy a 16,000 watt magnetron?

They are sold secondhand as surplus industrial heat exchangers. The video does not link a supplier, and they come with no specs or guarantees.

Can I use a normal microwave transformer?

No. A household microwave transformer outputs around 2,000 volts at 0.5 amps, which is already lethal. This build uses a distribution transformer capable of far higher power. Using the wrong transformer will either not work or will fail catastrophically.

How much does it cost?

Hundreds for the magnetron and transformer, plus cooling, shielding, and safety equipment. For comparison, a commercial 30 kW industrial microwave generator costs around €109,000.

What is the actual risk?

Instant death from electrocution, toxic gas exposure, burns from plasma or molten metal, and fire. The builder states explicitly that hobby scientists killed by their projects were usually working with microwave components. This is not hyperbole.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

The plasma reached at least 3,422°C — hot enough to melt tungsten, the highest melting point of any metal. If you had access to this kind of power (and survived using it), what would you actually test?

CompareeTEAM27d ago

Practical notes from our verification: this is a demonstration, not a how-to, and there is no repository or build guide. The video is on styropyro's personal YouTube channel and the Instagram handle is @styro.drake. We cross-referenced the tungsten melting point claim (3,422°C) and it checks out — the wire beading on camera is proof the plasma hit at least that temperature. The biggest thing the video does not show: how many attempts it took to get this running safely, or what the near-misses looked like. The warning about microwave-related hobbyist deaths is real and documented. If you watch this and think 'I could do that,' watch the safety section again.

styropyro (Drake)

styropyro is a chemist and YouTuber known for high-power laser and plasma builds that push hardware far beyond rated limits. This microwave build is part of a series testing what industrial magnetrons can do when driven to extremes.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.