TURN A PAINTING INTO A HIDDEN DESK WITH A FULL PC

A framed landscape painting on the wall folds down to reveal an ultrawide monitor, keyboard, and a complete working computer.

by DIY Perks

HomeDisplays

difficulty
●●●●●
time
several weekends
license
license not specified
repo
repo FINISHED
1
Jump to section

COMPAREE VERDICT

This is a spectacular piece of furniture engineering, but it is not a project you follow step-by-step. DIY Perks filmed the entire build and the video is detailed enough to learn from, but there are no dimensions, no templates, no wiring diagrams, and no model numbers. You will be designing your own version around whatever monitor and laptop board you find. The hardest part is not the woodworking or the electronics — it is engineering the hinge mechanism and the tensioned cord so the desk holds at exactly 90 degrees and does not sag under load. The laptop motherboard cooling is custom metalwork: a hand-fitted copper shim, a server heat sink, and a blower fan, and you will need to solve the boot issues he mentions. The wall power is low voltage DC delivered through copper tape painted to match the wall, which is clever and safe, but you still need a power brick somewhere and the system is capped at 90 watts so the tape stays cool. If you have advanced woodworking skills, can fabricate metal parts, and are comfortable reverse-engineering a build from video, this is a several-weekend project that will impress everyone who sees it. If you need a cut list and a BOM, this will waste your weekend.

GOOD TO KNOW

  • —This is a video-only build with no repository, no CAD files, no cut list, and no written instructions.
  • —The video shows the build process in detail but you will need to pause repeatedly and measure from the screen.
  • —There is no parts list — the monitor, keyboard, speakers, and laptop motherboard are shown but not model numbers given.
  • —The copper heat spreader is custom fabricated and requires metalworking tools not shown in detail.
  • —No licence because there are no released files.
  • —The video is the complete documentation and it is thorough, but this is a one-off show build, not a reproducible design.

Parts to buy

12 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Ultrawide monitor (bezel removed)Find
  • Laptop motherboard with working outputFind
  • KeyboardFind
  • MouseFind
  • SpeakersFind
  • Hardwood veneerFind
  • Copper sheet for heat spreaderFind
  • Server heat sinkFind
  • Laptop blower fanFind
  • Copper tapeFind
  • Non-stretch cordFind
  • Wall mounting hardwareFind

Can I build this?

Printnothing required
Buyultrawide monitor (bezel removed), laptop motherboard with working output, keyboard, mouse, speakers, hardwood veneer, copper sheet for heat spreader, server heat sink, laptop blower fan, copper tape, non-stretch cord, wall mounting hardware, magnets, basic electronics and DC power supply
Toolsfull woodworking shop, metalworking tools for custom copper shim, soldering iron, multimeter, drill, stud finder, paint and finishing supplies
Skillsadvanced woodworking (frame construction, veneer work, precise hinge mounting), metalworking (custom heat spreader fabrication), electronics (laptop motherboard integration, custom cooling, low voltage DC distribution), painting
Timeseveral weekends — the frame and desk mechanism alone is a weekend, the electronics and cooling another, finishing and painting a third
Cost$$$ — dominated by the ultrawide monitor, hardwood materials, and metalworking supplies; the laptop motherboard can be salvaged but the monitor cannot
Safetylow voltage DC only (under 90 watts), but you must mount securely into wall studs or the entire assembly can pull out under desk load; the copper tape trick is only for this low-voltage, max 90 W load

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

Building a NEW kind of invisible PC

This is the complete documentation — detailed footage of every step but no dimensions, templates, or parts list.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the full video at least twice before buying anything (You will need to pause and measure from the screen — there are no plans.)
  2. 2.Source a working laptop motherboard with video output you can test before building(The video mentions boot issues that had to be solved; test yours fully first.)
  3. 3.Choose your ultrawide monitor and measure the stripped panel dimensions(The frame and desk are sized around the monitor — this is the first fixed dimension.)
  4. 4.Design the hinge and cord tensioning system for your specific desk depth and monitor weight(This is the part most likely to fail if undersized — the cord must be non-stretch and the hinge strong enough to hold the desk under load.)

KNOWN ISSUES

  • The most common mistake is buying a laptop motherboard that does not boot reliably or has video output issues — test it fully on a bench before building it into the wall.
  • The desk must mount into wall studs, not drywall anchors, or it will pull out the first time you lean on it.
  • The copper heat spreader is hand-fabricated to fit the specific laptop CPU — you cannot skip this step or the system will thermal throttle or shut down.
  • The non-stretch cord that holds the desk at 90 degrees must be sized for the full desk load plus working weight — regular cord or rope will stretch and the desk will sag.
  • The copper tape power only works because the load stays at low DC voltage and a maximum of 90 watts — he says the tape never even gets warm at that load. Do not use it for mains voltage or a hungrier PC.
  • The keyboard and mouse are held by magnets — if you use wireless models with heavier batteries, the magnets may not hold or you may need stronger ones.

Can I use a mini PC instead of a laptop motherboard?

Yes, and it would be easier — no custom cooling required. The laptop board was chosen because it is thinner and fits the hidden aesthetic, but a small form factor PC would work and boot more reliably.

What ultrawide monitor did he use?

The video does not name the model. Choose any ultrawide you can afford, then design the frame around its stripped panel dimensions.

How much weight can the desk hold?

The video shows him leaning on it, but there is no rated load. The limiting factor is the hinge strength, the cord tension, and whether you hit wall studs. Size it for your own weight plus a laptop and a coffee mug, not a full tower PC.

Can this run Windows?

The video shows Linux Mint, but any operating system the laptop board supports should work — the OS is independent of the build.

Do I need to paint the landscape myself?

No — you can print a large canvas or buy a framed print. He painted it, but that is optional and has nothing to do with the functionality.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

The tensioned cord holds the desk at exactly 90 degrees and is strong enough to lean on — that is the part that separates a working desk from a sagging disappointment. What would you use for the cord, and how would you size it?

CompareeTEAM9d ago

Practical notes from our verification: this is a video-only build with no repository and no released files, so everything must be reverse-engineered from the footage. The video is thorough and shows every step, but there are no dimensions, no cut list, and no model numbers for the monitor or laptop board. The single hardest part is not shown in detail: fabricating the custom copper heat spreader to fit your specific laptop CPU, which requires metalworking tools and a fair amount of trial fitting. The wall power is clever (low voltage DC through painted-over copper tape) but you still need a power brick hidden somewhere, and the whole setup is capped at 90 watts, which is why the tape stays cool. If you have never done custom metalwork or advanced woodworking, start with a simpler hidden desk build first.

DIY Perks

DIY Perks is a YouTube channel known for high-end custom builds that blend electronics, metalworking, and furniture design. This project is a one-off show build demonstrating what is possible, not a repeatable kit.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.