BUILD A CAMERA THAT FILMS LIGHT
AlphaPhoenix built a camera that films a laser pulse flying across a room at 2 billion frames per second, using one mirror, one lens, and a photon detector that looks at one pixel at a time.
by AlphaPhoenix
- difficulty
- ●●●●●
- time
- weeks, plus calibration
- license
- license not specified
- repo
- repo
●●●●● · weeks, plus calibration · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is not a weekend project you can copy. It is a demonstration of a technique called single-pixel time-of-flight imaging, where a photomultiplier tube detects one pixel at a time and an oscilloscope samples at 2 billion times per second while a precisely steered mirror scans the scene. The laser fires thousands of times per second, and Python stitches the one-pixel recordings into an HD frame where light moves about 15 cm per frame. The result is stunning: you watch a laser pulse travel across a garage, bounce off mirrors, and splash off a disco ball. But there is no repository, no code release, no parts list, and no instructions. The photomultiplier and oscilloscope alone cost thousands of dollars, and the technique only works for perfectly repeatable events. If you want to understand the physics and see what is possible, the video is excellent. If you want to build one, you are reverse-engineering from a 29-minute explanation and sourcing lab-grade optics and electronics on your own. The single thing most likely to go wrong is underestimating the precision required for optical alignment and synchronization between the laser trigger, the PMT, and the oscilloscope.
IN THE REPO
GOOD TO KNOW
- —No repository. This is a demonstration project documented in a single YouTube video.
- —No bill of materials, CAD files, or firmware provided.
- —The photomultiplier tube and gigahertz oscilloscope are expensive lab equipment, not hobbyist parts.
- —A few hundred lines of Python are mentioned but not published.
- —The technique only works for events you can repeat exactly, like a laser pulse.
- —Requires a dark room with haze in the air, laser safety glasses, and precise optical alignment.
Parts to buy
6 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
A laser pointer at 2 billion fps makes the speed of light look... kinda weird
Explains the single-pixel scanning technique, photomultiplier operation, and Python stitching. No code or BOM provided.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the full video to understand the technique (This is not a step-by-step build guide. It is a demonstration of the physics and the result.)
- 2.Source a photomultiplier tube and gigahertz oscilloscope(These are lab-grade instruments. Expect to spend thousands of dollars or find surplus equipment.)
- 3.Build or buy a pulsed laser and precision mirror mount(The laser pulses thousands of times a second and the mirror mount has to repeat its positions precisely.)
- 4.Write Python code to synchronize the laser, PMT, oscilloscope, and stepper(A few hundred lines are mentioned in the video but not published. You are writing this from scratch.)
KNOWN ISSUES
- No code, no BOM, no repository. You are reverse-engineering the build from a 29-minute video.
- The photomultiplier tube and oscilloscope are lab equipment, not hobbyist parts. Expect thousands of dollars or months hunting surplus.
- This only works for perfectly repeatable events. You cannot film a one-off explosion or anything that changes between laser pulses.
- Optical alignment is unforgiving. A mirror that drifts by a fraction of a degree will blur the final image.
- You need a dark room with haze in the air for the laser to scatter into the camera. A clean room or bright daylight will not work.
- Laser safety is mandatory. The video shows safety glasses at 0:14-0:36. A pulsed laser at kilohertz rates can damage eyes faster than you blink.
Can I film anything other than a laser pulse?
Only if you can repeat it exactly, thousands of times. The camera records one pixel per laser pulse, so the event must be identical every time. A one-off explosion or anything that changes will not work.
How much does the photomultiplier and oscilloscope cost?
New lab-grade equipment costs thousands of dollars. Surplus or used instruments can be cheaper but require calibration and may need repair.
Is the Python code available?
No. The video mentions a few hundred lines but does not publish them. You are writing the synchronization and stitching code yourself.
Why does it need haze in the air?
The laser pulse has to scatter light toward the camera. In a clean room, there is nothing to scatter. Haze, fog, or smoke particles reflect a tiny fraction of the pulse into the lens.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
The camera films light moving 15 cm per frame, and the whole thing hinges on a laser that fires 3,000 times per second while a mirror steps through one pixel at a time. What repeatable event would you point this at if you had the oscilloscope and a weekend?
AlphaPhoenix
AlphaPhoenix demonstrates advanced physics and engineering projects on YouTube, often building lab-grade instruments in a garage to make research techniques accessible to a wider audience.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM14d ago
Practical notes from our verification: there is no repository, no code release, and no parts list. The video is the only source, and it is a demonstration of the physics rather than a build guide. The photomultiplier tube and gigahertz oscilloscope are lab instruments, not hobbyist parts, and the technique only works for events you can repeat exactly. The single biggest trap is underestimating what 'a few hundred lines of Python' means when you are synchronizing a pulsed laser, a photomultiplier, an oscilloscope, and a stepping mirror to sub-nanosecond timing. If you have access to the equipment and the skill to write the synchronization code, the video gives you enough to understand the technique. If you do not, this is inspiration rather than instruction.