BUILD A LASER THAT MOWS YOUR LAWN
A 40 watt CNC cutting laser, mounted on a tracked robot, burns grass flat to the ground.
by Daniel Riley (rctestflight)
Built withArduino
- difficulty
- ●●●●●
- time
- weeks of testing
- license
- license not specified
- repo
- repo
●●●●● · weeks of testing · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is not a project you can build from instructions — it is a demonstration that lasers can cut grass, filmed by rctestflight in 2022. The video shows a 40 watt cutting laser (the kind sold for CNC machines) aimed at grass, later mounted on a tracked robot. It works: after several days the lawn was flat, including thick weeds and moss. The obvious problem is that there is no repository, no build guide, no parts list, and no code. You would be starting from a blank page with a video for reference. The second problem is safety: this is 8,000 times more powerful than a green laser pointer, a direct hit to the eye for a nanosecond would blind you for life, and even stray reflections are dangerous. The video shows an accelerometer that shuts the laser off if the rig tips over, but you would have to design and test that yourself. The third problem is that it only avoided starting a fire because it was a rainy Pacific Northwest spring. If you have the skill to design a tracked robot, write safe firmware, and source industrial laser modules, this video will show you it can be done. If you are looking for plans to follow, this is not it.
IN THE REPO
GOOD TO KNOW
- —This is a demonstration project, not a build guide.
- —No repository, no STL files, no circuit diagrams, no code.
- —The video shows what was built but not how to build it.
- —You would need to source a 40 W CNC laser module, design mounts, write safety firmware, and solve the robot platform yourself.
- —No licence information because there are no files to license.
- —The only documentation is the YouTube video.
Parts to buy
7 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Laser lawn mower demonstration
The only documentation for this project. Shows the laser cutting grass and mounted on a tracked robot, but does not provide build instructions, parts lists, or code.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the video to see what was built (This is a demonstration, not a tutorial — no build files exist.)
- 2.Source a 40 W CNC laser module(Only consider this with real laser safety training and gear. He says to always wear laser glasses and, better yet, not to try this at home or anywhere. The video does not name the laser model.)
- 3.Design or buy a tracked robot chassis(He used his own rover kit, slowed down with VESC motor drives and an extra gearbox stage (17:1 to 47:1). The laser rides on a slider made of 2020 aluminum extrusion, and an Arduino drives the rover forward a little after every pass. You will need to design the mounts and integration yourself.)
- 4.Write firmware for a safety cutoff(The video mentions an accelerometer that shuts the laser off if the rig tips over. You must design and test this yourself — no code is provided.)
KNOWN ISSUES
- No build guide, no repository, no code, no STL files — you are starting from scratch with only a video for reference.
- Short range: the 40 W laser's focal point is only about 30 mm away. At longer distance the beam diverges and loses cutting power, which is why he used an old camera lens.
- Underestimating the danger: this is about 8,000 times a laser pointer, and one direct hit to the eye means permanent blindness. He wore laser glasses, aimed into grass with a hill behind it and used a tip-over cutoff, and still says not to try this at home or anywhere.
- Fire risk: the grass did not catch fire in the video only because it was rainy. In dry conditions this is a serious fire hazard.
- Speed: the video shows it is very slow. After several days the lawn was flat, but this is not a practical replacement for a mower unless you have infinite patience.
- Thick weeds: the video also shows the laser struggled with thick horsetail weeds, so it will not cut everything.
Is there a GitHub repository or build guide?
No. This is a demonstration project from 2022. The only documentation is the YouTube video.
What laser module do I need?
The first version uses a 40 watt cutting laser designed for CNC machines; the video does not name the model. Its focal point is only about 30 mm away, so he shone it through an old camera lens to get a narrower beam. He also tried an array of 24 small laser diodes mounted on a StratusLEDs module.
How dangerous is this?
Extremely. The 40 W laser is about 8,000 times more powerful than a 5 milliwatt green laser pointer. A direct hit to the eye, even for a nanosecond, would blind you for life, and stray reflections off the lens can blind you too. He says to always wear laser glasses and, better yet, not to try this at home or anywhere. He aimed it into grass with a slight hill behind it and used an accelerometer that switched the laser off if it tipped over.
Will it start a fire?
In the video it did not, because it was spring in the rainy Pacific Northwest; he says you could not start a fire in that grass if you tried. Do not assume dry grass elsewhere behaves the same.
How long does it take to mow a lawn?
Very long. The lawn was flat after several days, and the rover version mostly drove at about 2 meters per day. Cut clippings also fall into the beam and slow it down.
Can I buy one?
No. This is a one-off demonstration. Commercial farm laser weeders, like the Carbon Robotics LaserWeeder, are reported at around 1.2 million dollars.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
The video shows it took several days to flatten the lawn, and it struggled with thick horsetail weeds — but it worked on moss and cut right down to the ground. Would you trust a laser in your yard, or is this a brilliant experiment best left on YouTube?
Daniel Riley (rctestflight)
Daniel Riley runs the rctestflight YouTube channel. He had already tried mowing with drone motors and X-Acto knives on an RC car, so in 2022 he tried cutting grass with lasers instead.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM27d ago
Practical notes from our verification: there is no repository, no STL files, no code, and no build guide. The only documentation is the YouTube video from 2022. The video shows the laser works, but you would be designing the entire build yourself. The biggest trap is underestimating the danger: this is 8,000 times a laser pointer, and a direct hit to the eye for a nanosecond causes permanent blindness. The accelerometer safety cutoff is mentioned in the video but not documented, so you would have to design and test that yourself. The second biggest trap is fire risk: the grass did not catch fire in the video only because it was a rainy Pacific Northwest spring. In dry conditions this is a serious hazard.