TURN A TESLA MOTOR INTO A 350 HORSEPOWER ELECTRIC JET BOAT

Prop Department spent three years building a mini jet boat around a Tesla motor, with a hand-welded hull and liquid-cooled battery modules.

by Prop Department

WorkshopEnergy

difficulty
●●●●●
time
three years and several iterations
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

This is not a project you can build from a parts list on a weekend. It is a three-year fabrication story: a hull he welded himself, hand-made battery enclosures, liquid-cooled battery modules with an aftermarket BMS, and a custom-tuned Tesla Model S motor good for over 350 horsepower driving a pump-jet through a custom stub shaft with no transmission in between, run by an aftermarket controller board for the inverter. The first motor came from a Model 3 and made about 280 hp. The original setup had a couple of dead cells that cut all power, so two of the four modules were replaced. It charges through a J1772 port, with no fast charging. The creator is Prop Department, and the YouTube series (parts 1 and 2 have over 3 million views combined) shows the process. CAD files are on his Patreon, but there is no BOM and no step-by-step guide. You would be working from video, fabricating everything yourself, and handling high-voltage EV components that can kill you if you get the insulation or cooling wrong. A later episode shows the motor blowing up on the river. A commercial electric personal watercraft like the Taiga Orca was listed at 15,000 to 24,000 dollars, with no welding needed. This build is for someone who already knows metal fabrication, high-voltage DC and lithium battery packs, has a full metal shop, and accepts that the first iteration will probably not work.

GOOD TO KNOW

  • —This is a YouTube build series, not a repository with files or instructions.
  • —CAD files are on the creator's Patreon (paid access). There is no free download, no wiring diagram and no parts list.
  • —The boat is hand-welded and custom-fabricated; you would be reverse-engineering every detail from video footage.
  • —A later episode shows the motor blowing up on the river.
  • —The series is sponsored by Tubi, and the description carries SendCutSend affiliate links.
  • —No licence is stated.

Parts to buy

9 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Tesla drive motorFind
  • Tesla battery modulesFind
  • Aftermarket BMSFind
  • Aftermarket controller board for the inverterFind
  • Pump-jetFind
  • Custom stub shaftFind
  • J1772 charge portFind
  • Liquid cooling parts for the modulesFind
  • Metal for the hull and battery enclosuresFind

Can I build this?

PrintNo printed parts are mentioned in the sources.
BuyA Tesla drive motor (the build used a Model 3 unit, then a custom-tuned Model S unit), Tesla battery modules, an aftermarket BMS, an aftermarket controller board for the inverter, a pump-jet, a custom stub shaft, a J1772 charge port, liquid cooling parts for the modules, and metal for the hull and battery enclosures.
ToolsA welder and metal fabrication tools for the hull and battery enclosures, a way to make the custom stub shaft, EV-rated electrical tools and insulated protective gear for the high-voltage work, and plumbing for the liquid-cooled battery modules.
SkillsMetal welding and hull fabrication, high-voltage DC electrical work, lithium battery module assembly and liquid cooling, inverter controller setup, jet drive integration, and troubleshooting custom EV systems.
TimeThree years and several iterations for the creator, and there were still small things to finish.
CostThe sources give no total; the creator only says it cost a lot to build. You need a Tesla motor, battery modules, an aftermarket BMS and inverter controller board, a pump-jet, a custom stub shaft and the hull material. For comparison, the Taiga Orca electric personal watercraft was listed at 15,000 to 24,000 USD (2020).
SafetyHigh-voltage EV components that can deliver fatal current; lithium battery fire risk if cells, cooling or the BMS fail; drowning risk if the boat floods or the battery enclosure is not watertight; and the motor blew up on the river in a later episode. Learn EV safety practice, use proper protective gear, and never work on the high-voltage system while it is energized.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

Part 1

He welds the hull himself and modifies the motor and batteries.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the YouTube series(Part 1 shows the hull welding and initial setup; Part 2 shows the motor upgrade and battery troubleshooting. There are no written build instructions.)
  2. 2.Decide if you can weld the hull(The hull and battery enclosures are hand-made, and he welded the hull himself. If you cannot weld watertight seams, plan to hire that work out.)
  3. 3.Source a Tesla drive unit and battery modules(The first motor was a Model 3 unit (about 280 hp), later upgraded to a custom-tuned Model S motor (over 350 hp). You also need working battery modules and an aftermarket BMS, as used in the build.)
  4. 4.Design the stub shaft and motor mount(The custom shaft connects the motor output directly to the jet pump with no transmission. This is machine work, not off-the-shelf hardware.)

KNOWN ISSUES

  • There is no repository, BOM or step-by-step guide. CAD files are on the creator's Patreon (paid access); the rest you work out from the videos.
  • A couple of dead cells cut all power output, and two of the four battery modules had to be replaced. Test every module before you build it in.
  • The motor blew up on the river in a later episode. Catastrophic failure is not a hypothetical risk; it happened to the creator on the water.
  • This is high-voltage EV work: a Tesla motor, inverter and battery modules. A single mistake with the BMS, cooling or insulation can kill you or start a lithium battery fire.
  • The hull is welded by hand. If your welds are not watertight, the boat will sink, and if the battery enclosure floods, you have a submerged high-voltage short circuit.

Is there a parts list or a bill of materials?

No. This is a YouTube build series with no BOM or written instructions. The creator offers CAD files on his Patreon (paid access); everything else you identify from the videos and source yourself.

Can I use a different motor or a smaller battery pack?

The build itself changed motors: it started with a Tesla Model 3 motor (about 280 hp) and was upgraded to a custom-tuned Model S motor (over 350 hp), with a custom stub shaft on the motor output and an aftermarket controller board for the inverter. The videos do not cover other motors or a smaller pack.

How fast does it go?

The sources do not give a top speed. A later episode shows the motor blowing up on the river.

Do I need a boat licence or registration?

It depends on where you live. The videos do not cover registration or licensing, so check your local boating rules before you put a motorized boat on the water.

What went wrong in the original build?

A couple of dead cells cut all power output, so two of the four battery modules were replaced with fresh ones. In a later episode the motor blew up on the river.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

Three years and two motors in, it finally ran on a lake, then the motor blew up on the river. Would you build an electric jet boat around a Tesla drive unit, or buy a commercial one like the Taiga Orca?

CompareeTEAM29d ago

Practical notes from our verification: this is a YouTube series, not a repository. CAD files are on the creator's Patreon (paid access), but there is no BOM, no wiring diagram and no step-by-step guide. He welded the hull himself, built liquid-cooled battery modules, and swapped the Model 3 motor for a tuned Model S motor before the first successful lake test. A later episode shows the motor blowing up on the river, so failure is documented, not theoretical. If you cannot weld, work safely with high-voltage DC and troubleshoot custom EV systems, this is not a weekend project: it took the creator three years.

Prop Department

Prop Department is the YouTube channel behind what it calls the world's first Tesla powered mini jet boat. The build took three years and several iterations: he welded the hull himself, started with a Tesla Model 3 motor and upgraded to a custom-tuned Model S motor. Parts 1 and 2 of the series have over 3 million views combined.

Web

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.