TURN A PLAYSTATION 2 INTO A FOLDING HANDHELD

LCLDIY cut a real PlayStation 2 motherboard down and built it into a handheld with a foldable screen that folds up into a tiny PS2.

by LCLDIY

Open-hardwareDisplays

Built with3D printing

difficulty
●●●●●
time
weeks, not a weekend
license
license not specified
repo
repo FINISHED
1
Jump to section

COMPAREE VERDICT

This is a show build, not a project you follow along with. LCLDIY cut a real PlayStation 2 motherboard down to handheld size, added cooling and a virtual drive, then built a foldable 4:3 screen into a 3D-printed case with custom hinges and a PlayStation-style button PCB. Folded, it looks like a tiny PS2. Unfolded, it plays actual PS2 games. It can also output to a TV with a wireless controller. The Hackaday page has the STL files and the PCB files, but there is no parts list, no firmware, no guide to cutting the motherboard, and no source for the foldable screen. The single biggest problem is that Sony never published PS2 schematics, so you would be working from the same unofficial 7-series documents LCLDIY found — and one wrong cut ends the project. Battery life is not mentioned. This is a build to admire and learn from, not one to replicate unless you have serious board-level experience and are comfortable with dead ends.

GOOD TO KNOW

  • —STL files and PCB files are on Hackaday (hackaday.io/project/207163).
  • —No bill of materials, no firmware repository, no step-by-step assembly guide.
  • —Sony does not publish PS2 schematics — LCLDIY worked from unofficial 7-series documents he found.
  • —The foldable screen, the hinges, and the cut motherboard are custom work with no off-the-shelf equivalent.
  • —This is a one-off build documented after the fact, not a kit or a reproducible project.
  • —No licence stated on the Hackaday page.

Parts to buy

5 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Donor PlayStation 2Find
  • 4:3 foldable screen (source not given)Find
  • Custom button PCB (files on Hackaday)from the repo files
  • Cooling hardwareFind
  • Battery and the passive parts for the cut motherboardFind

Can I build this?

PrintCase halves, hinge assemblies, and button housing from the STL files on Hackaday
Buya donor PlayStation 2, a 4:3 foldable screen (source not given), the custom button PCB (files on Hackaday), cooling hardware, battery and the passive parts for the cut motherboard
ToolsSoldering iron, hot air station, multimeter, 3D printer, PCB fabrication account, and ideally an oscilloscope for motherboard diagnostics
SkillsBoard-level electronics, SMD rework, 3D CAD if you need to adapt the case, and comfort working without schematics — this is not a beginner build
TimeWeeks. Cutting and validating the motherboard alone could take a weekend; integrating the screen, hinges, and controls is another. No assembly guide means you are reverse-engineering from the video.
Cost$$$. The PS2 donor board is cheap, but the foldable screen, PCB fabrication, and the cost of mistakes (a bad cut kills the motherboard) push this into expensive territory.
SafetyLithium battery and soldering near active components. The real risk is electrical — one short on the cut motherboard can release smoke or destroy the board. Work in a ventilated space and keep a fire extinguisher nearby.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

PlayStation 2 DUO

Build showcase with close-ups of the motherboard cut, the screen fold and gameplay. Not a step-by-step tutorial.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Download the STL and PCB files (The Hackaday project page has the 3D-printable case files and PCB designs, but no BOM or firmware.)
  2. 2.Watch the YouTube video (Shows the motherboard cutting, screen integration, and hinge mechanism in detail — this is your best reference for what goes where.)
  3. 3.Pick a donor PS2 board you have documentation for(LCLDIY worked from the 7 series documents, because those were the only ones he found. Other revisions have different layouts.)
  4. 4.Find or fabricate a 4:3 foldable screen(The video shows the screen bending, but the exact part is not named. This is the hardest component to source — no direct equivalent exists off-the-shelf.)

Resources

Documentation, files and community threads for this build — we link straight to the original sources and never rehost the creator’s files.

KNOWN ISSUES

  • The foldable screen is not identified by part number or supplier — if you cannot find one that matches the dimensions and fold radius, the entire case design will not work.
  • Sony does not publish PS2 schematics, so cutting the motherboard is reverse-engineering work. One mistake and the board is scrap.
  • There is no parts list for the cooling hardware, the virtual drive module, or the passive components that need to be relocated after the cut.
  • The hinge mechanism is custom and the STL files may not print reliably on every printer — expect fitting and sanding.
  • Battery capacity and runtime are not mentioned anywhere, so you are guessing at power requirements.
  • This is a finished build, not a work-in-progress with community support — if you get stuck, there is no forum or Discord to ask.

Can I buy this as a kit?

No. This is a one-off build. The files are online but you source every part yourself, including a donor PS2 and a foldable screen with no part number given.

How long does the battery last?

LCLDIY has not published battery capacity or runtime figures. You would need to measure power draw and size the battery yourself.

Do I need the exact same PlayStation 2 model?

LCLDIY says the only documents he could find were for the 7 series board. Other PS2 revisions have different board layouts, so a cut that works on one may not work on another.

Where do I get the foldable screen?

The video shows it bending but does not name the part. You will need to find a 4:3 foldable display that matches the case dimensions — this is the single hardest component to source.

Is there a build guide or assembly video?

No step-by-step guide. The YouTube video is a showcase with close-ups, not a tutorial. You are reverse-engineering from what you see.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

Sony sold 160 million PS2 consoles and never made a handheld — LCLDIY cut one down and folded it. The foldable screen has no part number and the motherboard has no schematic. Would you attempt this, or wait for someone to document the screen source first?

CompareeTEAM6d ago

There is no official parts list, and the foldable 4:3 screen, the part that makes the whole design work, is not identified anywhere. The video shows the motherboard cut and the hinge assembly, but it is a showcase, not a step-by-step guide, so you are learning by watching and pausing. Battery life is the big unknown: LCLDIY does not say how long it runs. If you have board-level skills and are comfortable sourcing mystery parts, the STL and PCB files give you a head start, but this is not a weekend build, and one bad motherboard cut ends it.

LCLDIY

LCLDIY builds custom electronics and posts them to YouTube. This PS2 handheld is a one-off project, not a product line. Contact is through WeChat (lcldiy) — no Instagram or public email listed.

Web

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.