TURN AN 88-INCH OLED TV INTO A WORKING GIANT IPHONE

Matt from DIY Perks built a person-height touchscreen iPhone replica from an 8K OLED TV — and destroyed the first TV trying.

by Matt (DIY Perks)

DisplaysWorkshop

difficulty
●●●●●
time
weeks
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

This is not a project you can build — it is a professional commission job documented on video. Matt built an 88-inch touchscreen styled as an iPhone for YouTuber Arun Maini, using an 8K OLED TV, custom capacitive touch foil, acrylic layers, and UV-cured LOCA adhesive. The first TV died when glue seeped into the panel, so they started over with a new TV and silicone edge sealing. Inside an aluminium truss frame sit a PC running Bliss OS (Android skinned to look like iOS, because iOS cannot drive external touch), a Canon R5 as the main camera, a Sony RX10 telephoto behind a motorized mirror, big speakers, and a 400-watt water-cooled studio LED as the flashlight. It plugs in via a 3D-printed oversized connector around a kettle lead and sits on a motorized TV stand. The thing most likely to go wrong is believing this is a weekend project — it is not.

GOOD TO KNOW

  • —This is a one-off commission build for Mrwhosetheboss, not a project with files.
  • —No CAD, no BOM, no build guide, no code repository.
  • —The video shows the process but is not a step-by-step tutorial.
  • —You would need to reverse-engineer every part from the video.
  • —The first TV was destroyed when optically clear adhesive seeped under the OLED layer.
  • —No licence — this is documentation of a custom build, not a release.

Parts to buy

10 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • 88-inch 8K OLED TVFind
  • Capacitive touch foilFind
  • Acrylic sheetFind
  • LOCA UV adhesiveFind
  • Aluminium trusses and sheetingFind
  • Canon R5Find
  • Sony RX10Find
  • 400 W studio LEDFind
  • PC hardwareFind
  • Motorized TV standFind

Can I build this?

Printnothing available — the USB connector was 3D printed but no file is shared
Buyan 88-inch 8K OLED TV, capacitive touch foil, acrylic sheet, LOCA UV adhesive, aluminium trusses and sheeting, a Canon R5, a Sony RX10, a 400 W studio LED, PC hardware, a motorized TV stand
ToolsUV curing rig, precision lamination setup, metalwork tools, soldering, PC assembly, camera control software
Skillsprofessional-level fabrication, display lamination experience, custom electronics integration, materials science intuition — this is not a first build
Timeweeks of full-time work for someone with the skills; months for someone learning
Cost$$$ — the 88-inch 8K OLED TV alone costs thousands, and that is before the cameras, touch foil, and everything else
SafetyMains voltage for the TV and LED. Risk of catastrophic OLED damage during lamination. Acrylic dust when cutting. Water-cooled LED requires leak management.

This build involves mains voltage — for adults comfortable with electrical work only.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

Building the world's largest WORKING iPhone! (DIY Perks)

Not a tutorial — a documentary of a commission build.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the video to see what is involved (This is not a build guide — it is a showcase of a one-off project with no files.)
  2. 2.Understand that replication is not realistic(No CAD, no BOM, no code, no instructions. You would reverse-engineer everything from video frames.)

KNOWN ISSUES

  • Believing this is a buildable project — it is not. There are no files and no instructions.
  • Underestimating the cost — an 88-inch 8K OLED TV costs thousands before you buy anything else.
  • Skipping the edge seal step — the first TV died because LOCA glue seeped under the OLED layer and destroyed the panel. The second attempt used silicone edge sealing.
  • Thinking iOS can drive an external touchscreen — it cannot. This runs Bliss OS (Android) skinned to look like iOS.
  • Attempting LOCA lamination without experience — this is a professional display technique with a high failure rate and no undo.
  • Ignoring weight and handling — the finished device requires multiple people to lift and move.

Can I actually build this?

No. This is a one-off commission with no files, no BOM, and no build guide. You would have to reverse-engineer everything from the video, and the first attempt destroyed a TV worth thousands.

Does it run iOS?

No. iOS cannot drive an external touchscreen, so it runs Bliss OS (Android) skinned to look like iOS.

What cameras does it use?

A Canon R5 full-frame with a 28 mm lens as the main camera, and a Sony RX10 telephoto behind a motorized 45-degree mirror.

What went wrong on the first attempt?

LOCA glue seeped under the OLED layer and destroyed the TV. The second attempt sealed the edges with silicone first.

Is there a world record?

Not officially. The video suggests it may be the largest working smartphone replica, but no record has been verified.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

The first 88-inch OLED TV died when glue seeped under the panel, so they bought a second one and started again. What would you have done differently the first time?

CompareeTEAM1mo ago

Practical notes from our verification: this is not a project with files. It is a one-off build documented on video. The single biggest cost is the 88-inch 8K OLED TV itself, which had to be replaced with a brand new one after the first was destroyed during lamination. If you are looking for a giant touchscreen project with actual instructions, this is not it, but the video is worth watching to see how far a home build can go.

Matt (DIY Perks)

Matt from DIY Perks builds high-end custom hardware projects for his YouTube channel. He built this giant iPhone with Arun Maini (Mrwhosetheboss) to mark their channel overtaking Apple in YouTube subscribers.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.