BUILD A RADAR SENSOR THAT KNOWS EXACTLY WHERE YOU ARE IN A ROOM

A radar sensor that tracks where you are in a room, not just whether you moved.

by FEATURE.

HomeAutomation

Built withESP323D printing

difficulty
●●●○○
time
a weekend
license
license not specified
repo
repo ACTIVE279 stars
1
Jump to section

COMPAREE VERDICT

This is a working millimetre wave presence sensor that plugs into Home Assistant over Wi-Fi, Zigbee or Thread, built around an ESP32-C6 and one of two supported radar boards. The LD2450 gives you 2D position tracking so you can trigger zone-based automations (a reading lamp when you sit in the armchair, kitchen light when you approach the counter). The more sensitive DFRobot board has longer range but no position data. The PCB costs under a dollar per board if you order five from JLCPCB, the enclosure is a friction-fit 3D print with a ball joint mount, and the total comes to about 10 dollars per sensor versus 40 for commercial mmWave units. The catch: the README says upfront the detailed guide is not finished yet. If you have built an ESP32 project before and know your way around Home Assistant, this is a weekend. If this is your first time soldering headers or flashing firmware, wait for the guide to be finished or budget extra time for trial and error. The LD2450 lost presence once or twice in testing, the temperature sensor reads 6°C high from radar heat (corrected in firmware), and it needs USB power — the radar draws too much for a battery.

GOOD TO KNOW

  • —KiCad PCB files (Gerber zip), 3D print STL/3MF, ESPHome YAML configs all present.
  • —Detailed BOM with Mouser and AliExpress links, split by radar variant (LD2450 or DFRobot SEN0609).
  • —README explicitly states the full guide is not complete yet — files are there, detailed assembly steps are promised 'in a few days'.
  • —No step-by-step photos or wiring diagrams; assumes you know how to solder headers and flash ESPHome firmware.
  • —Licence file is present in the repository.

Parts to buy

4 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • ESP32-C6Find
  • One radar boardFind
  • HeadersFind
  • Optional SHTC3 temp/humidity sensor and 0805 capacitorsFind

Can I build this?

PrintEnclosure (FullAssembly.3mf), tightening ring must be 0.12mm layer height or threads fail, rest can be 0.2mm
BuyESP32-C6, one radar board (LD2450 for position tracking or DFRobot SEN0609 for range), headers (7-pin x2, plus 2mm pitch dual-row 4-pin for LD2450 or standard 5-pin for DFRobot), optional SHTC3 temp/humidity sensor and 0805 capacitors
ToolsSoldering iron, USB-C cable, 3D printer, Home Assistant instance, ESPHome desktop installer
SkillsSoldering headers, flashing ESPHome firmware, Home Assistant YAML editing — not beginner-friendly until the guide is complete
TimeA weekend if you know ESPHome, longer if you are learning as you go
Cost$10-12 per sensor plus shipping, dominated by the radar board and ESP32
SafetyUSB powered, low voltage throughout. No real hazards beyond ordinary soldering care.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

$6 and an ESP32: Beating IKEA and Open Sourcing it

Full build walkthrough, PCB ordering from JLCPCB, case assembly, Home Assistant integration

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Check the README note — the detailed guide is not finished yet, files are complete but assembly steps are coming
  2. 2.Watch the YouTube video for the full process
  3. 3.Order the PCB — download LD2450_HAT.zip from Releases, upload to JLCPCB
  4. 4.Buy parts from the BOM in the README — choose LD2450 or DFRobot radar variant
  5. 5.Print the enclosure — FullAssembly.3mf, tightening ring at 0.12mm layer height
  6. 6.Solder headers, flash ESPHome firmware (LD2450.yaml or SEN0609.yaml), edit secrets.yaml for WiFi

Resources

Documentation, files and community threads for this build — we link straight to the original sources and never rehost the creator’s files.

KNOWN ISSUES

  • If you are new to ESPHome or soldering, wait or expect to learn as you go.
  • The LD2450 needs a 2 mm pitch dual-row header, not the usual 2.54 mm one. The README warns about it, but it is easy to miss when ordering.
  • Not battery powered — the radar draws too much current. You need a USB power source within reach of where you mount it.
  • The temperature sensor reads about 6°C high from radar heat.
  • The tightening ring must be printed at 0.12mm layer height or the threads will not work. The README calls this out explicitly.
  • The LD2450 lost presence once or twice in testing. The DFRobot board is more sensitive but gives no position data.

Can I run this on battery?

No. The radar draws too much power for battery operation. USB power is required.

Which radar board should I pick?

LD2450 if you want 2D position tracking for zone-based automations. DFRobot SEN0609 if you need longer range (up to 25m) and higher sensitivity, but it only reports presence, not position.

Do I need to know how to code?

No, if you are already comfortable with Home Assistant and ESPHome. The firmware is pre-written YAML. You just edit secrets.yaml for your WiFi credentials and flash it.

Is the assembly guide finished?

Not yet. The README says all the files are uploaded but the detailed guide is coming in the next few days. If you know what you are doing, everything you need is there.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

The LD2450 lost presence once or twice in testing, but the DFRobot board never did — at the cost of losing all position data. Which would you pick for your space?

CompareeTEAM1mo ago

The YouTube video is the real walkthrough — it shows the JLCPCB ordering process, the case assembly, and the Home Assistant integration. The most surprising thing: the PCB supports two completely different radar boards on the same footprint, so you can pick sensitivity or position tracking without redesigning anything. One builder trap we spotted: the LD2450 uses a 2mm pitch header, not the standard 2.54mm — the BOM calls it out, but it is easy to miss if you are ordering in bulk.

FEATURE.

A maker and YouTuber who builds open-source smart home devices. This sensor came out of frustration with IKEA motion sensors that stop working when you sit still.

GitHub

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.