TURN A GLASS CUBE INTO A REAL 3D DISPLAY
A laser projector and 38,000 etched points inside a glass block turn into a true 3D display you can walk around—no spinning parts, no glasses.
- difficulty
- ●●●●●
- time
- a month-plus
- license
- license not specified
- repo
- repo FINISHED
●●●●● · a month-plus · license not specified · repo FINISHED
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
James built a genuine solid-state volumetric display: about 38,000 laser-etched points inside a glass block, aligned with precision stages to a laser scanning projector, and software that maps every voxel so the projector lights the right bubbles. The result is a floating 3D image you can walk around with no moving parts and no glasses. It plays Doom, it plays the old Acorn game Zarch. The problem is that this is a showcase, not a recipe. The glass block was custom etched—the video does not say where, how much, or how to commission one. The projector and stages are not specified. There is no BOM, no wiring diagram, no calibration procedure. Commercial volumetric displays like the Voxon VX2 cost about 6,800 dollars and use a different moving-screen technology; this approach is fascinating precisely because it is static, but 38,000 points is low resolution and the path to working hardware is almost entirely undocumented. If you already have access to precision optics and custom glass etching, the video is a starting point. If you are hoping for a weekend project or even a clear parts list, this is not it. The single thing most likely to go wrong is starting at all without a plan for sourcing the glass.
IN THE REPO
GOOD TO KNOW
- —No BOM, no CAD files, no assembly instructions.
- —The etched glass block itself was custom-made—there is no vendor, no spec sheet, no how-to for getting one made.
- —No detail on the laser scanning projector model or the optomechanical alignment stages.
- —This is a demonstration project, not a step-by-step build guide.
Parts to buy
3 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Solid State Volumetric Display
Primary demonstration video by Ancient (James Brown), Shows the display running 3D scenes, Zarch, and Doom.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the demonstration video (See the display in action and understand what the finished project does.)
- 2.Source or commission a laser-etched glass block(This is the hardest step. The video does not document a vendor or process. You need a 3D point cloud etched inside a glass block—about 38,000 points in a grid.)
- 3.Identify a laser scanning projector and precision stages(Models are not specified in the video. Alignment is critical.)
KNOWN ISSUES
- The glass block is custom-made and the video does not say where to get one, how much it costs, or how to specify the etch. This is the project-killer.
- No BOM means you are guessing the projector model, the stages, and every other component.
- 38,000 points sounds like a lot but it is low resolution for a volumetric display—expect chunky voxel art, not smooth images.
- Alignment between the projector and the glass is precision work; the video shows no calibration procedure.
- This is a demonstration project by someone with access to custom fabrication. Treating it as a build guide will waste weeks.
- Commercial volumetric displays (Voxon VX2 at about 6,800 dollars) use a different moving-screen approach—this static bubble method is novel but harder to replicate.
Can I buy the etched glass block?
Not from this project. James had his block custom made and does not name a supplier. Laser etching shops that make glass souvenir cubes can etch point clouds, but you would need to supply your own 3D point file.
What projector and stages do I need?
You need a laser scanning projector and optomechanical stages precise enough to align every point in the glass with the beam.
Is this the same technology as the Voxon VX2?
No. The Voxon VX2 and most commercial volumetric displays use a moving screen. This project uses a static etched glass block and a scanning laser—different approach, different challenges.
How long does it take to build?
Unknown. James does not say how long it took. Alignment and software setup are the hard part, and getting a custom etched block made depends on finding an etching shop.
Can I use this commercially?
The video does not state a licence, so ask the creator before using anything commercially.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
38,000 etched points, a laser scanning projector, and precision stages—and the hardest part is not the code, it is sourcing the glass block itself. If you had access to custom glass etching, what would you display first?
James Brown (Ancient)
James runs the Ancient YouTube channel and built this volumetric display as a demonstration of projection mapping onto a 3D point cloud etched in glass. The software is open source; the hardware path is not documented.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM9d ago
Practical notes from our verification: the YouTube video is the primary source and shows the display working beautifully, but there is no hardware BOM, no glass vendor, no projector model and no alignment guide. Hackaday and Hackster both covered it in December 2025 and confirm the basic facts (laser projector, optomechanical stages, plays Doom and Zarch), but neither article adds sourcing detail. This is a genuine technical achievement, but it is a demonstration, not a replicable build. The single biggest missing piece is a path to the etched glass itself.