BUILD A BIKE WITH MAGNETS INSTEAD OF SPRINGS
A bicycle whose suspension is nothing but repelling magnets, with visible gaps where springs would be.
by Colin Furze
- difficulty
- ●●●●●
- time
- several weekends
- license
- license not specified
- repo
- repo
●●●●● · several weekends · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
Colin Furze built a bicycle whose suspension is nothing but repelling magnets, with visible gaps instead of springs. Riding squeezes the pivoting frame together; his scale test measured 30, 45 and 70 kg depending on position, so he needed at least 35 kg of repulsion. His first neodymium magnets gave only about 8 kg, and a pair of 50 mm cube magnets with 208 kg of pull was still not enough on its own. His first attempt (Mark 1) was a frame from a scrapyard bike: the thin tubing flexed and twisted, and the magnets tore out a 3D printed wedge and snapped together. The final bike is a different build: a new frame of thicker stainless steel tube, which is not magnetic and does not flex like the first one, with bespoke 500 kg magnets from Magnet Store, double stacked. It bobs along and soaks up small imperfections, but on a pump track the frame joints bent, and there is no damping. This is not a build guide: the video gives no frame dimensions, magnet mounting details or plans. The one thing most likely to go wrong is handling the magnets: one pulled itself out of his hand and nearly trapped his skin, and magnets this strong crush fingers.
IN THE REPO
GOOD TO KNOW
- —This is a YouTube demonstration build, not a repository project.
- —No CAD files, parts list, frame geometry, magnet mounting details or assembly instructions are published.
- —Colin Furze's video shows the build process but does not provide reproducible plans.
- —The 500 kg magnets were bespoke, made by Magnet Store for this build.
- —No licence because there are no published design files.
- —This page exists because the core idea is buildable, but you will be designing your own frame and magnet mounts from scratch.
Parts to buy
4 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Magnet suspension bike (Colin Furze)
Colin Furze's build video: scale test, magnet tests, the failed first attempt on a scrapyard frame (Mark 1), the bespoke 500 kg magnets, the new stainless frame and the ride tests including the pump track. Not a step-by-step guide.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the full video to understand the forces and why the first frame failed (Pay attention to the scale test at 02:22-03:43 and the frame flex failure at 13:34-15:21.)
- 2.Design your pivot geometry and measure the compression force you need to counteract(Colin measured 30, 45 and 70 kg depending on rider position. Your frame will be different.)
- 3.Test the repulsion of your magnets against the force you measured before mounting them(His first neodymium magnets gave about 8 kg and one pair of 208 kg cube magnets was not enough alone; the final bike uses bespoke 500 kg magnets, double stacked. Magnets this strong crush fingers.)
- 4.Plan a new frame from thicker stainless steel tube instead of converting an old frame(The scrapyard frame flexed and the magnets locked onto steel parts. Colin built the final bike as a new frame of thicker stainless steel tube, because stainless is not magnetic.)
KNOWN ISSUES
- Buying magnets before measuring your frame's squeeze. Colin measured 30 to 70 kg depending on position, and his first neodymium magnets gave only about 8 kg of repulsion.
- Building on an old thin frame. Colin's scrapyard Mark 1 flexed and twisted under the magnets, and steel parts kept grabbing them, which is why the final bike is a new frame of thicker stainless steel tube.
- Underestimating the 500 kg magnets. One pulled itself out of Colin's hand onto the bench and nearly trapped his skin; they crush fingers, pull tools out of your hand and grab keys from your pocket. Plan how you will handle and separate them before they arrive.
- Expecting this to ride like a damped bike. There is springing but no damping, so it bobs, and on a pump track the frame joints bent.
- Copying the big gaps as if they were required. Colin admits they are partly for the YouTube thumbnail and partly to prove there are no hidden springs, and he asks for ideas to make it work better.
- Treating this as a commuter or trail bike. It is a proof of concept that is great for everyday riding on smooth ground, but it found its limit on long steps and a pump track.
Can I buy the magnets he used?
They were bespoke magnets that Magnet Store made for this build, with 500 kg of pulling force, double stacked. The video does not say whether they are sold as a standard product.
Why stainless steel instead of regular bike tubing?
Stainless steel is not magnetic, so the 500 kg magnets do not lock onto the frame while you build it. The tube is also thicker, because the first attempt on a scrapyard frame (Mark 1) flexed and twisted under the magnets.
Does it actually work as suspension?
It springs: the bike bobs along, glides over rough ground and soaks up small imperfections. But it is springing without damping, and on a pump track the frame joints bent. Colin says it is not the magnets that fail but the joints and the frame. It proves the concept, it is not a replacement for conventional suspension.
How dangerous are the magnets?
Very. One of the 500 kg magnets pulled itself out of Colin's hand onto the bench and nearly trapped his skin, and getting it off took wooden wedges. Magnets like these crush fingers, so keep hands, tools, phones and keys well away and plan how you will handle them before they arrive.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
Colin's first magnets gave only about 8 kg of repulsion, and the final bike needed bespoke 500 kg magnets on a new stainless frame. How would you keep the visible gap but stop the frame joints from bending?
Colin Furze
Colin Furze is a YouTube creator known for extreme builds. He has made jet bikes, bikes that change shape, a bike with ice for wheels and a bicycle of springs, and dug an underground system in his front garden. This magnet bike took two attempts: a scrapyard frame first, then a new stainless frame.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM26d ago
Practical notes from our verification: this is a YouTube build with no repository, no CAD files and no published frame geometry, so the page documents the concept and the forces involved rather than giving a build guide. Do not mix up the two bikes: the scrapyard frame was the first attempt (Mark 1), which flexed and tore out a 3D printed wedge; the bike that works is a new frame of thicker stainless steel tube with bespoke 500 kg magnets. Even that bike bent its frame joints on a pump track. The biggest risk is the magnets themselves: one pulled itself out of Colin's hand and nearly trapped his skin.