TURN A 256GB IPHONE 17 PRO MAX INTO A 2TB ONE

Apple charges 800 dollars more for the 2TB iPhone 17 Pro Max. DirectorFeng melted off the 256GB memory chip and soldered on a 2TB one.

by DirectorFeng

Workshop

difficulty
●●●●●
time
Not stated by the creator
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

This is professional board-level repair, not a weekend project. DirectorFeng takes the logic board out of a 256GB iPhone 17 Pro Max, melts the original memory chip off with hot air, cleans every pad under a microscope, puts fresh solder balls on a 2TB chip through a stencil and solders it on. After reassembly an air tightness test shows the seal restored, iOS is flashed from a Mac in DFU mode, and the phone boots with 2TB. Apple sells the 256GB model for 1,199 dollars and the 2TB model for 1,999 dollars. The video has no narration and is not a tutorial: it shows the work, not the settings. The 2TB chip is shown but not sourced or priced. The phone is wiped and restored, the warranty is gone, and one mistake can kill a 1,199-dollar phone. If you have never done BGA rework, this is not the place to start.

GOOD TO KNOW

  • —This is a demonstration video, not a build guide with step-by-step instructions or a parts list.
  • —The source is a YouTube repair channel (DirectorFeng) showing professional microsoldering work on commercial repair equipment.
  • —No repository, no downloadable files, no written documentation — only the video walkthrough exists.
  • —The 2TB NAND chip itself is not linked or sourced in the video.
  • —This voids the warranty, wipes the phone completely, and one mistake can kill a $1,199 phone.
  • —No licence applies — this is repair work on consumer hardware, not an open-source project.

Can I build this?

Printnothing required
BuyA 2TB memory chip compatible with the iPhone 17 Pro Max (not sourced in the video) and BGA reballing supplies: a stencil for the chip and solder.
ToolsEquipment shown in the video: hot air rework station, board preheater, microscope, tweezers, solder wick, reballing stencil, a fixture for opening the phone, an air tightness tester, and a Mac to flash iOS in DFU mode.
Skillsprofessional microsoldering — BGA chip removal, pad cleaning under magnification, reballing, and reflow soldering. Prior experience with board-level repair is mandatory.
TimeNot stated by the creator. The edited video runs about 33 minutes.
Cost$$$. The 2TB chip price is not stated in the video. The phone itself ($1,199 for the 256GB model) is at risk, plus professional rework equipment if you do not already own it.
SafetyThe phone has a lithium-ion battery inside, and the work uses hot air on the logic board. The main risk is destroying a $1,199 phone; the warranty is void either way.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

iPhone 17 Pro Max 256GB to 2TB storage upgrade33:17

Full professional microsoldering walkthrough by DirectorFeng, a phone repair channel from China.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the full video to understand the process and assess whether you have the tools and skills (This is not a beginner project. If you have not done BGA rework before, this is not the place to start.)
  2. 2.Source a 2TB NAND chip compatible with the iPhone 17 Pro Max(The video does not link the chip. You will need to identify the correct part number and find a supplier.)
  3. 3.Open the phone and take out the logic board(The video shows the phone opened in a holding fixture and the board taken out, but it is not a disassembly guide.)
  4. 4.Desolder the original 256GB NAND chip with hot air, clean the pads under a microscope, reball the new chip, and solder it back on(This is the core of the project and requires professional-level microsoldering skill. One mistake can kill the board.)
  5. 5.Reassemble the phone, test the waterproof seal, connect to a Mac, and restore iOS(The phone will be completely wiped. You will need to set it up as new or restore from a backup.)

KNOWN ISSUES

  • The video does not say where the 2TB chip came from or what it cost. You would have to find a compatible chip yourself.
  • One mistake during chip removal, pad cleaning or soldering can kill the logic board, and with it a $1,199 phone.
  • Opening the phone and swapping a soldered chip voids the warranty.
  • The phone is completely wiped during the iOS restore. Back up everything before starting — there is no way to preserve data through this process.
  • Microsoldering requires a stereo microscope, a quality hot air station, and steady hands. If you do not already own this equipment and have used it on other BGA repairs, do not start with a $1,199 phone.
  • The video has no narration, only short on-screen subtitles. It shows the process but does not give settings, so you are expected to already know BGA rework.

Can I do this without a hot air station?

Not with the method shown. DirectorFeng removes and installs the memory chip with hot air on professional board repair equipment, then reballs the new chip through a stencil.

Will the phone still be waterproof after reassembly?

In this video, yes. DirectorFeng runs an air tightness test after the upgrade and the seal is shown as restored. That is one professional repair, not a guarantee for your own attempt.

Where do I buy the 2TB chip?

The video does not say where the 2TB chip came from or what it cost. It only shows that the chip arrived.

Will Apple know I did this?

The video does not cover this. Opening the phone and swapping a soldered chip voids the warranty.

Can I keep my data?

No. The phone is wiped and restored from scratch during the iOS flashing step. Back up everything before starting.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

Apple charges $800 more for the 2TB model, and the swap here is one memory chip on the logic board. Have you done BGA rework on anything this small before?

CompareeTEAM20d ago

Practical notes from our verification: this is a demonstration of professional microsoldering, not a tutorial with a parts list or sourcing links. The 2TB chip is shown arriving but its supplier and price are never given. The video runs about 33 minutes with no narration, just close-up work and short subtitles, so it shows what happens but not the settings behind it. If you have done BGA rework before, the steps will look familiar. If you have not, this is not the place to learn: the phone is wiped, the warranty is gone, and one mistake can kill a $1,199 phone. The surprise at the end: the air tightness test after reassembly shows the seal restored.

DirectorFeng

DirectorFeng is a phone repair channel from China. Its videos show board-level repair work filmed close up, with no narration, only hands at work and short on-screen subtitles.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.