TURN A SMASHED PHONE INTO A 4K HOME CINEMA PROJECTOR

A smashed phone with a 4K screen, a 100 W LED, and three lenses can put every pixel sharp on your wall — if you have the metalworking patience.

by Matt (DIY Perks)

DisplaysHome

difficulty
●●●●●
time
long multi-stage build (no build time given in the video)
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

This is a genuinely impressive 4K projector built around a phone screen, and the image quality is real: on the wall you can see every pixel of the panel, sharp right up to the corners. It runs full Android, so it can stream YouTube on its own, and the commercial cinema projector it was compared against costs ten times as much. The catch is that it is made for a dark room: a light that is on or an uncovered window kills the image, because the LCD panel still blocks quite a lot of light. The commercial unit is much brighter, but also has a lot more fan noise. Building it means cutting aluminium layers on four threaded rods, dismantling a phone and removing its backlight without peeling off the polarizing layer, and positioning the Fresnel lenses and the projection lens precisely. The phone must be LCD (not OLED) and support USB OTG for a mouse and keyboard. The parts are linked in the video description and Matt's PDF guide is on his Patreon. If you have a dark room and the patience for careful positioning, this is a real 4K projector at a fraction of the retail price. If you want to watch in a room with daylight, buy a commercial projector.

GOOD TO KNOW

  • —No repository. The project is documented in a roughly 28-minute YouTube video (about 9.7M views) and a PDF guide on the creator's Patreon.
  • —A parts list is in the video description.
  • —The video is sponsored by Skillshare; the PDF guide is on Matt's Patreon.
  • —No CAD files, no PCB, no code — this is metalwork, optics, and phone disassembly.
  • —No open-source licence is stated, and there is no repository.
  • —The phone must be LCD (not OLED) and support USB OTG. Matt's Sony Xperia Z5 Premium had a smashed back, which made it a very cheap eBay buy; the 4K panel also appears on eBay separately with an HDMI control board, but it is rather expensive.

Parts to buy

12 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • 100 W high-CRI COB LED with its power boardFind
  • Desktop CPU tower heatsinkFind
  • Set of Fresnel lenses (collimating and converging)Find
  • Old large-format camera lensFind
  • Front surface mirrorFind
  • Aluminium sheetFind
  • Four threaded rods with pillar spacers and nutsFind
  • GT2 timing belt and pulleys for focusingFind
  • FansFind
  • 4.2 V step-down boardFind
  • 1 farad capacitorFind
  • Laptop power brick (120 W or more)Find

Can I build this?

PrintNo 3D printing required; Matt 3D printed the side-panel clips, but they can be made from wood
BuySony Xperia Z5 Premium (LCD, USB OTG) or a smartphone LCD with an HDMI control board; 100 W high-CRI COB LED with its power board (a voltage booster); desktop CPU tower heatsink; set of Fresnel lenses (collimating and converging); old large-format camera lens; front surface mirror; aluminium sheet; four threaded rods with pillar spacers and nuts; GT2 timing belt and pulleys for focusing; fans; 4.2 V step-down board; 1 farad capacitor; laptop power brick (120 W or more)
Toolsmetal cutting and drilling tools for the aluminium layers; soldering iron; phone disassembly tools; tape and epoxy for mounting the panel
Skillsmetalworking, careful optical positioning, phone disassembly, basic soldering and setting up an LED power board
Timea long multi-stage build; the video does not give a build time
Cost$$ — the commercial projector it is compared with costs 2,000 dollars, ten times the price of the build; Matt's phone with a smashed back was a very cheap eBay buy, and a high-CRI LED costs a bit more but is worth it
SafetyLow-voltage power from a laptop power brick, but the 100 W LED gets very hot and needs the big heatsink and fans. If you measure the collimator's focal length with the Sun, never look at the focused point (it set a dry stick on fire); watch through a phone camera covered with tape that has a pinhole. Do not add a reflector behind the LED: it sends heat to the screen and can damage it.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

Building a TRUE 4k home cinema projector (DIY Perks)28:10

About 28-minute build walkthrough, sponsored by Skillshare; parts linked in the description

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the full YouTube video (About 28 minutes; parts are linked in the description)
  2. 2.Check the Patreon for the PDF guide (Contains the measurements, tools and component guides)
  3. 3.Find a Sony Xperia Z5 Premium with a smashed back(Any phone works only if it is LCD (not OLED) and supports USB OTG; a 2560 by 1440 LCD with an HDMI control board is the cheaper alternative Matt suggests)
  4. 4.Source the LED, heatsink, lenses, and aluminium(Choose a high-CRI LED; an old CPU tower cooler works as the heatsink, Fresnel lenses come as sets for DIY projectors, and old large-format camera lenses are cheap on eBay)

KNOWN ISSUES

  • Buying an OLED phone instead of an LCD one: an OLED panel will not work for this job.
  • Buying a phone that does not support USB OTG — you will not be able to control it without OTG.
  • Peeling off the reflective layer stuck to the back of the screen while removing the backlight: it is the polarizing layer, and the screen shows nothing without it.
  • Misaligning the optical path — the Fresnel lenses and projection lens must be precisely aligned or the image will be dim or blurry.
  • Expecting it to work in a bright room: the LCD panel blocks quite a lot of light, so a light that is on or an uncovered window kills the image.
  • Underestimating the metalwork — the aluminium case and lens mounts require careful cutting, drilling, and alignment.

Can I use a different phone?

Yes, as long as it uses an LCD panel (not OLED) and supports USB OTG, so you can plug in a mouse and keyboard. Matt used the Sony Xperia Z5 Premium because it has a 4K screen. He also suggests a cheaper route: a small 2560 by 1440 smartphone LCD from eBay with an HDMI control board.

How bright is it compared to a commercial projector?

Much dimmer. The video compares it to a 2,000 dollar cinema projector that is much brighter. This build only works in a dark room.

Can I use a phone with a cracked screen?

Matt's phone had a smashed back, which made it a very cheap eBay buy. The LCD panel itself is the image source and is blown up about a thousand times on the wall, so the panel needs to be intact.

Where do I get the PDF guide?

Matt made a PDF guide available on his Patreon. It contains the measurements, the tools you need, guides for the different components and extra tips. The video description links the parts.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

The commercial projector Matt compared this to costs 2,000 dollars and is much brighter, but this one streams YouTube natively and costs a tenth as much. Would you trade brightness for the satisfaction of building it yourself?

CompareeTEAM28d ago

Practical notes from our verification: the video has about 9.7 million views, the parts are linked in its description, and Matt's PDF guide with measurements and tools is on his Patreon. There is no repository, no CAD files and no open-source licence. The phone has to be LCD (not OLED) with USB OTG; Matt's Sony Xperia Z5 Premium was cheap because it had a smashed back. The single biggest warning is that this is a dark-room projector: a light that is on or an uncovered window kills the image because the LCD blocks quite a lot of light. Matt also warns against adding a reflector behind the LED, because it sends more heat than light to the screen and can damage it.

Matt (DIY Perks)

Matt runs the DIY Perks YouTube channel. In June 2020 he built a homemade 4K home cinema projector around the 4K LCD of a Sony Xperia Z5 Premium phone, then compared it with an off-the-shelf cinema projector that costs 2,000 dollars, ten times the price of his build.

Web

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.