BUILD A SEE-THROUGH JET ENGINE

A jet engine with a quartz glass casing, so you can watch the combustion chamber glow red hot while it runs.

by Skill Make

WorkshopScience

difficulty
●●●●●
time
50 days from design to finished parts
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

This is a remarkable piece of engineering theatre, not a weekend project or even a reproducible build. Skill Make spent 50 days designing and machining parts on a CNC mill and lathe, then assembled a working turbojet with a quartz glass casing so you can watch the combustion chamber glow above 700°C. The shaft is turned in one setup to stay balanced, ceramic bearings handle heat that would seize steel ones, and the nozzle guide vanes were laser-cut and welded on a 3D-printed jig. It runs on camping gas and lights with a spark plug after being spun up by a high-power blower. The first test failed when the turbine rubbed the housing; adjustments got it running. For context, small ready-made turbojets for RC planes start around 2,400 euros, so the appeal here is not cost but the spectacle of building one yourself. The single thing most likely to go wrong is attempting this without serious machining skills and safety discipline. The builder bought the Inconel turbine wheel ready-made, there are no CAD files or instructions, and he explicitly warns that the glass casing is dangerous. This is a video to watch and admire, not a guide to copy. If you have a lathe, a CNC mill, ceramic bearing suppliers on speed-dial and no interest in ever flying it, it is a magnificent way to spend two months. For everyone else, it is a reminder that some projects exist to show what is possible, not what is practical.

GOOD TO KNOW

  • —This is a YouTube build video, not a documented open-source project.
  • —No CAD files, bill of materials, or step-by-step instructions are published.
  • —The Inconel turbine wheel was bought ready-made from AliExpress.
  • —The builder himself says the glass casing is risky and he does not recommend it.
  • —No thrust measurements, no plans for this to power anything.
  • —The video shows fabrication and testing; it is not a guide someone can follow without machining experience and a full workshop.

Parts to buy

7 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Inconel turbine wheel from AliExpressFind
  • Quartz glass tubeFind
  • Ceramic ball bearingsFind
  • Aluminium and steel stockFind
  • Camping gas canistersFind
  • Spark plugFind
  • High-power blower to spin it upFind

Can I build this?

Print3D-printed jig for welding the nozzle guide vanes; otherwise nothing required
BuyInconel turbine wheel from AliExpress, quartz glass tube, ceramic ball bearings, aluminium and steel stock, camping gas canisters, spark plug, high-power blower to spin it up
ToolsCNC mill, lathe capable of turning steel in one setup, laser cutter for vanes, welding setup, high-temperature thermometer, workshop safety gear
SkillsExpert machining, welding, and workshop safety. This is not a beginner project by any measure.
Time50 days from design to finished parts, per the builder
Cost$$$, dominated by the CNC mill and lathe time, plus ceramic bearings and the Inconel turbine wheel
SafetyPressurised fuel, open flame, rotor at very high RPM, temperatures above 700°C, and a quartz glass casing the builder himself calls risky. For experienced workshop users only; the builder does not recommend the glass casing and this is not something to copy at home.

This build involves mains voltage — for adults comfortable with electrical work only.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

I Built a Homemade Fighter Jet Engine From Scratch (IT ACTUALLY WORKS)

The complete build and test. Steel shaft machined at 8:10, ceramic bearings at 8:36, NGV welding at 9:23, glass casing and risk warning at 11:34-11:39, 50-day timeline at 12:04, turbine wheel from AliExpress at 12:23, first failed test and spark plug at 12:51, successful firing at 14:24-15:39, thermometer readings 614-731°C visible on screen around 15:30-15:42.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the video (The only published record of this build. There are no CAD files or written instructions.)
  2. 2.Do not attempt this without serious machining experience(The builder warns against copying the glass casing. Pressurised fuel, open flame, and a rotor at very high RPM make this a project for people who know exactly what they are doing.)

KNOWN ISSUES

  • This is not a documented open-source project. There are no CAD files, no BOM, no step-by-step guide. Watching the video will not give you enough to replicate it unless you already know how to design turbomachinery.
  • The Inconel turbine wheel was bought ready-made. You cannot machine one yourself without specialist tooling, and the video does not name the AliExpress seller or part number.
  • It needs a high-power blower to spin up. It will not self-start. No thrust measurements exist, so this will not power anything.
  • The builder himself says the quartz glass casing is risky and he does not recommend it. That warning is at 11:39 in the video and it is not a throwaway line.
  • Ceramic ball bearings are specialist parts, not hardware-store bearings. Budget for them.
  • The first test failed because the turbine rubbed the housing. Tolerances are tight and there is no room for approximation. If you do not have a lathe that can turn a balanced steel shaft in one setup, stop here.

Are there CAD files or a BOM?

No. This is a YouTube build video, not a documented open-source project. You get to watch it being made, but there are no files to download.

Can I build the turbine wheel myself?

The builder bought the Inconel turbine wheel ready-made from AliExpress. Machining one yourself is not realistic without specialist equipment.

Is the glass casing safe?

The builder says it is risky and he does not recommend it. That is at 11:39 in the video. The engine runs above 700°C with pressurised fuel and a rotor at very high RPM. Take the warning seriously.

Does it produce thrust? Can it power an RC plane?

No thrust measurements exist. It needs a blower to start and the video does not show it powering anything. This is a bench demonstration, not a propulsion system.

How much does it cost compared to a ready-made turbojet?

Small ready-made turbojets for RC planes start around 2,400 euros. This build cost is not broken down, but 50 days of CNC mill and lathe time plus ceramic bearings and the Inconel wheel will not come cheap. The appeal is the spectacle of building one, not saving money.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

The thermometer hit 731°C and the builder himself says the glass casing is risky — but 2.5 million people have watched it glow. If you had the workshop and the time, would you build one, or is this purely a spectator project?

CompareeTEAM15d ago

Practical notes from our verification: this is a video-only project with no published files, so replication depends entirely on your ability to reverse-engineer from footage and your existing machining skill. The builder warns against the glass casing at 11:39 and that is not a casual disclaimer — pressurised fuel, open flame, 700°C+ temps, and a rotor at very high RPM make this genuinely dangerous if you get it wrong. The Inconel turbine wheel was bought ready-made from AliExpress (mentioned at 12:23) but the seller and part number are not given. No thrust measurements exist yet (he says that comes in a later video), and it needed a blower to spin it up. The appeal is watching something impossible become real in your own workshop, not building a practical engine. If you do not already own a CNC mill, a lathe, and ceramic bearing suppliers on speed-dial, this is a project to admire from a distance.

Skill Make

A YouTube maker who builds ambitious machining projects and shares the process in long-form videos.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.