TURN 100 CAR BATTERIES INTO A LIGHTNING BOLT
Styropyro wired 100 car batteries in parallel and pushed more than 45,000 amps through a bare bolt, more than the current of an average lightning strike.
by styropyro
- difficulty
- ●●●●●
- time
- do not attempt
- license
- license not specified
- repo
- repo
●●●●● · do not attempt · license not specified · repo
WHAT YOU’LL NEED
COMPAREE VERDICT
This is not a project you build. It is a documented experiment in extreme current. Styropyro connected 100 lead-acid car batteries in parallel: the voltage stays at a single battery's 12 V, but the currents add up. Each battery is rated 850 A, so in theory 100 of them could give 85,000 A, and the bank stores about 320 MJ. At 12 V he measured about 11,000 A through a bolt and 15,000 A through a saw blade. With the batteries rearranged into chains of five for about 60 V, a steel rod exploded into a cloud of green zinc plasma at a 30,000 A peak, the current of an average lightning strike. A bare bolt drew over 45,000 A for over a second before the fuses exploded, and the bank even cut steel in half. The physics is the real story: parallel adds current, series adds voltage, and opposite currents repel, the pinch effect that ripped copper blocks apart and keeps lightning thin. The creator says plainly that you definitely should not play with car batteries, and even one can hurt you. This page exists so makers understand what was measured, not so they repeat it.
IN THE REPO
GOOD TO KNOW
- —This is a YouTube demonstration video, not a build guide.
- —No repository, no schematics, no bill of materials, no safety manual.
- —The creator explicitly says you should not play with car batteries, even one can hurt you.
- —The page exists to document what was measured, not to encourage replication.
- —The numbers on this page come from the measurements shown in the video.
- —The real danger is not the 12 or 60 volts on its own, it is the tens of thousands of amps.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
styropyro: 100 car batteries in parallel
The full experiment with the measurements, the physics explained and the creator's warning not to play with car batteries.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Do not start(This is not a build guide and there is nothing to build. If you want to understand current vs voltage, watch the video. Do not connect car batteries together.)
KNOWN ISSUES
- Thinking 12 volts means harmless. In parallel the voltage stays at 12 V, but the current adds up to tens of thousands of amps.
- Underestimating what that current does: a steel rod exploded into plasma, fuses exploded and copper blocks were ripped apart in the video.
- Copying anything from the video. There is no safe version of this experiment and this page deliberately gives no build details.
- Believing one battery is harmless. Each battery in the video is rated 850 A, and the creator says even one can hurt you.
- Skipping the safety warning. Styropyro says it plainly: do not play with car batteries, even one can hurt you. He is not being cautious, he is being honest.
Should I try this with fewer batteries?
No. Styropyro says plainly that you definitely should not play with car batteries, and that even one can hurt you. Each battery in the video is rated for 850 A on its own.
What is the pinch effect he mentions?
Opposite currents repel each other, so a conductor carrying a huge current pushes itself apart. That is why his copper blocks were ripped apart, and it is the same pinch effect that squeezes lightning into a thin streamer.
Why did the rod turn green?
The steel rod had a zinc coating. It heated so quickly that the zinc boiled off, and the zinc vapour reacting with the air left a cloud of greenish plasma.
Could this actually be used as a plasma cutter?
In the video the bank did cut steel in half, but it was a demonstration of extreme current, not a practical tool.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
Styropyro pushed over 45,000 amps through a bare bolt with nothing but car batteries in parallel. Which part of the physics surprised you more: that the voltage stayed at 12 V, or that the current ripped copper blocks apart?
styropyro
Styropyro is a YouTube creator known for extreme high-current experiments. In this video he measures how much current 100 car batteries can push, and he warns viewers not to play with car batteries.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM25d ago
Practical notes from our verification: the YouTube video is the only source. There is no repository, no files and no build guide, and this page will not give one. Styropyro's Instagram handle is @styro.drake. The numbers on this page come from the video: 850 A per battery, about 320 MJ stored, about 11,000 A and 15,000 A at 12 V, a 30,000 A peak at about 60 V and over 45,000 A through a bare bolt. The useful lesson is the physics: parallel adds current, series adds voltage, and opposite currents repel. The creator's own warning stands: do not play with car batteries, even one can hurt you.