BUILD A 25 HORSEPOWER UNDERWATER JETPACK

Two boat thrusters on a battery tube that pulls a swimmer at 18 km/h, almost as fast as a 17,800-dollar Seabob.

by CPSdrone

RoboticsWorkshop

difficulty
●●●●●
time
several weekends
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

CPSdrone built a 25 horsepower underwater jetpack that reached a final speed of 18 km/h, just shy of a Seabob's 20 km/h. It is a waterproof battery tube with two electric boat thrusters mounted on the sides, speed modes from 1 to 4, and custom 3D-printed propellers. Their first version only managed 11.3 km/h, so they upgraded the controllers (each motor went from 50 to 60 kg of thrust) and metal-printed the motor mounts. They also rode it in the sea in Croatia. At top speed the pressure hurt their ears. Water leaked into the battery tube once. They missed their own 25 km/h target. There are no CAD files, no BOM, no firmware, no build instructions. You have a 19-minute YouTube video and that is it. If you want to replicate this, you are reverse-engineering thruster models, battery pack voltage, controller specs, sealing methods and ballast from footage alone. This is for someone who has already built high-power electric vehicles, knows how to waterproof high-current connections, and is comfortable designing their own battery management.

GOOD TO KNOW

  • —No repository or design files available — this is a video-only build.
  • —No bill of materials, no wiring diagrams, no firmware source.
  • —You will have to reverse-engineer thruster models, controller specs, battery configuration and waterproofing from the footage.
  • —No licence information — this is not an open-source project in the formal sense.
  • —This is a documentation page for a build shown on YouTube, not a replicable guide.

Parts to buy

5 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Two electric boat thrustersFind
  • Motor controllersFind
  • Large lithium battery packFind
  • Waterproof tube and sealsFind
  • Speed controllerFind

Can I build this?

PrintCustom propellers and motor mounts (material and printer type not specified in the video)
BuyTwo electric boat thrusters, motor controllers, large lithium battery pack, waterproof tube and seals, speed controller — exact models not given
Tools3D printer, metal printer (for motor mounts), tools for high-current wiring, waterproofing equipment, pool or sea access for testing
SkillsHigh-power electric vehicle assembly, lithium battery pack building, waterproofing, underwater vehicle design — this is not a beginner project
TimeSeveral weekends to reverse-engineer parts, assemble, waterproof, test and debug —
SafetyLithium batteries underwater are a serious risk. A seal failure or pack damage can cause thermal runaway in an environment where you cannot surface quickly. Ear pain at speed indicates pressure issues. High-current connections in saltwater are a short-circuit and corrosion risk.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

CPSdrone underwater jetpack build18:23

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the full YouTube video (This is the only documentation — pause and take notes on thruster models, battery configuration and waterproofing visible in the footage)
  2. 2.Source boat thrusters rated for 50-60 kg thrust each
  3. 3.Design or source a waterproof battery tube
  4. 4.Build and test a lithium pack that can deliver 25 horsepower

KNOWN ISSUES

  • No BOM or part numbers — you are guessing thruster models, controller specs and battery voltage from video footage alone.
  • Waterproofing a high-current lithium pack is harder than it looks. The video shows a leak that got water into the battery tube. One bad seal and you have a thermal runaway risk underwater.
  • At top speed the water pressure hurt their ears, so speed underwater is physically uncomfortable.
  • They missed their own 25 km/h target, so do not expect to match a Seabob.

Is there a GitHub repository or downloadable files?

No. This is a video-only build with no CAD, firmware or BOM released.

What thrusters did they use?

Not specified in the video.

How much does it cost?

Not published. They did not share a parts list or total cost.

Is it faster than a Seabob?

No. The Seabob F5 SR does 20 km/h underwater. This hit 18 km/h and missed the team's own 25 km/h target.

Is it safe?

Water leaked into the battery tube once.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

Two thrusters, 60 kg of thrust each, 18 km/h — but no files, no BOM, and water once leaked into the battery tube. Would you attempt a reverse-engineer, or is a video-only build with lithium underwater a hard pass?

CompareeTEAM10d ago

We verified the YouTube video and the 5.3 million view count as of January 2026. The Instagram handle @cpsdrone matches the attribution in the reel. There is no repository, no project page, no published files. The video shows the full build process but never lists part numbers or links to suppliers. The 18 km/h final speed is real,

CPSdrone

CPSdrone builds powerful underwater and electric machines and documents them on YouTube. This is version two of their underwater jetpack, published in January 2026, tested in a pool and in the sea in Croatia.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.