TURN A 60-YEAR-OLD DIESEL TRACTOR INTO AN ELECTRIC TRACTOR

A 60-year-old Massey Ferguson 65 that burned 11.7 liters of diesel per hour now runs on a 72 V battery pack, keeps the PTO and three-point hitch working, and hits 37 km/h.

by LiamTronix

WorkshopEnergy

difficulty
●●●●●
time
months
license
license not specified
repo
repo FINISHED
1
Jump to section

COMPAREE VERDICT

This is a commissioned one-off, not a replicable project. LiamTronix pulled the diesel engine from a roughly 60-year-old Massey Ferguson 65, coupled an ME1003 electric motor to the original transmission with a custom adapter, and wired a 72 V battery pack made from two 36 V 48 Ah modules through an Alltrax controller. The hydraulic pump for the three-point hitch is built into the transmission, so the hitch and PTO kept working after the swap. Top speed went from 24 km/h to 37 km/h, and peak draw was 239 A, about 20 kW. The diesel burned 11.7 liters per hour, roughly 125 kWh of energy, almost twice a Tesla Model 3 battery. This conversion is for an hour or two of light work a day and overnight charging, not all-day plowing. The battery is small for heavy field work, the adapter is model-specific, the build needed a lathe and welding, and it is high-current DC work with no margin for error. A new Monarch MK-V electric tractor costs about 89,000 dollars, but this was built for a friend with an old tractor and took from summer into the cold season. The one thing most likely to go wrong: the motor adapter, which LiamTronix first built with 3D printed parts and then replaced with metal ones he made himself.

GOOD TO KNOW

  • —This is a one-off conversion documented on YouTube, not a published build guide or repository.
  • —The parts list is given (ME1003 motor, Alltrax SR72400 controller, two 36 V 48 Ah SPIM08HP modules, BMS, 400 A fuse), but there are no CAD files, wiring diagrams, adapters or code.
  • —The motor adapter was custom-made for this tractor: 3D printed parts first, then metal parts from scrapyard steel plate, made with a lathe and welding.
  • —The build ran from summer into the cold season and required welding, a lathe, electrical skills and custom fabrication.
  • —The tractor belongs to a friend who commissioned the conversion; this was not a kit or repeatable project.
  • —There is no licence because there is no repository.

Parts to buy

11 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • ME1003 motorFind
  • Alltrax SR72400 controllerFind
  • Two 36 V 48 Ah SPIM08HP battery modulesFind
  • Off-the-shelf BMSFind
  • ContactorFind
  • 400 A fuseFind
  • Pre-charge resistorFind
  • ChargerFind
  • 3/8 inch steel plateFind
  • WiringFind
  • Whatever your transmission coupling demandsFind

Can I build this?

PrintNo print files are shared. LiamTronix 3D printed an alignment tool for the motor adapter, a throttle knob and a control panel; you would design your own.
BuyME1003 motor, Alltrax SR72400 controller, two 36 V 48 Ah SPIM08HP battery modules, an off-the-shelf BMS, contactor, 400 A fuse, pre-charge resistor, charger, 3/8 inch steel plate, wiring, and whatever your transmission coupling demands.
ToolsLathe, welder, 3D printer, large hole saw, engine hoist, adjustable power supply, hand tools, and the skills to use them all safely with high-current DC systems.
SkillsAdvanced metalworking, welding, electrical work at 72 V and 400 A, motor coupling design, and months of troubleshooting.
TimeMonths. This build ran from summer into the cold season, not a weekend swap.
Cost$$$, dominated by the motor, controller and batteries. The video does not give a total cost.
SafetyHigh-current DC at 72 V is dangerous. The BMS cannot see load current, so a 400 A fuse provides short circuit protection, and the controller needs pre-charging to avoid a big inrush spark. Draining fluids and removing a diesel engine means fuel spills and heavy lifting; LiamTronix used an engine hoist. There is no room for mistakes with this much current.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

I did an EV conversion of a tractor24:25

LiamTronix documents the conversion start to finish: the diesel speed test, removing the engine, fabricating the motor adapter, building and testing the battery pack, wiring the controller, and testing the finished tractor.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the full video (LiamTronix walks through the entire build, but this is documentation of a commissioned one-off, not instructions for replication.)
  2. 2.Source the motor and controller(These are the parts LiamTronix lists in the video description. Check availability and price before committing.)
  3. 3.Measure your transmission input shaft(The adapter couples the motor to your specific transmission — you will design and machine it yourself or pay someone who can.)
  4. 4.Plan the battery enclosure and wiring(Two 36 V 48 Ah modules in series give 72 V, but mounting, fusing and BMS wiring are all on you.)

KNOWN ISSUES

  • The motor adapter is the hardest part — it is custom to this tractor model and requires a lathe, welding and mechanical design skills. If you do not have those, this project stops before it starts.
  • The battery is sized for light work, not all-day plowing — do not expect to pull a heavy load for hours without planning for much larger batteries or accepting shorter runtime.
  • High-current DC at 72 V is not forgiving. The off-the-shelf BMS only handles 60 A, so it switches a contactor and cannot see the load current; a 400 A fuse inside the battery is the short circuit protection. The motor controller also sparks on connection from inrush current, so it needs a pre-charge resistor.
  • The three-point hitch and PTO only work because the hydraulic pump is built into the transmission on this specific tractor — if your model is different, you may lose those features entirely.
  • There are no CAD files, wiring diagrams or step-by-step instructions — you are reverse-engineering from a video of a commissioned build, which means you will solve every problem yourself.
  • This took LiamTronix from summer into the cold season, not a weekend. Budget time for fabrication, troubleshooting and testing.

Can I use a different motor or controller?

Yes, but you will design the adapter from scratch and ensure the motor torque and controller current rating match your tractor's load and transmission.

Will this work on my tractor model?

Only if your transmission input shaft and hydraulic pump layout are similar to the Massey Ferguson 65 — otherwise you are starting from zero on the adapter and hydraulics.

How long does the battery last under load?

LiamTronix sized it for 1-2 hours of light work at about 2 kW average draw; heavy plowing will drain it much faster or require a bigger pack.

Do I need a lathe?

LiamTronix bought a lathe for this build and says there was really no other way. He 3D printed an alignment tool and temporary adapter parts, then swapped them for metal parts he made from 3/8 inch steel plate from a scrapyard, and welded in an extension.

Is this cheaper than buying a new electric tractor?

A new Monarch MK-V had an MSRP of 88,998 dollars in January 2023. The video does not give a total cost for this conversion, and it took LiamTronix from summer into the cold season, so compare carefully before assuming it is cheaper.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

LiamTronix sized the battery for 1-2 hours of light work a day, not all-day plowing — the diesel burned 125 kWh per hour, almost twice a Tesla Model 3 battery. If you were converting a tractor, would you prioritize runtime or cost?

CompareeTEAM29d ago

Practical notes from our verification: this is a YouTube-documented commissioned build, not a repository or kit, and no CAD files, wiring diagrams or instructions are shared. The motor adapter is the hardest part and was custom-made for a Massey Ferguson 65 transmission; if your tractor model is different, you start from zero. The battery is small for heavy field work, the build ran from summer into the cold season, and high-current DC wiring at 72 V leaves no room for mistakes. LiamTronix did this for a friend with an old tractor; if you do not have a lathe, a welder and electrical experience, this is not the weekend project the reel makes it look like.

LiamTronix

LiamTronix is a YouTuber who had never done an EV conversion before this one. A friend owned this old Massey Ferguson 65 and asked him to convert it to electric, and the result is a working electric tractor that keeps the PTO and three-point hitch functional.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.