TURN OLD LAPTOP BATTERIES INTO A HOME BATTERY THAT CHARGES AN EV
A 25 kWh home battery that charges an electric car, built from almost 2,800 sorted 18650 laptop cells.
by HBPowerwall
- difficulty
- ●●●●●
- time
- long-term project
- license
- license not specified
- repo
- repo
●●●●● · long-term project · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is a documented personal build, not a project you can download or copy. The creator collected about 3,000 18650 cells from used laptops, plus some bought from a battery reseller, sorted them by capacity in 50 mAh steps from 2,300 to 3,400 mAh, and built 14 packs of 193 cells each, almost 2,800 cells in total. Each pack was tested at 30 A and came out at 480 to 495 Ah, giving a 48 V, 25 kWh battery. He runs the cells only between 3.2 and 4 V, so he uses about 16 to 18 kWh, in exchange for a longer life. With a 5.5 kW inverter and solar panels it charges his MG electric car, and his previous laptop-cell battery lasted about four years. The appeal is clear: a 13.5 kWh Tesla Powerwall 3 costs about 15,400 dollars before incentives. The catch is just as clear: a lithium battery this big is a real fire risk without a proper BMS and fusing, and the mains connection must be done by a licensed electrician, as his was. Treat it as an inspiring example of how cell sorting and conservative voltage limits work, not as instructions.
IN THE REPO
GOOD TO KNOW
- —This is a YouTube build series, not a repository. There are no CAD files, no BOM, no firmware, and no written assembly guide.
- —The creator shows the process across multiple videos but does not provide plans you can follow step-by-step.
- —BMS setup and inverter integration are not documented, and this page does not cover them. That work needs qualified electrical input.
- —The grid connection was done by a licensed electrician. This is not something you wire yourself.
- —Some cells came from a battery reseller, not only from discarded laptops.
- —There is no licence because there is no repository. This is documentation of a personal build, not a released project.
Parts to buy
4 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
This build involves mains voltage — for adults comfortable with electrical work only.
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
HBPowerwall laptop cell battery build
Shows cell sorting in 50 mAh steps, pack assembly and 30 A testing of all 14 packs. A follow-up video (KgfykvHM95s) shows the old battery coming out, the new system on a 5.5 kW inverter with solar, and the car charging.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the build video and its follow-up (There is no written guide. The videos are your only source.)
- 2.Understand your local electrical code and whether a DIY battery bank is legal in your jurisdiction(A lithium battery this size tied into a home is a regulated electrical installation in many places. His mains connection was done by a licensed electrician.)
- 3.Understand why he sorted cells by capacity(He sorted cells in 50 mAh steps from 2,300 to 3,400 mAh and spread each group evenly across the 14 packs so every pack would be balanced. He says building this way takes quite a bit longer.)
- 4.Get qualified help with BMS, fusing and fire safety first(A 48 V, 25 kWh lithium battery is a real fire risk without a proper BMS and fusing. His system runs on a dedicated BMS with temperature sensors and a shunt trip, and an electrician did the mains side.)
KNOWN ISSUES
- There is no parts list or wiring diagram, and this page deliberately does not give one. It explains the principle, not the build.
- Testing and sorting thousands of cells by capacity takes a long time. The creator says building a battery this way takes quite a bit longer, in exchange for balanced, healthier packs.
- Laptop cells are not all created equal. Some will be near end-of-life even if they test well initially, and failures in a large parallel pack can cascade.
- The mains connection must be done by a licensed electrician, as his was. Rules for home batteries differ by country, so check them before anything else.
- Not all of his cells came from the bin: some were bought from a battery reseller. Do not count on getting thousands of usable cells for nothing.
- A BMS alone is not enough. You need fusing on every pack, thermal monitoring, and a plan for what happens if a cell goes into thermal runaway.
Can I really build this from old laptop batteries?
He did it, but it is not a matter of pulling cells and wiring them together. Every cell was tested and sorted by capacity, the packs were built so each one got an even mix of cells, and every pack was charge and discharge tested before use. The system runs with a proper BMS, and the mains connection was done by a licensed electrician. A lithium battery this size is a real fire risk, so this page explains the principle only and is not a build guide.
Is this safer than buying a commercial battery?
No. A commercial product like a Tesla Powerwall has safety certifications, thermal management, and a warranty. This is a DIY build with all the associated risks. If you do not understand lithium battery failure modes, do not attempt this.
How much does it actually cost?
The creator does not give a total cost. Not all cells were salvaged: some came from a battery reseller. On top of the cells there is the BMS, fusing, the 5.5 kW inverter (he mentions a price point of about 1,750 AUD), solar panels and the licensed electrician's work. For comparison, a 13.5 kWh Tesla Powerwall 3 costs about 15,400 USD before incentives.
Can I use this off-grid?
In the follow-up video the battery sits in a farm shed with solar panels and a 5.5 kW inverter, and he charges his MG electric car from it with no grid power present. The electrician installed the AC side, and the house connection was still unfinished in that video. How any system like this is configured depends on your inverter and local rules, and the mains side belongs to a licensed electrician.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
Almost 2,800 cells, sorted by hand in 50 mAh steps so every pack would be balanced — and the previous build lasted four years. What would stop you: the time to test cells, or the fire risk?
HBPowerwall
HBPowerwall documents personal home energy projects on YouTube and Instagram, including this 25 kWh battery built from recycled laptop cells. His previous laptop-cell battery, about 10 kWh, served him for about four years before this build took over.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM24d ago
Practical notes from our verification: this is a YouTube documentation of a personal build, not a project release, so there is no repository, no parts list and no step-by-step guide, and this page does not try to be one. The main video covers cell sorting, assembly and testing of all 14 packs; a follow-up video shows the old battery being retired and the new system charging his electric car. Two things matter most. First, some of the cells came from a battery reseller, not only from discarded laptops. Second, a lithium battery this size is a real fire risk: it needs a proper BMS and fusing, and the mains connection was done by a licensed electrician. Treat the videos as inspiration for the principle, not as something to copy.