TURN A SHEET OF GLASS INTO A SEE-THROUGH TV
A 32-inch pane of glass, a short-throw projector underneath, and a picture that floats in mid-air for about 1,200 dollars.
by Evan and Katelyn
- difficulty
- ●●●○○
- time
- a weekend
- license
- license not specified
- repo
- repo
●●●○○ · a weekend · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is a YouTube demonstration build, not a documented open-source project. Evan and Katelyn built a 32-inch transparent TV using an ultra-short-throw projector (811 dollars), nano holographic projection film (230 dollars), a sheet of glass, and a wooden base. The total cost was around 1,200 dollars including wood and shipping. The effect works: in a dark room the picture floats in the glass and you can see the room behind it. The limitation is brightness — in daylight the image fades badly, which they acknowledge on camera. The build itself is woodworking and careful film application, not electronics. The hardest part will be sourcing the right projector and film without a parts list, because the video does not name suppliers or model numbers beyond the final cost breakdown. If you are comfortable reverse-engineering a build from video footage and you have a dim room, this is a striking piece. If you need it to work in daylight or you expect step-by-step plans, you will waste the weekend.
IN THE REPO
GOOD TO KNOW
- —No repository exists for this build — it is a YouTube video project by Evan and Katelyn.
- —The video shows the full assembly but there are no downloadable plans, cut lists, or parts sourcing sheets.
- —The projector is an ultra-short-throw model that sits a few inches below the glass and covers 32 inches.
- —The projection film is a nano holographic film applied to ordinary glass.
- —In daylight the image gets faint — Evan and Katelyn say it is more transparent than it is monitor in bright conditions.
- —This is projection on film, not a transparent OLED panel like LG's $60,000 77-inch model.
Parts to buy
4 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
This build involves mains voltage — for adults comfortable with electrical work only.
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Cheap DIY Transparent TV
Shows the full assembly, film application, and daylight performance.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the video at 0:21-1:02 and 1:24 to see the nano film on glass and the projector placement. (This is the only documentation — no written guide exists.)
- 2.Source an ultra-short-throw projector that can cover 32 inches from a few inches away.(The video does not name the model. Budget around $811 based on their total.)
- 3.Buy 32-inch nano holographic projection film and a matching pane of glass.(Film was $230 in their build. Supplier not named.)
- 4.Build a wooden base to hide the projector and support the glass vertically.(No plans or cut list provided. Design from the video footage.)
KNOWN ISSUES
- The video does not name the projector model or film supplier — you are reverse-engineering the parts list from timestamps and final costs.
- Ultra-short-throw projectors that can cover 32 inches from a few inches away are a specific category, not all short-throw models will work.
- Applying the nano film without bubbles or dust takes patience and a clean workspace — one bad application wastes $230.
- The image is faint in daylight, which Evan and Katelyn state clearly at 23:51. If your room has windows, this will not replace a normal TV.
- With no BOM or plans, expect at least one full evening just sourcing parts and measuring the base dimensions from paused video frames.
- Glass is heavy and the edges are sharp — handle with gloves and plan the base structure to support the weight safely.
Can I use this as a daily TV?
Only in a dark room. In daylight the image gets faint — Evan and Katelyn say it is more transparent than it is monitor in bright conditions.
What projector do I need?
An ultra-short-throw model that can project 32 inches from a few inches away. The video does not name the model, but they spent $811 on it.
Where do I buy the projection film?
The video does not name the supplier. Search for 32-inch nano holographic projection film and expect to pay around $230.
Is this the same as LG's transparent OLED TV?
No. LG's $60,000 model is a 77-inch 4K transparent OLED panel. This is projection on film, and the image quality and brightness are nowhere near the same.
Are there plans or a cut list for the base?
No. You will need to design it from the video footage or build something similar that hides the projector and supports the glass.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
The projector was $811 and the film $230, and they freely admit the image gets faint in daylight. Would you build this for a dedicated home cinema space, or is the brightness trade-off a deal-breaker?
Evan and Katelyn
Evan and Katelyn are a YouTube maker couple who build DIY projects, often testing cheaper versions of expensive tech. This transparent TV build was their answer to LG's $60,000 transparent OLED, and they documented the entire process on camera.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM7d ago
Practical notes from our verification: this is a video demonstration build, not a repository. The video is excellent and shows every step, but there is no parts list, no cut list for the base, and no supplier links. The projector and film model numbers are never named on screen — the only hard numbers are the final costs at 21:46. Evan and Katelyn are honest about the daylight limitation at 23:51, which is more than most YouTube builds give you. If you are comfortable sourcing parts from a cost target and designing the base from video frames, this is a real build. If you need a shopping list and measurements, expect frustration.