MAKE AN IPHONE 15 PRO RUN 23% FASTER

DirectorFeng added copper, graphene foil and thermal gel to an iPhone 15 Pro, and AnTuTu scores jumped from 1.55 million to 1.92 million.

by DirectorFeng

Workshop

difficulty
●●●●●
time
a full day
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

This is a thermal modification for people who already know how to open and reassemble an iPhone 15 Pro without breaking it. DirectorFeng lined the motherboard and the back of the display with graphene nano copper foil, applied thermal gel to every hot component, and fabricated a custom pure copper baffle over the A17 Pro processor. The whole mod adds 6 grams. Stock AnTuTu runs started at 1,554,051 and dropped to 1,424,041 as the phone heated up. After the mod the best run hit 1,916,474 and held around 1.9 million, about 23 percent higher than the starting score. The video is detailed and the results are measured, but it is a demonstration, not a tutorial. There is no written guide, no materials list, no copper plate drawing. The battery was swapped at the same time, so part of the gain may come from that. The single biggest trap is assuming this is something you can replicate without phone repair experience — you cannot. If you have never opened an iPhone this far, this is the wrong first project. If you have, the video shows enough to attempt it, but you will be improvising the copper plate and sourcing the foil yourself.

GOOD TO KNOW

  • —This is a demonstration video, not a build guide.
  • —No CAD files, BOM, instructions or parts list are provided.
  • —The copper plate was custom-made; dimensions and fabrication method are not documented.
  • —Graphene copper foil, thermal gel brands and exact application technique are shown on screen but not written down anywhere.
  • —The battery was also replaced during the mod (old health 83%), so the performance gain is not purely thermal.
  • —This voids your warranty and requires genuine phone repair skills — opening an iPhone 15 Pro this far is not a beginner task.

Parts to buy

5 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Graphene nano copper foilFind
  • Thermal gelFind
  • Replacement battery (SeFu 3420mAh shown)Find
  • Custom pure copper plate (fabricate or source)Find
  • IPhone opening toolsFind

Can I build this?

Printnothing required
Buygraphene nano copper foil, thermal gel, replacement battery (SeFu 3420mAh shown), custom pure copper plate (fabricate or source), iPhone opening tools
Toolsprecision screwdrivers, heat gun or hairdryer, spudger set, tweezers, suction cup, metal fabrication tools for the copper plate
Skillsgenuine phone repair experience — soldering is not required, but disassembly and reassembly of an iPhone 15 Pro absolutely is, plus metalworking for the copper plate
Timea full day if you have done this before, longer if you are fabricating the copper plate from scratch
Cost$$ — mostly the replacement battery and the custom copper plate; the video doesn't list prices for the foil or gel
SafetyLithium battery — puncturing it during disassembly is the real risk. Work in a ventilated area, have a plan for a battery fire (sand bucket, not water), and never force anything. This voids your warranty completely.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

DirectorFeng iPhone 15 Pro cooling mod

Full teardown and thermal mod process shown on screen with subtitles. Stock scores at start, mod assembly from 13:20, weight check at 20:00, final scores in description. No spoken English, but the work is clear.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the full video (The only documentation is the video itself. Watch it fully before buying anything — you will need to pause and screenshot details.)
  2. 2.Source the graphene copper foil and thermal gel(The video shows them applied but does not name brands. Search for graphene nano copper foil sheets and high-performance thermal gel for phones.)
  3. 3.Fabricate or source the copper plate(The custom copper baffle is shown fitted over the A17 Pro at 16:40-18:20. You will need to measure your own phone or work from the video.)
  4. 4.Decide if you are swapping the battery too(The mod in the video included a new SeFu 3420mAh battery (old one was at 83% health). If you are not replacing it, your results will differ.)

KNOWN ISSUES

  • This is not a beginner phone repair. If you have never opened an iPhone 15 Pro, do not start here — the display cables are fragile and the battery adhesive is strong.
  • The copper plate is custom. There is no file, no dimension drawing, no source to buy one. You will have to fabricate it or find someone who can.
  • The battery was replaced during the mod. The 23% gain is thermal plus a fresh battery, not thermal alone.
  • Graphene copper foil and thermal gel brands are not named. You will have to source equivalents and trust they perform the same.
  • AnTuTu scores are not real-world performance. A 23% higher benchmark does not mean 23% faster at anything you actually do with the phone.
  • Warranty is void the moment you open the phone. Apple will refuse all service if they see this mod.

Will this make my phone faster in daily use?

It will reduce thermal throttling under sustained load (gaming, video export, benchmarks). For normal tasks you will not notice a difference.

Can I do this without replacing the battery?

Yes, but the results will be different. The video's 23% gain includes a battery swap from 83% health to new.

Where do I get the copper plate?

It was custom-made. You will need to measure the A17 Pro area and fabricate one, or find a metal shop that can cut pure copper sheet to size.

Does this void the warranty?

Completely. Apple will refuse service the moment they see the phone has been opened.

Is there a parts list?

No. The video shows graphene nano copper foil, thermal gel, a SeFu 3420mAh battery and a custom copper plate, but brands and sources are not documented.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

Stock AnTuTu runs dropped from 1.55 million to 1.42 million as the phone heated up — after the mod it held around 1.9 million. Have you noticed thermal throttling on your own phone, and would a cooling mod like this be worth the warranty trade-off?

CompareeTEAM14d ago

Practical notes from our verification: this is a demonstration video, not a build guide, and there is no repository or written documentation anywhere. The copper plate was custom-fabricated and the exact graphene foil and thermal gel brands are not named. The battery was also swapped during the mod (old health 83%, new SeFu 3420mAh), so the 23% benchmark gain is thermal performance plus a fresh battery combined. The single biggest decision before attempting this is whether you have genuine iPhone repair experience — if you have never opened a modern iPhone this far, the display cables and battery adhesive will punish you. The video is clear and the measurements are honest, but you will be improvising the copper plate yourself.

DirectorFeng

DirectorFeng is a phone repair and modification specialist who documents teardowns and performance mods on YouTube. This iPhone 15 Pro cooling build was a response to thermal throttling complaints from a customer.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.