TURN A BROKEN 2-TON FACTORY ROBOT INTO A CNC MILL

A 2-ton industrial welding robot from the Eurostar train factory, brought back from fatal errors and recalibrated to repeat a move within 0.016 mm.

by Brian Brocken

WorkshopRobotics

difficulty
●●●●●
time
months
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

Brian Brocken took a 1999 ABB IRB 6400 welding robot that threw fatal errors on startup and turned it into a CNC mill. He replaced the robot computer, reinstalled RobotWare 3.1, recalibrated six axes after the backup battery died, and wrote software to stream milling commands over a serial line because the controller holds only about 15,000 lines of code. In dial gauge testing it repeated a position within 0.016 mm. The finale is a Tesla Roadster wheel carved out of foam. This is a documentation project, not a build guide. There are no STL files, no firmware repository, and the Rapid2Serial software is sold, not shared. The robot mills foam and wood, not metal, and a 2-ton industrial robot arm can kill if something goes wrong during homing or calibration. This is for someone who already knows industrial robot programming, has space for a 2-ton machine, and understands the safety systems. If you are looking for a CNC mill to build in a weekend, this is not it. If you want to see what it takes to bring a dead factory robot back and you have months to spare, the Hackaday project log is the place to start.

GOOD TO KNOW

  • —Build log published on Hackaday.io with photos and troubleshooting notes.
  • —No repository, STL files, firmware source, or BOM.
  • —Rapid2Serial software for streaming G-code is sold separately on the creator's website, not open source.
  • —Materials are foam and wood, not metal — the robot's repeatability is high but the application is soft materials.
  • —Licence not stated.
  • —This is a documentation project of a one-off industrial conversion, not a reproducible weekend build.

Parts to buy

5 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Scrapped ABB IRB 6400 robot (or similar industrial arm)Find
  • Replacement controller if the original is deadFind
  • RobotWare softwareFind
  • Spindle and motor mount hardwareFind
  • Rapid2Serial software from the creator's siteFind

Can I build this?

Printnothing required
Buya scrapped ABB IRB 6400 robot (or similar industrial arm), replacement controller if the original is dead, RobotWare software, spindle and motor mount hardware, Rapid2Serial software from the creator's site
Toolsserial interface, dial gauge for calibration, industrial robot programming knowledge, a space that can safely house a 2-ton arm
Skillsindustrial robot programming, axis calibration, serial communication, understanding of robot safety systems — this is not an entry-level project
Timemonths — troubleshooting the controller, recalibrating axes, writing or configuring the streaming software, and testing moves all take serious calendar time
Cost$$$, dominated by the robot itself (even scrapped), controller replacement if needed, and the Rapid2Serial software
SafetyA 2-ton industrial robot arm can crush or strike with lethal force if homing fails or an axis moves unexpectedly. Work inside the safety perimeter only when the arm is powered off. Understand the emergency stop system before you start.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

Turning a broken 2 ton robot into a CNC-machine | ABB IRB6400

No speech, 521k views, shows the error codes, controller swap, axis recalibration, dial gauge test at 0.016 mm repeatability, and the foam Tesla wheel carve.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Read the Hackaday.io build log (The only public documentation — photos, troubleshooting notes, and context on the controller swap and recalibration.)
  2. 2.Watch the YouTube video (No speech, but shows the error screens, the axis moves, and the final foam carve.)
  3. 3.Check the Rapid2Serial software(Sold on bbprojects.technology — required to stream G-code into the limited controller memory.)

Resources

Documentation, files and community threads for this build — we link straight to the original sources and never rehost the creator’s files.

KNOWN ISSUES

  • Buying an industrial robot without understanding the safety systems — these machines can kill, and a dead controller does not mean the arm is safe to touch.
  • Expecting metal machining — this setup mills foam and wood, not aluminium or steel.
  • Assuming the software is included — Rapid2Serial is sold separately, not open source.
  • Underestimating space and weight: the IRB 6400 weighs about 2 tons and needs a solid floor and a safe working zone around it.
  • Not having a backup plan for the controller — if the original controller is unrecoverable, sourcing and installing a replacement is a project in itself.
  • Thinking this is a weekend build — months is realistic for someone who has never worked with industrial robots before.

Can this robot mill metal?

Not in this configuration. The repeatability is there (0.016 mm), but the spindle and tooling shown are for foam and wood, and the creator has not demonstrated metal cuts.

Is the Rapid2Serial software open source?

No. It is sold on the creator's website. Without it, you are limited to the roughly 15,000 lines the controller can hold in memory.

Where do I get RobotWare 3.1?

RobotWare is ABB's proprietary software for their robots. Version 3.1 is decades old; sourcing it may require contacting ABB or the used industrial automation community.

What does a used ABB IRB 6400 cost?

Brian hasn't said what he paid. Used IRB 6400 units are listed on resale.info for roughly 7,000 to 9,500 euros, plus transport for a 2-ton machine.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

This 2-ton welding robot now repeats a move within 0.016 mm, but it mills foam and wood, not metal. If you had a retired factory arm in your garage, what would you make it do?

CompareeTEAM1d ago

Practical notes from our verification: the Hackaday.io log is live and has photos of the error codes and axis calibration, but there is no repository and the Rapid2Serial software that makes the whole thing work is sold on bbprojects.technology, not shared. The YouTube video has 521k views and no speech, just the robot moving and the foam carve at the end. The single biggest thing to know before you start hunting for a scrapped robot: this is months of troubleshooting and calibration work, not a weekend, and a 2-ton arm that moves unexpectedly can kill. The creator's Instagram is @bribro_12.

Brian Brocken

Brian Brocken runs BB Projects and builds with robots and CNC machines. He brought this 1999 ABB welding robot back from a fatal error and wrote his own software to stream milling code into its tiny controller memory.

Web

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.