BUILD A DRONE THAT CARRIES 119 LB
A father and son in Cape Town built a 13 kg carbon hexacopter that lifted 54 kg and won 750,000 dollars from DARPA—then nearly hit 4:1 before a motor overheated.
by Luke Maximo Bell
- difficulty
- ●●●●●
- time
- months
- license
- license not specified
- repo
- repo
●●●●● · months · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is not a weekend build—it is a competition-winning engineering project with zero public documentation. Luke Maximo Bell and his father designed a hexacopter around truss-principle carbon tubes strong enough to support an 80 kg person, tested motors on a homemade thrust stand, welded their own battery from Amprius cells, and iterated propeller designs to drop hover power from 8.1 kW to 6.9 kW. The result carried 54 kg on a 13 kg airframe and took second place in DARPA's Lift Challenge, winning 750,000 dollars. But there are no STLs, no Gerbers, no firmware, no BOM—just a detailed video walkthrough. The parts are professional-grade and expensive, the battery work involves spot-welding high-energy cells, and the final attempt at breaking 4:1 ended in an emergency landing when a motor overheated. This page exists because the project is extraordinary and the video is a masterclass in payload-optimised drone design, but you cannot follow a step-by-step guide to replicate it. If you are building a heavy-lift drone and need to understand motor selection, frame loading, and power budgeting, watch the video. If you want files to download and a parts list to order, this is not the project.
IN THE REPO
GOOD TO KNOW
- —No repository, CAD files, BOM, build instructions or firmware are publicly available.
- —The only source is Luke Maximo Bell's YouTube video detailing the build process and competition results.
- —Parts used are professional-grade (Amprius high-energy cells, custom carbon truss frame, high-power motors).
- —The drone was built for DARPA's Lift Challenge under strict rules: under 25 kg, lift 50+ kg over a set course.
- —Second place finish with a 3.64:1 ratio (119 lb / 54 kg payload on a 29 lb / 13 kg airframe) earned $750,000.
- —Built in partnership with a US company (MTech Operations), not as a solo hobbyist project.
Parts to buy
5 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
How I Won $750,000 With this Drone
Full build walkthrough by Luke Maximo Bell, covering design decisions, motor testing, battery assembly, and competition results. Primary source for all technical details.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the full YouTube build video (This is the only publicly available documentation. No files, BOM, or instructions exist elsewhere.)
- 2.Study hexacopter payload-to-weight optimisation principles(Luke chose six rotors for the best payload ratio. Understanding why matters before designing your own.)
- 3.Research DARPA Lift Challenge rules and results(The competition required drones under 25 kg to lift 50+ kg. MTech Operations (the team name) scored 3.64:1 for second place.)
KNOWN ISSUES
- There are no public files, no BOM, and no step-by-step instructions—this is a video case study, not a replicable build guide.
- The parts are professional-grade and expensive. Amprius cells, high-power motors, and custom carbon work are not hobbyist-budget items.
- Battery assembly involves spot-welding high-energy cells. A badly assembled pack is a fire hazard, and there is no published wiring diagram.
- The last attempt at breaking 4:1 ended in an emergency landing when a motor overheated—thermal management at this power level is hard.
- This was built in partnership with a US company (MTech Operations) and flown under competition rules on closed fields, not as a solo garage project.
- Even with the video, replicating the carbon truss frame, motor characterisation, and flight tuning will take months of iteration.
Are the CAD files or BOM available?
No. The only public documentation is the YouTube video. No repository, STLs, Gerbers, or parts list exists.
What is the actual cost to build this?
Unknown—no BOM was published. Amprius cells alone are expensive, and professional motors, ESCs, and carbon tubes push this into the $$$ band.
Can I fly this legally?
This was flown under DARPA competition rules on closed test fields. In most jurisdictions, a 13 kg drone requires certification, and heavy-lift commercial drones face strict airspace and operator licensing rules.
Why did the 4:1 attempt fail?
One motor overheated, forcing an emergency landing. Thermal management becomes critical at these power levels, and the video does not detail the exact failure mode.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
The drone hovered at 6.9 kW after propeller optimisation—down from 8.1 kW—and the battery was hand-welded from Amprius cells. If you were building a heavy-lift hexacopter, where would you start: motor selection, frame weight, or battery energy density?
Luke Maximo Bell
Luke and his father built the hexacopter in Cape Town as part of a team effort with MTech Operations for DARPA's Lift Challenge. The project combined structural engineering (truss-frame carbon design), motor characterisation, battery chemistry, and flight control tuning to achieve a 3.64:1 payload ratio and second place.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM13d ago
Practical notes from our verification: no repository, CAD files, or BOM exist—the YouTube video is the only source. The drone was built for a DARPA competition with strict rules (under 25 kg, lift 50+ kg), not as a garage project, and the team included a US company (MTech Operations). The 3.64:1 ratio earned second place and $750,000, but the last attempt at 4:1 ended in an emergency landing when a motor overheated. The parts are professional-grade (Amprius cells, custom carbon frame, high-power motors), so this is not a cheap or weekend build—it is a case study in payload-optimised drone engineering, not a step-by-step replicable project.