BUILD YOUR OWN SPOT-STYLE ROBOT DOG

A rope-driven robot dog that walks, climbs a ramp and jumps — Aaed Musa's team built CARA 2.0 for about 1,450 dollars.

by Aaed Musa

Robotics3D printing

Built withTeensy3D printing

difficulty
●●●●●
time
Not stated by the creator — the five-person team built it over one three-month semester
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

CARA 2.0 is a serious robotics build: capstan actuators driven by rope instead of gears, a 3D-printed frame, an RC remote, a Teensy 4.1 microcontroller, a 9-axis IMU and a 24 V battery. Each actuator is a 9.6:1 capstan drive rated at 12 Nm of peak torque and cost about 80 dollars to make. The robot walks at 1.8 feet per second, climbs a ramp, jumps 4.5 inches and carries a 15 pound load, for about 1,450 dollars. That missed the team's 1,000 dollar target, but it is more than 50 percent cheaper and about 13 pounds lighter than CARA 1.0. The catch: the bill of materials is free, but the 50-page build guide, the CAD and the code are on Patreon. The video explains the design decisions and the problems the team hit — cheap motor controllers, hand-rewound drone motors, legs that made the robot pull to one side — but it is not a step-by-step tutorial. It is RC-controlled with no cameras, LiDAR or autonomy, so you are building a capable walking platform, not a Spot clone.

GOOD TO KNOW

  • —Bill of materials is free at aaedmusa.com/projects/cara2
  • —Full build guide, CAD files and code are Patreon-only
  • —The YouTube video explains the design and shows walking, ramp, jump and load-carrying tests; the 50-page step-by-step build guide is on Patreon
  • —Actuator: 9.6:1 capstan drive, 12 Nm peak torque, about 80 dollars each (5:19)
  • —No autonomy or camera integration — RC controller only

Parts to buy

6 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Video names TYI 5008 drone motors (18 dollars each)Find
  • MKS XDrive Mini FOC controllers (41 dollars)Find
  • DM20 ropeFind
  • Teensy 4.1Find
  • 9-axis IMUFind
  • 24 V battery and an RC remote and receiverFind

Can I build this?

PrintThe frame and most of the body are 3D printed — print time and filament amount not stated
BuyFull parts list in the free BOM at aaedmusa.com/projects/cara2. The video names TYI 5008 drone motors (18 dollars each), MKS XDrive Mini FOC controllers (41 dollars), DM20 rope, a Teensy 4.1, a 9-axis IMU, a 24 V battery and an RC remote and receiver.
Tools3D printer; the motors were rewound by hand with copper wire. Other tools are not listed in the video.
SkillsHigh — 3D printing, mechanical assembly, rewinding motors, FOC motor control and programming (inverse kinematics, gait code). This is not a first robot.
TimeNot stated by the creator — the five-person team built it over one three-month semester
Cost$$ — about 1,450 dollars according to the team, with the actuators as the main cost driver (about 80 dollars each). Build guide, CAD and code are a separate Patreon purchase.
Safety24 V battery and joints with up to 12 Nm of peak torque. On startup every joint drives to its physical limit to home itself, so keep fingers clear of the legs.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

CARA 2.0 robot dog build and demonstration22:11

22-minute video covering the capstan actuator, leg and frame design, the problems the team hit, and walking, ramp, jump and load-carrying tests. Not a step-by-step build tutorial.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the YouTube video to understand the capstan actuator concept and see the robot in action (Timestamps: actuator at 5:19, cost breakdown at 19:21, specs at 19:41)
  2. 2.Look through the free bill of materials (Free on Aaed Musa's website, which also covers technical details and calculations from the build)
  3. 3.Decide whether you need the build guide, CAD and code(The 50-page build guide, CAD and code are on Patreon — builder tier, or buy the project files in the Patreon shop)

KNOWN ISSUES

  • The BOM is free but the CAD and code are not — many builders assume 'open' means everything is public, and it does not here.
  • This is a walking platform, not a Spot replacement — no autonomy, no cameras, no LiDAR, just an RC controller. Reinforcement learning and perception are on the creator's own list of things still to improve.
  • The cheap FOC motor controllers were not always reliable — the team had to work through many issues and try a lot of firmware before the legs moved properly.
  • The drone motors are built for speed, not torque, so the team rewound them by hand with as much copper wire as they could fit. That tripled the torque, but it is slow, tedious work.
  • About 1,450 dollars is the team's figure for the robot. The build guide, CAD and code are a separate Patreon purchase.
  • Making all four legs identical made the robot turn left when it should walk straight. No software patch fixed it; the team had to redesign the left/right and front/back legs to be symmetrical.

Is this actually cheaper than Boston Dynamics Spot?

Yes — Spot launched at 74,500 dollars, and CARA 2.0 cost about 1,450 dollars. But it is not a Spot equivalent: it has no cameras, no LiDAR and no autonomy, and it is driven with an RC controller.

Can I build this without the Patreon files?

The bill of materials is free at aaedmusa.com/projects/cara2. The 50-page build guide, the CAD and the code are only available through Aaed Musa's Patreon — the builder tier, or a one-time purchase of the project files in his Patreon shop. The video explains the design, but it is not a step-by-step tutorial.

What is a capstan actuator?

Instead of gears, a zero-stretch rope called DM20 is wrapped and anchored around two smooth drums. In CARA 2.0 this gives a 9.6:1 reduction with zero backlash, high transparency and low cost, and each actuator is rated at 12 Nm of peak torque.

How fast does it walk?

1.8 feet per second, and it can jump 4.5 inches and carry a 15 pound load.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

The team aimed for 1,000 dollars and landed at about 1,450, with each capstan actuator costing about 80 dollars. What would you cut to hit the original target — or is 1,450 already impressive for a walking robot dog?

CompareeTEAM16d ago

Practical notes from our verification: the bill of materials is free on the project site, but the 50-page build guide, the CAD and the code are on Patreon. The 22-minute YouTube video is a design walkthrough and demonstration, not a step-by-step tutorial — it explains the capstan actuator at 5:19 and shows the cost and weight comparison at 19:30, but it does not walk you through wiring or assembly. If you are comfortable working from a parts list and a concept video, this is a great robotics challenge. If you need detailed instructions before you start buying motors, get the build guide first or pick a different project.

Aaed Musa

Aaed Musa built CARA 2.0 as his senior design project in his last semester of engineering school, together with teammates Jack Heyman, Pranava Mudigonda, Megan Prange and Derek Babby. They surveyed robotics hobbyists, students and professionals, who asked for three things: a price around 1,000 dollars, a weight under 20 pounds and a durable design. His earlier CARA 1.0 cost around 3,000 dollars; CARA 2.0 cut that by more than half and the weight by about 13 pounds.

Web

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.