BUILD THE 1984 APPLE TABLET THAT WAS NEVER MADE
A working replica of the flat touch tablet Apple's designer drew in 1984 and never built.
by Kevin Noki
Built withRaspberry Pi
- difficulty
- ●●●●●
- time
- several weekends
- license
- license not specified
- repo
- repo FINISHED
●●●●● · several weekends · license not specified · repo FINISHED
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is not a project you can build this weekend, or even this month. Kevin Noki made a working replica of Hartmut Esslinger's 1984 FlatMac concept by asking the original designer for dimensions, then designing and printing every part himself. The result is extraordinary — a beige touch tablet running Mac System 7 from real floppy disks, with a custom keyboard PCB and a Raspberry Pi 4 inside. But he has not published the files, the schematics, or a guide. You would be starting from photographs and guesswork. If you are an experienced maker who has designed enclosures and PCBs before, and you want to spend several weekends reverse-engineering someone else's tribute build, this is inspiring reference material. If you want a project you can actually follow, this is not it. The single thing most likely to go wrong is realising halfway through that you are designing your own tablet from scratch, not following instructions.
IN THE REPO
GOOD TO KNOW
- —No repository exists. Kevin Noki has not published CAD files, schematics, firmware, or a build guide.
- —You would need to reverse-engineer the design from video timestamps and screenshots.
- —The keyboard PCB was custom-designed with a diode per key (1N4148W), but no Gerber files are available.
- —The original dimensions came directly from designer Hartmut Esslinger, but those are not public.
- —This is a tribute build, not an open-source project you can replicate without significant engineering work.
Parts to buy
8 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Creator’s build video48:00
48-minute build video with no step-by-step guide. Timestamps show key stages but not replicable instructions.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the full build video (This is reference material, not a tutorial. Take screenshots of dimensions and construction details.)
- 2.Design or find a large enclosure that fits a touch display and Raspberry Pi 4(Kevin's case was printed in sections on a 400×400×400mm bed. You will need to model your own or adapt another design.)
- 3.Design a keyboard PCB or use a commercial mechanical keyboard PCB(Kevin's design used 1N4148W diodes under every key. If you have never designed a keyboard matrix, start with an existing open-source keyboard project.)
- 4.Set up Mini vMac on Raspberry Pi 4(The video shows Mac System 7 installed from floppy disk images. Mini vMac documentation covers this.)
KNOWN ISSUES
- No files exist. You are not following a guide, you are reverse-engineering a tribute build from a video.
- The original dimensions came from Hartmut Esslinger and are not public. You would need to scale from photographs or contact the designer yourself.
- A 400×400×400mm 3D printer is larger than most home machines. The case will not fit on a standard Ender 3 or Prusa bed.
- Custom keyboard PCBs require PCB design software (KiCad, EasyEDA) and either commercial fabrication or a home etching setup. If you have never done this, it is a project on its own.
- The touch display is described as an 'iPad touch display' in one source but the exact model is not named. Finding a compatible display that fits the case dimensions will take research.
- Power bank runtime is about an hour. This is not a portable work machine, it is a demonstration piece.
Are the CAD files available?
No. Kevin Noki has not published them.
Can I buy a kit or a finished replica?
No. This was a one-off tribute build, not a product.
What 3D printer do I need?
One with at least a 400×400×400mm build volume, or you will need to split the case into smaller sections and join them.
Is this real Apple hardware?
No. It is a replica of a 1984 concept design. The internals are a Raspberry Pi 4 and a modern touch display running a Mac emulator.
How long does the battery last?
About an hour on a power bank, according to the video.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
Kevin got the dimensions directly from Hartmut Esslinger, the designer who drew the FlatMac in 1984. If you were building this from scratch without those numbers, where would you even start?
Kevin Noki
Kevin Noki is a maker and electronics enthusiast who builds working replicas of historical computing concepts. He contacted the original designer, Hartmut Esslinger, to get dimensions for the 1984 FlatMac concept and then designed and built a working version. He has not published the files or a guide.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM10d ago
Practical notes from our verification: this project has no repository, no published files, and no written guide. Kevin designed the keyboard PCB himself (1N4148W diodes under every key) and printed the case in sections on a 400×400×400mm printer, then sanded and painted it. The touch display is described in one external source as an 'iPad touch display', but the exact model is not named in the video or payload. If you want to build this, you are starting from video screenshots and your own CAD skills, not from a parts list. It is an inspiring piece of work, but not a project you can follow.