TURN A SWITCH LITE INTO ONE THAT PLAYS ON YOUR TV
The only Switch that cannot connect to a TV, rebuilt with HDMI output and an OLED screen—no soldering required.
by Macho Nacho Productions
- difficulty
- ●●●○○
- time
- not stated in the video
- license
- license not specified
- repo
- repo
●●●○○ · not stated in the video · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is a hardware transplant for someone who wants the Switch Lite with TV output, something the Lite could never do. Macho Nacho Productions installed the Retro Remake Super5 kit: an OLED panel, an HDMI encoder board with a micro HDMI port where the headphone jack was, Hall effect sticks and a machined aluminium shell. All four mods install without soldering, though he says some parts are finicky, especially fitting the OLED panel without damaging the ribbon cable. The TV reported 1080p, which he suspects is upscaled from 720p. The kit maker rates the panel at around 600 nits versus about 340 for the Switch OLED. The honest problem: the HDMI version of the kit was sold out in the video, the machined shell he used is no longer available, and the kit, shell and sticks cost about 335 dollars on top of a 229.99 dollars console, more than a 399.99 dollars Switch OLED. This is not a budget play; it is a Lite that Nintendo never made.
IN THE REPO
GOOD TO KNOW
- —This is a commercial hardware kit (Retro Remake Super5), not an open-source design.
- —No repository, CAD files or schematics. The video shows the install, but he says it is not a detailed step-by-step tutorial.
- —The HDMI version of the kit was sold out at the time of the video, and the machined aluminium shell he used is no longer available.
- —The kit costs approximately 120 USD, the aluminium shell about 200 USD, Hall effect sticks about 15 USD—335 USD total before the console itself.
- —No modchip or custom firmware is involved; this is purely hardware replacement.
- —The kit maker claims the panel is around 600 nits versus 340 for the Switch OLED; independent measurement not verified.
Parts to buy
4 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Switch Lite OLED and HDMI mod by Macho Nacho Productions
Shows the OLED panel install, HDMI encoder and breakout board placement and the Hall stick swap in an aluminium shell, a TV output test at 14:38, a screen comparison with a stock Switch Lite, and the pros, cons and costs from 19:08.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the Macho Nacho Productions video in full before ordering anything (The HDMI kit was sold out when the video was published; check availability before buying the console.)
- 2.Source the Retro Remake Super5 kit, aluminium shell and Hall effect sticks(The HDMI kit was sold out in the video, and the machined shell he used is no longer available. The kit, shell and sticks cost about 335 USD before the console.)
- 3.Disassemble the Switch Lite following the video timestamps(Power the console down completely first, and keep careful track of your screws; an aluminium shell can come with its own different screws.)
KNOWN ISSUES
- The HDMI version of the kit was sold out in the video, other parts were pre-order only, and his own kit took more than a year to arrive because of production delays. Check availability before buying the console.
- The total cost is about 335 USD for parts plus 229.99 USD for the console, more than a 399.99 USD Switch OLED. This is for the form factor, not savings.
- The micro HDMI port replaces the 3.5 mm headphone jack, so the handheld no longer has a headphone jack.
- Fitting the OLED panel is the trickiest part: its ribbon cable has to go over the lip of the shell, and bending it too far back can damage the OLED panel.
- The 1080p output is likely upscaled from 720p, and up close on a 4K TV he noticed a bit of softness.
- The 600 nit brightness claim is from the kit maker, not independent measurement. It may be accurate, but it is not verified.
Does this work with a modchip or custom firmware?
No. It is hardware only: an OLED panel, an HDMI encoder board, Hall effect sticks and a new shell. No modchip or custom firmware is involved.
Can I keep the headphone jack?
No. The micro HDMI port goes where the 3.5 mm headphone jack was. Audio goes to the TV over HDMI, and Retro Remake also includes a hub with a dongle if you want the best audio quality on your TV.
Is the HDMI output true 1080p?
The TV reports a 1080p signal, but Macho Nacho suspects it is upscaled, because the Switch Lite typically renders at 720p. Up close on a 4K TV he noticed a bit of softness.
Is this cheaper than buying a Switch OLED?
No. The kit, shell and sticks cost about 335 USD, and the console is 229.99 USD, totaling about 565 USD. A Switch OLED is 399.99 USD. You do this for a Lite with TV output, not to save money.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
The HDMI kit was sold out when the video came out, and the whole build costs more than a Switch OLED, but it gives the Lite TV output it never had. Would you pay the premium for the smaller form factor, or just buy the OLED?
Macho Nacho Productions
Macho Nacho Productions is a YouTube channel. In this Retro Renews episode, Tito installs four solderless mods into a Switch Lite: Retro Remake's Super5 OLED kit with touch and HDMI out, Hall effect sticks and a machined aluminium shell. He ordered the kit around late 2024 and waited more than a year for it.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM18d ago
Practical notes from our verification: this is a commercial kit from Retro Remake, not an open-source design, and there are no public CAD files or schematics. The HDMI version was sold out at the time of the video, and the machined shell he used is no longer available, so check before buying the console. In the video he puts the kit at about 120 USD, the shell at about 200 USD and the sticks at about 15 USD, about 335 USD in total, plus 229.99 USD for the Lite, which is more than a 399.99 USD Switch OLED. The 600 nit brightness figure is from the kit maker. The micro HDMI port takes the place of the headphone jack.