BUILD A BOEING 737 SIMULATOR AT HOME
A Norwegian builder spent five years building a full 737-800 cockpit in a 12 square meter room, mostly from laser-cut aluminium.
by B738DIY
- difficulty
- ●●●●●
- time
- five years
- license
- license not specified
- repo
- repo
●●●●● · five years · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is a finished personal build, not a project you can follow. The builder made a full Boeing 737-800 cockpit in a 12 square meter room over five years, mostly from laser-cut aluminium, with three 65-inch TVs for a 200-degree view, tactile transducers for engine rumble, and later a two-axis motion platform with homemade linear actuators. It runs Microsoft Flight Simulator with ProSim 737 and a second PC for instruments and an instructor station. The walkthrough is extraordinary, but there are no plans, no CAD, no parts list, and no build log. He does not say what it cost, though commercial flight sims run five to fifteen million dollars and even a home version with three large TVs, custom metal panels, hundreds of switches, motion actuators, and software licenses will be expensive. A few gauges were still missing in the tour. If you want to build a home cockpit, this shows what is possible at the top end, but you will be designing it yourself or buying from specialist vendors — this is not a weekend project or even a weekend-plus project, and there is no starter kit. The single thing most likely to go wrong is underestimating the time, the metalwork skill, and the cost before you have anything flyable.
IN THE REPO
GOOD TO KNOW
- —There is no repository, no build guide, no CAD files, and no bill of materials.
- —The only source is a YouTube walkthrough of the finished cockpit.
- —The builder (B738DIY) says he designed and built almost everything himself except the seats and throttle quadrant, but he does not share those designs.
- —Commercial Flight Simulator software (Microsoft Flight Simulator, ProSim 737, SimTools V3) is required and not included.
- —Cost is not stated anywhere. Three 65-inch 4K TVs alone suggest thousands of dollars before any aluminium, actuators, switches, or licenses.
- —This is not a how-to project — it is documentation of a personal five-year build with no public path to replicate it.
Parts to buy
12 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
- Three 65-inch 4K TVsFind
- Laser-cut aluminium panels (custom designed)Find
- Hundreds of switches and indicatorsFind
- SeatsFind
- Throttle quadrantFind
- Tactile transducersFind
- Two linear actuators for motionFind
- Thanos AMC motion controllerFind
- Microsoft Flight SimulatorFind
- ProSim 737 add-onFind
- SimTools V3Find
- Two PCsFind
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Tour of my DIY 737 home cockpit
20 Nov 2023. Walkthrough of the finished cockpit. No build steps, no part numbers, no CAD shown.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the main walkthrough to see what a finished home cockpit looks like (This is not a tutorial — it is a tour of a completed five-year build.)
- 2.Research ProSim 737 and Microsoft Flight Simulator hardware integration(These are the software tools used. ProSim 737 is a commercial add-on specifically for hardware cockpits.)
- 3.Find suppliers for cockpit panels and switches, or plan to design and fabricate them yourself(The builder made almost everything except seats and throttle quadrant. There is no shared CAD.)
KNOWN ISSUES
- There are no build files, no CAD, no BOM, and no step-by-step guide. You are reverse-engineering this or designing your own.
- Cost is not stated, but three 65-inch 4K TVs, hundreds of switches, custom aluminium panels, motion actuators, and software licenses will add up fast.
- ProSim 737 is commercial software, not open source. Microsoft Flight Simulator also requires a license.
- The builder spent five years on this. Expecting to finish it in months is unrealistic unless you buy pre-made panels and skip the motion platform.
- A few gauges were still missing in the walkthrough — even after five years, it was not fully complete.
- The motion platform only tilts in two axes (pitch and roll). Real airline simulators move in six.
Are there build files or CAD available?
No. The builder designed and fabricated almost everything himself but has not shared the designs.
What does it cost?
Not stated. Three 65-inch 4K TVs alone are thousands of dollars, before any metal panels, switches, actuators, or software.
Can I fly it without the motion platform?
Yes. The motion platform was added later. The core cockpit runs on Microsoft Flight Simulator and ProSim 737 without motion.
Is this a certified simulator?
No. It is a personal build using consumer flight sim software, not an FAA-certified training device.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
The builder spent five years on this and still had a few gauges missing in the walkthrough. If you were starting a home cockpit from scratch today, would you build it panel by panel like this, or buy pre-made sections and focus on integration?
B738DIY
A Norwegian builder who spent five years designing and building a full Boeing 737-800 cockpit in a 12 square meter room. Almost every panel and switch was custom-made, mostly from laser-cut aluminium.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM12d ago
Practical notes from our verification: there is no repository, no shared CAD, and no public build log — the only documentation is the YouTube walkthrough of the finished cockpit. The builder says it took five years, mostly laser-cut aluminium, and he designed almost everything except the seats and throttle quadrant, but none of those designs are available. The motion platform came later (May 2024) and uses two homemade linear actuators with Thanos AMC and SimTools V3. Cost is not mentioned anywhere, but three 65-inch 4K TVs, custom metalwork, hundreds of switches, and commercial flight sim software (ProSim 737, Microsoft Flight Simulator) suggest this is a high four-figure or five-figure build minimum. This is not a project you follow — it is proof of what one person can build with enough time and metalworking skill.