TURN METAL POWDER INTO SOLID PARTS IN YOUR GARAGE
A garage-built laser metal printer that melts metal powder layer by layer, the same way 700,000 dollar factory machines do, for about 23,320 dollars.
by Travis Mitchell
- difficulty
- ●●●●●
- time
- months of machining and integration
- license
- license not specified
- repo
- repo
●●●●● · months of machining and integration · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
Travis Mitchell built a selective laser melting (SLM) machine in his garage that works like the industrial EOS M 290, which costs 700,000 dollars installed. One jaw broke during printing, and the video does not say why. This is a documentation and proof-of-concept series, not a build guide. No files, firmware, or instructions are available yet, and Mitchell has not said when or if they will be. The machine also requires handling a 500 W fiber laser, inhalable metal powder, and pressurised argon, all of which can cause permanent injury if mishandled. If you want to follow the design decisions and see what it takes to build an SLM printer from scratch, this is the most detailed public build series available. If you want to replicate it, you are on your own until files are released, and the safety requirements are not casual.
IN THE REPO
GOOD TO KNOW
- —This is a video build series, not a repository. Part 9 shows the machine printing metal gripper jaws.
- —No CAD files, BOM, firmware or build guide have been shared yet. Travis Mitchell says the 3D models are not released.
- —Skyfire sponsored the laser components and PCBWay machined the aluminum parts. His 23,320 dollar total is the cost breakdown he shows in the video.
- —One of the two gripper jaws broke off during the 5-hour print, and the causes are not explained in the video.
- —No licence is stated because no files are published.
- —The machine uses a 500 W fiber laser, fine metal powder and an argon atmosphere. All three are serious hazards.
Parts to buy
5 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
DIY Metal 3D Printer: Part 9
Part 9 of the build series, showing the machine printing metal gripper jaws for a robot arm. Earlier parts cover the frame, laser, powder system and argon chamber.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the full video series from Part 1 to understand the frame, laser setup, powder system and argon chamber before attempting anything. (Part 9 is the latest as of December 2025. No files are released yet.)
- 2.Do not buy anything until you have confirmed the laser, galvo and motion components will work together, and you have a plan for argon containment and powder handling.(His cost breakdown at 16:03 lists the main components: laser, galvo, chiller, motion, controller, oxygen analyzer and the gas recirculation blower.)
- 3.If you have never worked with high-power lasers or inhalable metal powders, find someone who has before you start designing your own machine.(The first mistake with either system can be permanent.)
KNOWN ISSUES
- No files, BOM or build instructions are available. If you proceed, you are reverse-engineering from video footage and designing every detail yourself.
- The 23,320 dollar total is his parts list; powder, argon and about 400 dollars of post-processing equipment come on top, and the laser components were sponsored by Skyfire.
- One of the two gripper jaws broke off during printing, and the video does not explain why. Print failures are part of the tuning process, but without the design files or parameter details, you will be debugging from scratch.
- Metal powder is an inhalation and explosion hazard. It must be handled in controlled airflow, never in open air, and static discharge can ignite it.
- A 500 W fiber laser can blind you or burn through skin in a fraction of a second. Laser safety glasses rated for the wavelength, interlocks, and enclosed beam paths are not optional.
- Argon displaces oxygen. If the chamber leaks or you open it in a small room without ventilation, you can lose consciousness before you realise what is happening.
When will the files be released?
Travis Mitchell says in the video that the 3D models are not shared yet, and he has not given a timeline. If you want to build this, you are waiting or designing your own.
What metal can it print?
The video does not name the alloy used for the gripper jaws. SLM machines typically print stainless steel, aluminium alloys, titanium or tool steels, but each requires different laser power, scan speed and powder particle size.
How does the cost compare to a commercial machine?
Engineering.com put the EOS M 290 at about 700,000 dollars including delivery, installation, training and a year of service. Travis lists his build at about 23,320 dollars, which includes the laser components Skyfire sponsored. Powder (550 dollars per 10 kg), argon and about 400 dollars of post-processing gear come on top.
Can I build this without a machine shop?
It's hard. PCBWay machined the aluminum parts for him, and the laser, galvo and motion system need careful alignment. Expect to outsource machining if you don't have the tools.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
A test print took 1 hour 40 minutes for 460 layers, and the gripper jaws took over 5 hours for 1,000-plus layers — one of which broke off. If you were tuning this machine, what would you change first to improve reliability?
Travis Mitchell
Travis Mitchell is documenting his build of a selective laser melting machine in his garage, showing what it takes to replicate a 700,000-dollar industrial process for a fraction of the cost. Part 9 of the series shows the machine printing metal gripper jaws for a robot arm.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM1d ago
Practical notes from our verification: this is part 9 of a video build series, and no CAD files, BOM or build guide are public yet. His cost breakdown of about 23,320 dollars covers the laser, galvo, motion, electronics and gas system, with the laser parts sponsored by Skyfire and machining by PCBWay. A 500 W fiber laser, fine metal powder and argon are serious hazards, so treat this as a series to learn from, not a weekend build.