
MAKE YOUR AIRPODS CASE REPAIRABLE
A 3D-printed frame that lets you open a glued-shut AirPods case, swap the battery, and close it again without Apple's 59 dollars replacement.
by Ken Pillonel
Built with3D printing
- difficulty
- ●●●●○
- time
- an evening
- license
- WTFPL
- repo
- repo ACTIVE609 stars
●●●●○ · an evening · WTFPL · 609 stars · repo ACTIVE
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
Ken Pillonel designed a 3D-printed frame that holds an AirPods charging case together after you cut it open to replace the battery or Lightning port. Apple glues and clips the shell shut, charges 59 dollars for a replacement case, and does not sell spare parts. Ken's frame slides in after you crack the case open with any cutting tool in under five minutes, then holds everything together so it closes cleanly. He also designed an S-shaped USB-C flex PCB to replace the Lightning port, which fails often and cannot be bought as a spare. The repo has STL files for gen 1, gen 2, and Pro cases, plus KiCad files and Gerber exports for the USB-C board. What it does not have is any kind of build guide, parts list, or battery sourcing advice. You will be working next to a lithium cell with a cutting tool, and the shell is destroyed in the process — if you mess up the cut or the frame fit, you have no case at all. The frame prints cleanly on a resin printer; an FDM print will be rougher and may not fit as tightly. This is for someone who has already broken a case, knows how to source a replacement battery, and is comfortable working without instructions. The most likely failure is cutting the shell poorly and having no way to hold it together afterward.
IN THE REPO
GOOD TO KNOW
- —STL files for the liberation frame (gen 1, gen 2, Pro) and KiCad PCB files for the USB-C replacement board are in the repo.
- —No BOM, no build guide, no assembly instructions — only the 3D files and circuit board files.
- —The repo says 'nothing in this repository is part of Apple's Intellectual Property', but this is repair tooling for a product Apple designed to be unrepairable.
- —WTFPL licence — no restrictions on use, commercial or otherwise.
- —Last updated April 2025; the original video is from July 2022.
- —You will cut the original shell open permanently — this is not reversible.
Parts to buy
3 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Exploring the Simulation (Ken Pillonel)
20 Jul 2022
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Check your AirPods case model number (printed inside the lid). This repo covers gen 1 (A1602), gen 2 (A1938), and Pro (A2190). Gen 3 and Max have different STLs.
- 2.Print the liberation frame for your model from the liberation_kit folder. Resin printing is recommended for fit.
- 3.Source a replacement battery for your case generation (not included in the repo).
- 4.Cut the case shell open carefully with a Dremel or blade, avoiding the battery. The video shows the process at 2:31.
- 5.Swap the battery, slide in the printed frame, and close the case.
Resources
Documentation, files and community threads for this build — we link straight to the original sources and never rehost the creator’s files.
KNOWN ISSUES
- The repo does not list which battery to buy. You will need to identify the correct cell for your case generation yourself, and it is not a common size.
- The shell is destroyed when you cut it open. If the frame does not fit or you cut poorly, you have no case.
- FDM prints may not fit tightly enough. Ken used a resin printer (Anycubic Photon Mono X) for clean tolerance.
- The USB-C replacement board is an advanced project on its own: you are ordering a custom flex PCB, sourcing SMD components, and soldering them. The repo has KiCad files but no assembly guide.
- The Lightning port replacement requires metal brackets that you fabricate from DXF files. The repo does not say what material or thickness.
- You are working next to a lithium cell with a cutting tool. One slip and the battery vents or catches fire.
Which AirPods cases does this support?
Liberation frames are for gen 1 (A1602), gen 2 (A1938) and Pro (A2190) cases. The usb-c_protection_cases folder has separate printable protective cases for other models, including gen 3 and Max, not repair frames.
Where do I buy the replacement battery?
The repo does not list a source. You will need to find the correct cell for your case model, which is not a standard size sold widely.
Can I print this on an FDM printer?
Yes, but resin is recommended. The frame needs to fit tightly inside the shell, and FDM layer lines may prevent a clean close.
Do I have to replace the Lightning port with USB-C?
No. The liberation frame is just to hold the case together after opening it. The USB-C board is a separate, optional upgrade.
Is this reversible?
No. You cut the original shell open, and it cannot be glued back to factory condition.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
Apple charges $59 for a replacement case and designs the shell to be unrepairable — Ken cut it open in under five minutes. Would you attempt this on a dead case, or is the risk of destroying it completely too high?
Ken Pillonel
Ken Pillonel runs the YouTube channel Exploring the Simulation and is known for building the first USB-C iPhone. He shares his repair and USB-C mods as open files.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM12d ago
Practical notes from our verification: the repo was last updated in April 2025, and the original video demonstrating the process is from July 2022 and the case models have since moved on (gen 4 is now current). The WTFPL licence is as permissive as it gets, but there is no parts list, no battery sourcing guide, and no step-by-step — you get STL files and KiCad schematics and are expected to work it out. The USB-C replacement board is a serious electronics project requiring flex PCB fabrication and SMD soldering; the liberation frame is simpler but still demands a clean print and a steady hand with a cutting tool next to a lithium cell. If you already have a dead case and nothing to lose, this is a weekend well spent. If the case still works, think twice before cutting it open.