TURN OLD PHONES AND COMPUTERS INTO PURE GOLD

GopherDope dissolved 50 kg of old RAM, phones and motherboards with aqua regia and pulled out 13 grams of pure gold.

by GopherDope

Science

difficulty
●●●●●
time
many hours over several days
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

GopherDope's video demonstrates industrial-scale gold recovery chemistry applied to consumer electronics waste. The principle is real: older electronics used far more gold than modern ones, and the Pentium Pro genuinely holds the record for gold content in a single CPU. They processed 4.6 kg of RAM, 10 kg of boards, 2 kg of chips, two boxes of old phones and 30 kg of motherboards, and recovered more than 13 grams of gold worth about 1,520 dollars at the time. The chemistry works — nitric acid dissolves the other metals, aqua regia dissolves the gold, and the gold precipitates back out and can be melted. The one thing most likely to go wrong is that you attempt this without proper ventilation, acid-resistant equipment, waste disposal protocols, or protective gear, and you end up with ruined clothes, ruined furniture, acid burns, or toxic fume exposure. The video is clear about the downsides: it took many hours, strong acids, toxic fumes, and the acid burned holes in their clothes and shoes. This is not a home project. It is chemistry you watch, not chemistry you try.

GOOD TO KNOW

  • —This is a chemistry demonstration, not a build project.
  • —No repository, no files, no bill of materials.
  • —The video shows the process but does not provide safety protocols, waste disposal procedures, or acid handling specifications.
  • —Strong acids (nitric acid, hydrochloric acid) and toxic fumes are involved.
  • —No licence applies because this is a YouTube demonstration, not a released design.
  • —This is not a weekend project and not safe to attempt at home.

Parts to buy

6 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • 50 kg of old electronics (RAM, CPUs, motherboards, phones)Find
  • Nitric acidFind
  • Hydrochloric acidFind
  • Acid-resistant glasswareFind
  • Fume hood or outdoor ventilationFind
  • Protective gearFind

Can I build this?

Printnothing required
Buy50 kg of old electronics (RAM, CPUs, motherboards, phones), nitric acid, hydrochloric acid, acid-resistant glassware, fume hood or outdoor ventilation, protective gear
Toolsfume hood or outdoor ventilation, acid-resistant containers, torch for melting, protective clothing and gloves
Skillschemistry knowledge, acid handling experience, waste disposal protocols, understanding of toxic fume hazards
Timemany hours over several days
Cost$$$ — dominated by acid-resistant equipment, ventilation, protective gear, and safe waste disposal
SafetyStrong acids (nitric and hydrochloric) cause severe burns and toxic fumes. Aqua regia is highly corrosive. This process destroyed the creator's clothes, table and shoes. Do not attempt without proper ventilation, acid-resistant equipment, protective gear and knowledge of chemical waste disposal.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

Creator’s build video

Full demonstration of the process from collection to melting. Shows yields per component type and total value.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Do not start(This is a chemistry demonstration, not a safe home project. Watch the video to understand the process, but do not attempt it without industrial chemistry training, proper ventilation, acid-resistant equipment and waste disposal protocols.)

KNOWN ISSUES

  • Attempting this at home without a fume hood or outdoor ventilation leads to toxic fume exposure.
  • Nitric acid and hydrochloric acid cause severe chemical burns. The video shows the acid burned holes in their clothes and shoes.
  • Aqua regia is highly corrosive and reactive. Improper handling destroys equipment and causes injury.
  • Old electronics are not free — you need about 50 kg of the right vintage to get a meaningful yield.
  • Waste disposal is not shown in the video. Acid waste cannot go down the drain and requires proper chemical waste handling.
  • The 13 grams took many hours over several days. This is not a quick process.

Is this legal?

Owning old electronics and recovering gold from them is legal in most places, but handling strong acids and disposing of chemical waste is regulated. Check local laws on acid purchase, storage and waste disposal before considering this.

Can I do this at home?

No. The video shows the acid burned holes in their clothes, ruined their table and shoes, and produced toxic fumes. This requires industrial ventilation, acid-resistant equipment, protective gear and knowledge of chemical waste disposal.

How much is 13 grams of gold worth?

About 1,520 dollars at the spot price when the video was filmed. Gold prices change daily.

Where do I get old electronics with gold?

The video used old RAM, CPUs (especially ceramic Pentium Pros), motherboards, TV and VCR boards, and old phones like the Nokia 3310. Older is better — modern electronics use far less gold.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

They recovered 13 grams from 50 kg of scrap, and older ceramic CPUs like the Pentium Pro hold far more gold than anything made today. If you had access to a pile of e-waste, what would you go after first?

CompareeTEAM25d ago

Practical notes from our verification: this is the only video we found from this creator on gold recovery, there is no GitHub repository or build guide, and the video does not cover safety protocols, waste disposal or ventilation specifications. The chemistry is real and the yields match known figures for older electronics, but the video makes it clear this is not safe to attempt at home — the acid burned holes in their clothes and ruined their table. Watch it to understand the process, not to replicate it.

GopherDope

GopherDope is a YouTube creator who demonstrates chemistry and materials recovery processes. This video documents the multi-day process of recovering gold from 50 kg of old electronics.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.