FIX A 2,000 DOLLAR DELL'S DEAD TOUCHPAD WITH COPPER TAPE FROM A TRASHED CHROMEBOOK
A 2,000 dollar laptop's touchpad kept dying until a repair shop fixed the ground with copper tape from a trashed Chromebook.
by Salem Techsperts
- difficulty
- ●●●○○
- time
- an afternoon
- license
- license not specified
- repo
- repo
●●●○○ · an afternoon · license not specified · repo
WHAT YOU’LL NEED
COMPAREE VERDICT
Salem Techsperts fixed an erratic touchpad on a Dell Inspiron 16 7610 whose touchpad had already been replaced, because the fault was in the design: a foam pad stopped the touchpad ground from making good contact with the copper grounding plate and screw. Instead of soldering a wire under the touchpad, he used copper adhesive tape peeled off an old HP Chromebook from the trash, checked it with a multimeter, and the touchpad worked again. It only helps laptops with that exact grounding flaw, and you need to be comfortable opening a laptop and using a multimeter.
IN THE REPO
GOOD TO KNOW
- —This is a repair technique, not a published project with files or a BOM.
- —The fix is specific to the Dell Inspiron 16 7610 and its grounding flaw.
- —The copper adhesive tape came from a scrapped HP Chromebook.
- —Opening a laptop can affect its warranty.
- —The repair video credits another video by Mr. Rendahl for the grounding wire idea.
- —No licence applies — this is a documented repair, not a design release.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Dell Couldn't Fix This Laptop. A Penny of Copper Tape Did.
Salem Techsperts' repair video, published 19 Sep 2026: the foam pad blocking the ground contact, the copper tape taken from a Chromebook, and the multimeter check.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Confirm the fault(Open the laptop, remove the touchpad assembly, and use a multimeter to check resistance between the touchpad ground pin and the copper grounding plate. If the foam pad is blocking contact, the resistance will be high or infinite.)
- 2.Source copper adhesive tape(He peeled copper adhesive tape off a scrapped HP Chromebook.)
- 3.Place the tape(Cut a strip long enough to bridge the touchpad ground pin to the copper grounding plate and screw. Press it down firmly and recheck resistance with the multimeter.)
- 4.Reassemble and test(Reinstall the touchpad, close the laptop, and test the cursor behaviour. If it still drifts or freezes, recheck the tape placement and contact.)
KNOWN ISSUES
- This fix is specific to the Inspiron 16 7610 grounding flaw. If you have a different Dell model or a different touchpad symptom, the copper tape may do nothing.
- Opening the laptop can affect the warranty. Replacement touchpads alone did not fix this one, because the flaw is in the grounding.
- You need a multimeter to confirm the ground fault before adding tape. Without measurement, you are guessing, and the real problem could be a torn flex cable or a failed controller.
- Soldering a wire under the touchpad would work but makes the surface uncomfortable to press. The tape fix avoids that, but only if you press it down firmly enough to make good contact.
Will this work on other Dell laptops with touchpad problems?
Only if it has the same grounding flaw: a foam pad blocking contact between the touchpad ground and the copper grounding plate. Measure with a multimeter first.
Does this void the warranty?
Opening a laptop can affect the warranty, so check your coverage first.
How do I know if the foam pad is the problem?
With the laptop open, measure resistance on the touchpad ground with a multimeter, as he does in the video, before and after adding the tape.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
This repair saved one customer after Dell replaced the touchpad twice and the fault kept coming back. Have you hit a similar design flaw where the manufacturer kept swapping the part but never fixed the root cause?
Salem Techsperts
Salem Techsperts is a repair shop that documents laptop and electronics fixes on YouTube. This repair credits another video by Mr. Rendahl for the grounding wire idea, which Salem adapted by using copper tape instead of solder.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM1mo ago
Practical notes from our verification: this is a documented repair, not a project with files. The fault is a specific grounding flaw on the Dell Inspiron 16 7610, so confirm it with a multimeter before trying the fix on any other laptop. Salem Techsperts credits another repair video for the grounding idea and used copper tape instead of soldering a wire.