BUILD A ROBOT THAT 3D-SCANS OBJECTS
A Creality Ender 3 that sat in a closet for years became a motorized camera rig that photographs objects from every angle for 3D scanning.
by Ben Makes Everything
Built withArduino3D printing
- difficulty
- ●●●●○
- time
- a long weekend
- license
- license not specified
- repo
- repo 41 stars
●●●●○ · a long weekend · license not specified · 41 stars · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is for someone who already owns an old Ender 3, has a camera with a shutter port, writes Python, and wants to learn photogrammetry without buying a scanner. Ben kept the printer's steppers, rails and board and built a red camera arm on top. The extruder motor now drives a turntable up to 18 inches across, the camera moves forward, back, up and down and tilts up to 180 degrees, and Python scripts generate the G-code for every move. The printer board triggers the shutter through an Arduino and two relays. The same rig shoots product turntable videos. Photo sets go into Meshroom or 3DF Zephyr, which turn them into textured 3D models. The 3D models and a parts list are on GitHub, but the Python scripts and the shutter wiring are not published, so that part you write yourself from the video. Ben's first idea—a ring around the object—did not work, shiny objects still do not scan well, and the creator himself says it is far from perfect. If you do not already have the printer and the camera, the cost argument falls apart and you are better off with a structured photogrammetry tutorial that gives you the scripts.
IN THE REPO
GOOD TO KNOW
- —The GitHub repo has the 3D models (aluminum plates, camera ring) and a parts list with links, for an Ender 3 V2 with custom Marlin.
- —The Python scripts, G-code templates and shutter wiring are not published; the video shows them but you rebuild them yourself.
- —You need your own camera with a wired shutter port, plus an Arduino and two relays for the optional trigger.
- —The creator calls it 'far from perfect' at 21:41 and says shiny objects do not scan well.
- —No licence is stated in the repo.
Parts to buy
4 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Turning a 3D Printer into a Robotic Camera for Photogrammetry & Video22:01
Full build walkthrough with honest assessment at the end
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the full video and take notes on the mechanical changes, the Python workflow, and the shutter wiring (Timestamps 1:03, 15:11, 16:14 and 18:16 are the technical core)
- 2.Download the 3D models and parts list (3D models for the plates and camera ring, plus a parts list with links. Made for an Ender 3 V2.)
- 3.Write the G-code generator and test the Arduino shutter trigger on your camera(The Python G-code generator isn't published; you write your own from what the video shows at 16:14.)
Resources
Documentation, files and community threads for this build — we link straight to the original sources and never rehost the creator’s files.
KNOWN ISSUES
- The 3D models and parts list are published, but the Python scripts, G-code templates and wiring diagram are not. That part you rebuild from the video.
- If you do not already own an Ender 3 and a camera with a wired shutter port, the cost of buying them erases the advantage over a turntable rig with published files.
- Shiny objects do not scan well, and Ben calls the rig 'far from perfect' at 21:41. Photogrammetry is hard; this rig does not solve that.
- The first idea—a camera ring around the object—did not work. The turntable approach is what shipped, but it means you need desk space for an 18-inch platform.
- You need to know how to write Python that generates G-code and understand your printer's step calibration. The extruder steps change from 93 to 138.13 for the turntable.
- The BLTouch pin is repurposed to fire the shutter through an Arduino and two relays. If your printer does not have that port or you do not know how to wire it, you will need a different trigger method.
Can I use a different 3D printer?
Any printer with exposed stepper drivers, a spare GPIO pin for the shutter trigger, and enough build volume for the camera arm will work, but you will need to adapt the mechanical design and the G-code step values yourself.
What camera do I need?
Any camera with a wired shutter port. The video does not name a specific model. You need to know your camera's pinout to wire the relay.
Where are the Python scripts?
They are not published. You are writing your own G-code generator based on what you see in the video at 16:14.
Will this scan shiny objects?
No. Ben says shiny objects are problematic at 20:59, and photogrammetry in general struggles with reflective surfaces unless you add a scanning spray.
How big can the objects be?
The turntable goes up to 18 inches across, Weight is limited by what the extruder stepper can turn.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
The turntable goes up to 18 inches and the camera tilts up to 180 degrees, but Ben says shiny objects still do not scan well and the whole thing is far from perfect. What would you scan first to test it?
Ben Makes Everything
Ben is a YouTube maker who builds practical modifications and tools from existing hardware. This project reused an Ender 3 that had been sitting unused for years after he upgraded to a newer printer.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM14d ago
Practical notes from our verification: the 3D models (aluminum plates and the camera ring) and a parts list are on GitHub, but the Python scripts, G-code generator and shutter wiring are not published, so that part you rebuild from the 22-minute video. The creator is honest about what did not work—the original ring idea failed, shiny objects are still problematic, and he calls it far from perfect at the end—but the video is well-shot and the timestamps make it possible to follow. The single biggest decision is whether you already own an Ender 3 and a camera with a shutter port; if you are buying both, a structured photogrammetry rig with published files will save you the weekend you will spend writing Python.