
YOUR OLD IPOD GETS BLUETOOTH AND WI-FI
A drop-in board that gives your old iPod Bluetooth, USB-C and a 2TB SD card slot — no soldering, fully reversible.
by certain things
Built withRaspberry PiRaspberry Pi Pico / RP2040
- difficulty
- ●●○○○
- time
- an afternoon
- license
- license not specified
- repo
- repo
●●○○○ · an afternoon · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
Sprout is a replacement motherboard for iPod 3rd/4th gen and iPod mini 1st/2nd gen that adds Bluetooth audio, Wi-Fi, USB-C charging, a hi-fi DAC and support for up to a 2TB SD card. It keeps the original screen, click wheel and case, requires no soldering and the swap is fully reversible. The Pico version runs on a Raspberry Pi RP2350 and plays your own music offline; the Pi version adds a Raspberry Pi Compute Module Zero for streaming apps and AirPlay. The interface is lightweight and familiar, and the Pi version runs Linux underneath so you can install custom software. The biggest limitation is that this is a pre-launch product with no open files. Streaming services are working proofs of concept only — APIs change often and there is no guarantee what will work at launch. The 40-hour battery claim is a prototype test target, and Google Cast is still in development. If you want to build one this weekend, you cannot. If you want to back it when it launches and accept that streaming may not work reliably, it is a well-documented restore for a device Apple stopped making in 2022.
IN THE REPO
GOOD TO KNOW
- —Not yet on sale — launch via Crowd Supply sign-up.
- —No open build files, PCB designs or firmware published.
- —Spotify and Apple Music work only as proofs of concept as of September 2026; streaming service availability at launch may differ.
- —Google Cast still in development.
- —40-hour battery life is a target from prototype testing, not guaranteed.
- —Licence not stated; project page does not confirm commercial use rights.
Parts to buy
4 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
certain things demonstration video
Project demonstration from certain things studio, 6 October 2026
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Sign up for launch notification (Project page with Crowd Supply sign-up — no purchase link yet)
- 2.Verify your iPod model(Supported: iPod mini 1st/2nd gen (Pico only), iPod 3rd gen, iPod 4th gen)
- 3.Decide Pico or Pi(Pico for offline playback only, Pi for streaming apps and AirPlay — streaming services are proofs of concept and may not work at launch)
- 4.Watch the disassembly process (No soldering required but iPod cases are fragile — practice on a donor unit if possible)
Resources
Documentation, files and community threads for this build — we link straight to the original sources and never rehost the creator’s files.
KNOWN ISSUES
- The board is not yet on sale and there is no confirmed launch date — the project page only offers a Crowd Supply sign-up.
- Streaming services (Spotify, Apple Music, Google Cast) are working proofs of concept as of September 2026 and may not be available or reliable at launch because APIs change often.
- The 40-hour battery life is a target from prototype testing, not a tested production guarantee.
- iPod mini only supports the Pico version — the Pi version does not fit.
- No open build files are published, so you cannot make your own board or verify the design before buying.
- Original iPod cases have fragile clips — if you break one during disassembly, the case will not close properly and replacements are hard to find.
Can I use Spotify on this?
Spotify is a working proof of concept as of September 2026 but streaming service availability at launch may differ because APIs change often. The Pico version does not support streaming at all — only the Pi version does.
Will this void my iPod warranty?
Apple stopped making iPods in May 2022 and any warranty has long expired. The swap is fully reversible so you can restore the original motherboard if needed.
What audio formats does it support?
MP3, AAC, ALAC, FLAC and Opus. The hi-fi DAC is a CS43131 or similar and works over the original 3.5 mm headphone jack.
How much does it cost?
Pricing not yet published. The project page only has a Crowd Supply sign-up form.
Can I install custom apps on the Pi version?
Yes — it runs Linux underneath so you can install whatever you like, but there is no documentation yet on how to do that.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
Apple stopped making iPods in 2022 and Sprout gives the 3rd/4th gen and mini a 2TB SD card, Bluetooth and USB-C — but streaming services are still proofs of concept and the board is not on sale yet. Would you swap the board in an iPod you already own, or hold out for a production unit with confirmed app support?
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM12d ago
Practical notes from our verification: the project page is live at certainthin.gs/sprout with detailed specs and a Crowd Supply sign-up, but there is no purchase link, no price and no confirmed launch date. The biggest unknown is streaming — Spotify and Apple Music are working proofs of concept only, and the page explicitly warns that APIs change often so availability at launch may differ. The 40-hour battery claim is a prototype test target, not a production guarantee. No build files, firmware or schematics are published, so this is a buy-it-when-it-launches product, not a make-your-own one.