BUILD A FULL-SIZE FACTORY ROBOT IN YOUR GARAGE

Jeremy Fielding machined, welded and wired a factory-grade robotic arm in his home shop — then programmed it to plasma cut steel.

by Jeremy Fielding

RoboticsWorkshop

difficulty
●●●●●
time
a year and a half
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

Jarvis is a full-size six-axis industrial robot arm that Jeremy Fielding designed, machined, welded and wired in his home shop over about a year and a half. He had owned his mill for only a couple of months when he started, so the aluminium parts were machined as he learned. He welded the base, wired the control cabinet, and used 240 volt AC servo motors with brakes on the lower three axes so the arm will not drop a load if power is lost. Strain-wave gearboxes give near-zero backlash. After robotics training classes at two companies, he moved to a customised off-the-shelf controller. The arm homes on limit switches, runs like a six-axis CNC machine and is programmed in RoboDK. For the demo it plasma cut an arc in a steel plate right along the drawn line. This is a reference build, not a guide: the controller, motors and gearboxes are bought parts with no part numbers or prices, cost is never stated, and the project involves 240 volts and a live plasma torch.

GOOD TO KNOW

  • —This is a documented build in a single YouTube video, not a repository or kit.
  • —No CAD files, BOM, or step-by-step instructions are provided.
  • —The controller, AC servo motors, strain-wave gearboxes and brakes are bought industrial components — sources and part numbers are not given.
  • —No licence is stated; the video is educational documentation of a personal project.
  • —Cost is never mentioned in the video.
  • —This is a serious machine shop build requiring a mill, welder, 240V wiring and plasma torch experience.

Can I build this?

Printnothing required
BuyBought parts named in the video: 240 volt AC servo motors (with brakes on axes 1 to 3), strain-wave (harmonic drive) gearboxes and a customised off-the-shelf robot controller (brand not named). No part numbers, suppliers or BOM.
ToolsShown or named in the video: milling machine, CNC router, welder, plasma torch, SolidWorks CAM for the machined parts and RoboDK for programming the robot.
SkillsMachining, welding, 240 volt electrical work and robot programming. Jeremy learned machining during the project and calls it the most difficult thing he has ever built.
Timeabout a year and a half, working in a home shop while learning
CostNot stated by Jeremy. For context, industrial six-axis arms typically cost factories tens of thousands of dollars (industry estimate: 35,000 to 85,000 USD).
Safety240 volt mains in the control cabinet and a live plasma torch during operation. Both can kill. This is not a project for someone new to high-voltage wiring or plasma cutting.

This build involves mains voltage — for adults comfortable with electrical work only.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

Full-size industrial robot from scratch20:37

Summary video of the Jarvis 2.0 series: machining, welding, a Q&A on motors, gearboxes and control, and the plasma cutting demo.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the full build video (The entire project is documented here, but there are no files or instructions to download.)
  2. 2.Understand what the build involved(Machining, welding, 240 volt servo wiring, robot programming and plasma cutting over about a year and a half. This is a reference build, not a how-to.)

KNOWN ISSUES

  • The video does not list part numbers, suppliers or costs for the motors, gearboxes or controller.
  • The controller is a customised off-the-shelf unit and Jeremy does not name the brand. He switched to it after robotics training showed him his homemade control was far from the safety and reliability a robot this size needs.
  • Jeremy was new to machining and kept a box of failed parts, broken limit switches and a fried IO board. He says nothing in the video should be taken as machining advice.
  • 240V cabinet wiring and a live plasma torch are both serious safety risks — a mistake can be fatal, and there is no step-by-step safety guide in the video.

Are the CAD files or a BOM available?

No. This is a video walkthrough of a personal build, not a published design. You would have to measure and design your own parts based on the footage.

What does it cost to build?

Jeremy never says what Jarvis cost. The controller, the 240 volt AC servo motors and the strain-wave gearboxes are bought industrial parts, and no prices are given.

Can I build this without a mill?

The video does not cover that. Jeremy machined the aluminium parts himself on his own mill, which he had owned for only a couple of months when he started.

What would I use a robot like this for?

In the video Jarvis plasma cuts an arc in a steel plate along a drawn line. Jeremy does not list other uses.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

Industrial six-axis arms cost factories 35,000–85,000 USD, and Jeremy built Jarvis in about a year and a half in his home shop. If you had the space and the time, what would you program it to do first?

CompareeTEAM20d ago

Practical notes from our verification: this project is documented in a summary video, with no repository, no files and no stated licence. The finished arm plasma cuts steel right along the line, but Jeremy never lists part numbers, suppliers or total cost, and he does not name the controller. He is open about the mistakes: he was new to machining, and he shows a box of failed parts and a fried IO board. Watch it as an honest look at what building a full-size industrial robot takes, not as a tutorial.

Jeremy Fielding

Jeremy Fielding is a YouTuber whose channel is about exploring challenging projects and teaching engineering along the way. He had only owned his mill for a couple of months when he started Jarvis, and he calls it the most difficult thing he has ever tried to build.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.