BUILD YOUR OWN ELECTRIC AIRPLANE AND FLY IT

Peter Sripol built an electric ultralight with aluminium-and-foam wings that flew on just 11 kilowatts and cruises at a comfortable 30 mph.

by Peter Sripol

WorkshopEnergy

difficulty
●●●●●
time
a full aircraft build with several test flights; the video gives no build time
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

This is a build diary, not a project you can copy. Peter Sripol's MK4 electric ultralight uses ladder-style wings made from two aluminium tubes with hot-wire-cut foam, covered in vinyl to keep weight down, and a wing panel came in at about 21 pounds. The wing survived a sandbag load test to about 900 lb, a little over 3 g. The electric system runs at 92 volts. It flew on 11 kilowatts on the first flight, but the propeller pitch was too flat to accelerate and the elevator fluttered at around 35 mph. After switching to a three-bladed propeller with more pitch and adding three feet to the wingspan, it cruised at a comfortable 30 mph drawing about 80 to 90 amps. The creator says he is not releasing plans, sized much of the structure by eye, and has no idea how long the vinyl-and-foam wings will last. The biggest barrier is not the aluminium or the motor: this is an experimental aircraft in the ultralight class, which has its own rules, and flight testing anything you build yourself is risky. If you have fabrication skills and aviation experience, the video is inspiring. If you do not, start with something that stays on the ground.

GOOD TO KNOW

  • —This is a documented build from a YouTube video, not a repository with files.
  • —There are no CAD files, no BOM, no wiring diagrams, and no step-by-step instructions.
  • —The video shows the construction process and flight testing but is not a tutorial.
  • —The creator says the MK4 sits in the ultralight class; ultralights have their own rules, which vary by country.
  • —The creator says on camera that he is not releasing plans for this build.
  • —Flying any homebuilt aircraft is risky; the creator calls this one a very big experiment.

Parts to buy

7 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Video shows aluminium tubingFind
  • Hot-wire-cut foamFind
  • Vinyl coveringFind
  • 92 volt battery systemFind
  • Electric motorFind
  • Three-bladed propellerFind
  • Basic components of the kind used on traditional ultralightsFind

Can I build this?

Printnothing required
BuyThere is no parts list. The video shows aluminium tubing, hot-wire-cut foam, vinyl covering, a 92 volt battery system, an electric motor, a three-bladed propeller, and basic components of the kind used on traditional ultralights.
ToolsThe video shows a hot wire for cutting foam, machined spacers for the wing extension, a scale for weighing wing panels, an amp meter on the power system, and sandbags for the wing load test.
Skillsaircraft construction, electrical system integration, foam shaping, aluminium fabrication, aviation knowledge, pilot training
TimeNot stated in the video. It is a full aircraft build with a load test, several flight tests and modifications between flights.
Cost$$$: the video gives no total. The creator calls it a very expensive project because of the batteries and electric motor; the wings cost little beyond the aluminium tubing. For comparison, the Pipistrel Velis Electro, the first type-certified electric airplane, costs about 159,000 euros in standard configuration.
Safety92 volt battery system that sparks hard if reconnected carelessly; the creator added a pull-to-disconnect kill switch. Flight risk is real: on the first flight the propeller pitch was too flat to accelerate and the elevator fluttered, climb stayed weak on the later flight, and a hand-toss parachute needs roughly 500 to 1,000 ft to deploy. Ultralights have their own rules and you need to know how to fly. This is not a beginner project.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

Homemade Electric Airplane MK4

25 October 2020. Build diary and flight testing: vinyl wing covering, sandbag load test, electric motor install, first flight, wing extension and propeller change, then the 30 mph cruise flight. Not a step-by-step tutorial.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the MK4 video to understand the construction approach (This is documentation of a build, not instructions)
  2. 2.Research ultralight aircraft regulations in your country(Rules vary widely and affect what you can legally build and fly)
  3. 3.Get pilot training before attempting to fly anything you build(Even ultralight aircraft require understanding of flight principles and safety)

KNOWN ISSUES

  • There are no plans, BOM or cut lists, and the creator says he is not releasing plans for this build. You would be reverse-engineering from video footage.
  • The creator says the MK4 sits in the ultralight class. Ultralights have their own rules and those differ by country, so check what applies where you live before you build or fly.
  • The creator admits much of the structure was sized by eye, which he calls horrible for airplane design. He relied on his own airplane-building experience, aeronautical friends checking it, and a sandbag load test to about 900 lb, and says not to get ideas about doing this yourself yet.
  • The 92 volt system sparks hard if you reconnect it without a spark suppressor. The creator fitted a pull-to-disconnect kill switch in case the motor runs away.
  • Flight testing is where it gets dangerous. On the first flight the propeller pitch was too flat to accelerate and the elevator leading edge fluttered at around 35 mph. The creator stayed low because climb was weak and his hand-toss parachute needs roughly 500 to 1,000 ft to deploy.
  • The vinyl-covered foam wing is an untested method. The creator says it could last 2 or 3 years or fail within a couple of days if left out in the sun, and that he has no idea how long it will last.

Are there plans or a parts list?

No. The creator says on camera that he is not releasing plans for this build. The video is a build diary and flight test, with no dimensions, parts list or wiring diagram.

Do I need a pilot's licence to fly this?

The video does not cover licensing. The creator says the MK4 sits in the ultralight class, and ultralight rules differ by country, so check with your national aviation authority. Either way, you need to know how to fly before you test anything like this.

How much does it cost to build?

The video gives no total. The creator says there is not a lot of money in the wings, where the aluminium tubing is the most expensive part, but calls the whole project very expensive because of the batteries and electric motor.

Can I use a different motor or battery voltage?

The video only shows this one setup: a 92 volt system that flew on 11 kW the first time, with around 18 kW available at full power after the propeller change. There are no plans, so any other motor or battery choice would be your own design.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

The MK4 flew on just 11 kilowatts on its first flight, then settled into cruising at 30 mph after a propeller change and longer wings. If you were building an electric ultralight from scratch, would you start with low power and add more, or design for the cruise power you want from day one?

CompareeTEAM28d ago

Practical notes from our verification: there is no repository, no CAD and no BOM, and the creator says on camera that he is not releasing plans. The video (hp7JcmwKQcU, 25 Oct 2020) is a build diary and flight test, not a tutorial. The Instagram handle @petersripol is credited with the footage. The biggest surprise is how little power it flew on: 11 kW on the first flight, with a comfortable 30 mph cruise at about 80 to 90 amps after a propeller change and a three-foot wing extension. The first flight also showed elevator flutter around 35 mph, which is a good reminder that this is an experiment, not a first build for anyone.

Peter Sripol

Peter Sripol is a YouTube maker who built and flight-tested the MK4, a homemade two-axis electric ultralight, on camera. He calls it a very big experiment, says he is not releasing plans for it, and credits his own airplane-building experience and aeronautical friends who checked the design.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.