TURN MAGNETS AND CHUNKY LEDS INTO GLOWING TILES THAT SNAP TOGETHER
Chunky addressable LEDs on PCBs that snap together with magnets and light up in sync.
by bitluni
Built withArduino3D printing
- difficulty
- ●●●●○
- time
- a weekend-plus
- license
- license not specified
- repo
- repo ACTIVE306 stars
●●●●○ · a weekend-plus · license not specified · 306 stars · repo ACTIVE
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is a modular LED display where each tile is a custom PCB populated with through-hole WS2812D addressable LEDs, an ATtiny microcontroller, and magnet connectors that carry power and data between tiles. The PCB design is clever: staggered holes let the LEDs push in, then oval pads on the second revision make soldering easier. The magnet connectors are off-the-shelf parts that snap the tiles together and handle power distribution without extra wiring. A 3D printed case holds everything, and a separate magnetic battery module powers the array. Bitluni built this after surface-mount LEDs on an earlier wall kept dying from power surges, so the chunky through-hole LEDs are the entire point — they survive higher current and are easier to replace. The catch: there is no BOM beyond the LEDs and connectors, no assembly guide, and no licence. The PCBs came from a sponsor, so you will need to order them yourself or find a board house that can handle the KiCAD files. The firmware needs a UPDI programmer and the megaTinyCore Arduino library, and while the README mentions WLED integration, there is no config file or wiring example. One tile failed from a cold solder joint in the video, which is the risk when you are hand-soldering 256 pins. If you have built addressable LED projects before and can work from KiCAD files and video footage, this is a weekend-plus of careful soldering. If you need a step-by-step guide or a tested BOM, you will be filling in the gaps yourself.
IN THE REPO
GOOD TO KNOW
- —KiCad files for the 6x6 tile, an Arduino sketch for the ATtiny1604, and STL/3MF/Blender files for the cases and battery module.
- —No BOM — the README lists WS2812D LEDs, magnet connectors and an ATtiny1604 with affiliate links, but no capacitors, resistors, wire or battery specs.
- —No build guide or assembly instructions. The video shows the process but the repository has no written steps.
- —No licence file in the repository. The video mentions the PCBs came from sponsor AISLER.
- —The firmware requires the megaTinyCore library and a UPDI programmer (links in README).
- —WLED control is shown in the video, not documented in the repository.
Parts to buy
5 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Making oddly satisfying LED magnet tiles
The project video — shows PCB design, LED assembly, magnet connector installation, case printing, and the tiles lighting up. 1.64M views, 13 Oct 2024.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the project video (The only assembly reference — no written guide in the repository.)
- 2.Order the PCBs(Use the KiCad files in PCB/miniwall1b6x6/. The 6x6 tile is the one with board files.)
- 3.Buy the LEDs and connectors(WS2812D through-hole (5mm or 8mm — not the surface-mount version), magnet connectors (link in README), and ATtiny1604.)
- 4.Install the Arduino library and UPDI programmer (The firmware needs megaTinyCore. If you do not have a UPDI programmer, the README links a DIY version.)
- 5.Solder and test one tile first(Test data flow and check for cold joints before building more tiles.)
Resources
Documentation, files and community threads for this build — we link straight to the original sources and never rehost the creator’s files.
KNOWN ISSUES
- The repository has no BOM beyond the LEDs, magnet connectors and ATtiny1604. He skipped the usual per-LED resistors and capacitors, so you follow his design or add your own.
- One cold solder joint broke a tile in the video, and finding which pin failed in a chain of 36 addressable LEDs is not fast.
- The magnet connectors are only linked through an AliExpress affiliate link in the README, with no part number.
- The PCB files are for the 6x6 tile. The video also shows 5x5 and 8x8 versions, but only an 8x8 Blender model is in the repository, not separate board files.
- There is no licence file, so commercial use or derivative work is legally ambiguous. The video mentions the PCBs came from sponsor AISLER.
- WLED control is shown in the video but not documented in the repository.
Can I use surface-mount WS2812 LEDs instead of the bulky through-hole ones?
The PCB is designed for through-hole WS2812D LEDs with four legs. Surface-mount WS2812 or WS2812B have a different footprint and the whole point of this project was to avoid surface-mount after they kept dying from power surges on an earlier build.
Do I need one ATtiny per tile or one for the whole array?
Each tile has its own ATtiny1604 running the patterns. In the video he also shows an external WLED driver taking over a tile's LEDs through a 470 ohm resistor.
What battery does the magnetic battery module use?
The repository does not say. The STL files show a case and cap but no specs for cell type, capacity or protection board.
Can I control the tiles from a phone or computer?
The video shows an external WLED driver overruling the ATtiny through a 470 ohm resistor on the LED line. The repository has no WLED configuration or wiring diagram.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
The 6×6 tile uses 36 LEDs and 144 solder joints; the 8×8 uses 64 LEDs and 256 joints. One cold joint killed a tile in the video. How would you test each tile before sealing it in the case?
bitluni
bitluni builds LED displays, audio projects and retrocomputing experiments on YouTube. He started this after surface-mount LEDs on an earlier LED wall kept dying from power surges and were hard to replace, so he switched to chunky through-hole addressable LEDs.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM1mo ago
Practical notes from our verification: the repository has the 6x6 KiCad board, the ATtiny1604 sketch and the 3D printed case and battery files, but no BOM beyond LEDs, magnet connectors and the ATtiny, no written assembly guide and no licence file. The magnet connectors are only linked via an AliExpress affiliate link. The video is the build reference, including the WLED trick and the cold solder joint that broke one tile.