BUILD AN ELECTRIC BIKE THAT RIDES INSIDE ITS OWN WHEEL

A steel wheel 145 cm tall with two motors inside and you sitting in the middle, riding it down the road like a Victorian fantasy come true.

by Make it Extreme

RoboticsWorkshop

difficulty
●●●●●
time
multi-week workshop build
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

This is a serious workshop showpiece, not a weekend kit. Make it Extreme bent a steel hoop 145 cm across, wrapped it in three motorcycle tires, mounted two electric motors inside, and rode it down real roads. The video is gorgeous and the fabrication is clean, but there is no CAD, no BOM, no wiring diagram, and no build guide. You are looking at inspiration, not instructions. The one thing most likely to go wrong is starting: you will need a welder, a tube bender, a lathe, motors and controllers you source yourself, and the skill to reverse-engineer the mechanical layout from the footage. If you have that workshop and those hours, this is a thrilling reference build. If you are looking for a file to print or a board to order, this is not it. The lack of battery specs also means you cannot plan cost or range before you commit.

GOOD TO KNOW

  • —No CAD files, no BOM, no circuit diagrams, no firmware — the project page shows the finished build and process photos only.
  • —makeitextreme.com lists it as project-0149 with brief specs: 145 cm diameter wheel, three 2.50-17 motorcycle tires for the tread, two motors with shared throttle, go-kart drive wheels, three black plastic guide rollers.
  • —No stated licence; no repository. This is a portfolio build, not a replicable how-to.
  • —Battery size, top speed and range are not published, so you cannot budget or plan performance.
  • —The creators state it is faster than their earlier gas-powered monowheel but give no numbers.

Parts to buy

10 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Two electric motors (unspecified model)Find
  • Two controllersFind
  • Go-kart drive wheelsFind
  • Three guide rollersFind
  • 145 cm steel hoop or tubeFind
  • Three 2.50-17 motorcycle tiresFind
  • SeatFind
  • ThrottleFind
  • Battery pack (size not stated)Find
  • Welding consumablesFind

Can I build this?

Printnothing required
Buytwo electric motors (unspecified model), two controllers, go-kart drive wheels, three guide rollers, 145 cm steel hoop or tube, three 2.50-17 motorcycle tires, seat, throttle, battery pack (size not stated), welding consumables
ToolsMIG or TIG welder, tube bender, lathe, drill press, angle grinder, hand tools, motor controller programming (if needed)
Skillsmetal fabrication, welding, machining, basic electronics and motor control — this is expert-level workshop work
Timeseveral weekends minimum, depending on fabrication speed and part sourcing
Cost$$$, dominated by motors, controllers, steel stock, tires and machining time; no published BOM so final cost is unknown
Safetymains voltage if charging at high current, lithium battery fire risk, road use without registration or testing, no mention of braking system or rollover protection — helmet required, closed roads recommended

This build involves mains voltage — for adults comfortable with electrical work only.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

Make it Extreme monowheel build

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the YouTube build video to see the fabrication process (No step-by-step guide, but you will see welding, bending and assembly)
  2. 2.Visit makeitextreme.com project-0149 for the brief spec list(Wheel diameter, tire size, motor count and roller count only)
  3. 3.Source two electric motors and controllers that can share one throttle signal(Models not specified — you will need to match torque and voltage yourself)
  4. 4.Acquire or fabricate a 145 cm steel hoop and plan the roller geometry(No dimensions given for the inner frame or roller spacing)

KNOWN ISSUES

  • No CAD, BOM or build guide — you are reverse-engineering the geometry and electronics from video footage alone.
  • Battery capacity and range are not published, so you cannot estimate ride time or plan cell count before buying.
  • No wiring diagram or controller settings — syncing two motors to one throttle without oscillation or runaway requires tuning.
  • The wheel is 145 cm tall and the seat is inside it, so ingress, egress and balance while stationary are not shown or explained.
  • No mention of a braking system, and stopping a heavy spinning wheel without locking or flipping forward is non-trivial.
  • Road legality is not addressed — most jurisdictions will not register a monowheel, so you are limited to private land or closed roads.

Is there a parts list or total cost?

No. The project page lists the wheel diameter, tire size and motor count but no part numbers, battery specs or budget.

How fast does it go?

Not stated. The creators say it is faster than their earlier gas monowheel but publish no speed, range or battery size.

Can I ride this on the street?

The video shows it on public roads, but legality depends on your jurisdiction. Most places will not register a monowheel, so plan for private land or closed events.

Do I need a lathe and welder?

Yes. The build involves bending a steel hoop, welding the frame, and machining roller mounts. This is not a bolt-together kit.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

Make it Extreme say this electric monowheel is faster than their gas version but publish no top speed, battery size or range. What would you want to know before starting a build like this?

CompareeTEAM10d ago

Practical notes from our verification: the project page is a portfolio piece with no CAD, BOM or wiring — just a spec list and the YouTube video. The wheel is 145 cm tall, wrapped in three motorcycle tires, and driven by two motors on one throttle, but the video does not show controller tuning, braking design or how to get in and out while stationary. The footage is inspiring but you are on your own for dimensions, parts and safety. If you have the workshop and the hours, this is a beautiful reference; if you need a guide, it is not here.

Make it Extreme

Make it Extreme is a workshop channel known for big fabrication builds. They built a gas-powered monowheel years earlier and say this electric one reaches a greater final speed, though no numbers are published.

Web

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.