BUILD AN ELECTRIC MOTORCYCLE AT HOME FOR HALF THE PRICE OF A ZERO S

Build a 32 hp electric streetfighter in your home workshop for about 5,000 Canadian dollars, less than half the price of an equally sized Zero S.

by James Biggar

WorkshopEnergy

difficulty
●●●●●
time
2-3 weeks for a good fabricator (creator's estimate)
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

James Biggar built this electric streetfighter from scratch in his home workshop using basic tools, for about 5,000 Canadian dollars, which he says is less than half the price of an equally sized Zero S (the 2024 Zero S listed at 14,995 US dollars). A QS273 70H hub motor and Kelly KLS72601 controller give 12 kW continuous and 24 kW peak (32 hp) with 350 Nm of torque, running from a 74 V, 4.3 kWh LiFePO4 pack. The description lists up to 100 km of range, about 115 km/h at 72 V (150 km/h at 120 V), and a weight of just 136 kg. The video shows him welding the steel frame, shaping the bodywork, fitting the battery and the rear hub motor, then a burnout and road riding. This is not a beginner project: you are welding a load-bearing frame and wiring a high-energy battery pack, and the plans are paid, not free. Treat the 3.28 second 0-60 figure as the creator's calculation, not a measured run. The creator estimates a good fabricator could build it in 2 to 3 weeks. If you already have welding and fabrication skills and a workshop, this is a genuine path to a light, torquey electric motorcycle. If you have never welded a structure that carries a rider, this is not where you learn.

GOOD TO KNOW

  • —Plans are sold at resystech.com, not open source or free.
  • —The video shows the build process; the detailed build information is in the paid plans and the creator's project blog.
  • —Parts listed in the description: QS273 70H hub motor, Kelly KLS72601 controller, 74 V 4.3 kWh LiFePO4 battery pack, Shinko 705 120/70-17 front tyre, Metzeler Karoo Street 180/55-17 rear tyre, steel frame.
  • —No public CAD files; the description links only the paid plans and the project blog.
  • —The controller is an off-the-shelf Kelly KLS72601; the description does not mention any custom firmware.
  • —The 0–60 time of 3.28 seconds is calculated, not measured on a track.

Parts to buy

7 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • QS273 70H hub motorFind
  • Kelly KLS72601 controllerFind
  • 74 V 4.3 kWh LiFePO4 batteryFind
  • Steel for the frameFind
  • Shinko 705 120/70-17 front tyreFind
  • Metzeler Karoo Street 180/55-17 rear tyreFind
  • Paid plans from resystech.comFind

Can I build this?

Printnothing required
BuyQS273 70H hub motor, Kelly KLS72601 controller, 74 V 4.3 kWh LiFePO4 battery, steel for the frame, Shinko 705 120/70-17 front tyre, Metzeler Karoo Street 180/55-17 rear tyre, and the paid plans from resystech.com
ToolsThe creator says he used basic tools in a home workshop. The video shows welding the steel frame and shaping the bodywork, so you need a welder and metalworking tools; the parts and materials are listed on his project blog.
Skillswelding and metal fabrication, high-energy DC wiring and motorcycle assembly; rated 5/5 because the frame carries the rider and the pack stores 4.3 kWh
Time2-3 weeks for a good fabricator, by the creator's estimate. He did not track his own hours.
Cost$$$: about 5,000 Canadian dollars in total, per the creator. He adds that 2-3 weeks of a fabricator's time at about 20 dollars an hour would be roughly another 2,000 dollars in labour.
SafetyYou are welding a load-bearing steel frame and wiring a 74 V, 4.3 kWh LiFePO4 pack to a 24 kW peak hub motor. Both carry real risk of fire, burns and injury if done badly. The source does not cover road legality, so check your local rules for home-built vehicles before riding on public roads.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

Building An Electric Motorcycle - DIY E-Moto!

Full build walkthrough: frame welding, bodywork shaping, motor and battery install, burnout and road test. Published 17 Nov 2020, ~17.6M views.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the build video to see if you have the fabrication skills (The video shows every major step; the full details are in the paid plans and the creator's project blog.)
  2. 2.Buy the plans (Sold at resystech.com, not free and not open source.)
  3. 3.Source the motor, controller and battery cells(QS273 70H hub motor, Kelly KLS72601 controller and a 74 V, 4.3 kWh LiFePO4 pack. The whole bike came to about 5,000 Canadian dollars.)
  4. 4.Weld the frame to the listed geometry(The description lists a 55 inch (140 cm) wheelbase, 26 degree rake and 4.9 inch (124.5 mm) trail. In the video the frame is welded before the bodywork, battery and motor go on.)

KNOWN ISSUES

  • The plans are paid and sold at resystech.com. There is no open-source repo and no free STLs or Gerbers; the free material is the video and the creator's project blog.
  • The frame is welded steel and carries the rider, the battery and a 350 Nm hub motor. The description lists the geometry (55 inch wheelbase, 26 degree rake, 4.9 inch trail), but the full build details are in the paid plans and the blog, so do not improvise the frame from the video alone.
  • The battery is a 74 V, 4.3 kWh LiFePO4 pack. The video and description do not walk through pack safety, so treat battery assembly and wiring as high-energy DC work and follow the plans and the component makers' instructions.
  • The 0-60 time of 3.28 seconds is the creator's calculation from the bike's mass (136 kg) and starting torque using online calculators, not a measured run.
  • The headline 150 km/h top speed is for running at 120 V. With the 74 V pack shown, the description lists about 115 km/h.
  • The video and description say nothing about registration, insurance or road legality. Check your local rules for home-built vehicles before riding on public roads.

Is this street legal?

The video and description do not cover registration or road legality. Rules for home-built vehicles differ by country, so check with your local vehicle authority before you build or ride it on public roads.

Can I build this without welding?

Not as shown. The video shows the steel frame being welded, and the description does not offer a no-welding alternative.

What is the real top speed?

The description lists about 115 km/h (71 mph) at 72 V and 150 km/h (93 mph) at 120 V. The pack shown is a 74 V LiFePO4 battery, so the 150 km/h figure needs the higher voltage.

How does it compare to a Zero S?

The creator says he built it for less than half the price of an equally sized Zero S, at about 5,000 Canadian dollars. For reference, the 2024 Zero S listed at 14,995 US dollars MSRP in North America. The description compares weight and power with a 300cc petrol bike, not range or features with the Zero.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

This bike was built for about 5,000 Canadian dollars, and a new 2024 Zero S listed at 14,995 US dollars, but you need welding skills and a workshop. If you were building one, would you stay at 72 V for about 115 km/h or push it to 120 V for 150 km/h?

CompareeTEAM28d ago

Practical notes from our verification: the build video has about 17.6 million views and shows every major step, but the plans are sold at resystech.com, not released as open source. The specs come from the creator's description (24 kW peak, 350 Nm, 136 kg), and the 0-60 time of 3.28 seconds is his calculation, not a measured run. The biggest skill gate is the welding: the frame is welded steel and carries the rider and a 350 Nm hub motor. The second gate is the high-energy DC work on a 74 V, 4.3 kWh pack. The source says nothing about road legality, so check local rules before you ride it.

James Biggar

James Biggar runs Renewable Systems Technology (RST) and built this streetfighter from scratch in his home workshop using basic tools. It uses the same 24 kW (32 hp) drivetrain as his earlier Cyber Trike project. He sells the plans at resystech.com and writes up the parts, materials and build process on his project blog.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.