TURN A PS5 INTO THE PORTABLE PLAYSTATION SONY NEVER MADE

Turn a redesigned PS5 into a tablet thinner than the Slim, with a 4K OLED screen salvaged from a broken laptop.

by DIY Perks (Matt)

DisplaysOpen-hardware

difficulty
●●●●●
time
multiple weekends
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

This is a one-off demonstration build by Matt from DIY Perks, not a project you can follow step-by-step. The video shows the approach, but there are no CAD files, no part numbers, no cut list, and no assembly guide. You would be reverse-engineering from video frames. The cooling is the real challenge: the PS5 chip makes almost 200 watts of heat, his first attempt overheated past 60 degrees C, and the working version needed two custom heatsinks with heat pipes, liquid metal, and high-end bidirectional laptop fans. He nickel-plated the copper block himself in vinegar and salt. The screen is a 4K OLED panel salvaged from a broken laptop, so you need to source one that matches or design around what you find. The 3D-printed shell is two-tone with aluminium trim, but the models are not released. The most likely thing to go wrong is thermal: if you guess the heatsink sizing or the fan curve, the console will throttle or shut down, and liquid metal is unforgiving if it bridges contacts. This is a weekend project only if your weekend includes custom metalwork, electroplating, and writing your own thermal model.

GOOD TO KNOW

  • —No repository, no files, no bill of materials, no STL models, no written instructions.
  • —The build is documented in an 18-minute YouTube video by DIY Perks (January 2024, 8.8 million views).
  • —You need a redesigned PS5 motherboard, a 4K OLED laptop panel, custom heatsinks with heat pipes, high-end laptop fans and a 12 V power supply.
  • —Opening a PS5 voids its warranty immediately.
  • —No licence applies because this is a demonstration build, not a released design.
  • —No battery: the tablet runs from a 12 V mains supply on a cable.

Parts to buy

11 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Redesigned PS5 motherboardFind
  • Salvaged 4K OLED laptop panelFind
  • Copper and nickel for electroplatingFind
  • Two heatsinks with heat pipesFind
  • High-end laptop fans (bidirectional)Find
  • 12 V GaN power supplyFind
  • Carbon fibre sheetFind
  • Aluminium trimFind
  • Stereo speakersFind
  • Dual 5 W subwoofer driversFind
  • Assorted fastenersFind

Can I build this?

PrintShell and internal brackets — models not released, you would design them yourself or work from video stills.
BuyRedesigned PS5 motherboard, salvaged 4K OLED laptop panel, copper and nickel for electroplating, two heatsinks with heat pipes, high-end laptop fans (bidirectional), 12 V GaN power supply, carbon fibre sheet, aluminium trim, stereo speakers, dual 5 W subwoofer drivers, assorted fasteners.
ToolsElectroplating setup (vinegar, salt, nickel strips, power supply), thermal camera (or be ready to guess), multimeter, soldering iron, 3D printer, metalworking tools for custom heatsinks.
SkillsAdvanced. You are working with liquid metal on a 200-watt chip, designing cooling from scratch, and sourcing parts with no BOM. This is not a learn-as-you-go build.
TimeMultiple weekends if you know what you are doing.
CostNot stated in the video. A redesigned PS5 is the biggest cost, plus the OLED panel, heat pipes, laptop fans and a 12 V GaN supply.
SafetyOpening the PS5 voids its warranty. Liquid metal is conductive and can kill the board if it bridges contacts. The 12 V GaN supply plugs into mains, so treat it like any power brick, and the chip runs hot under load.

This build involves mains voltage — for adults comfortable with electrical work only.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

DIY Perks – world's first PlayStation 5 tablet edition18:10

18-minute build showcase, not a tutorial. Shows the approach, electroplating process, thermal testing with a thermal camera, and final assembly.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the full DIY Perks video (Take notes on every part you can identify. Pause on the heatsink frames and the OLED panel model.)
  2. 2.Source a redesigned PS5 motherboard(He used a redesigned PS5, whose motherboard is much smaller. Opening a retail PS5 voids its warranty.)
  3. 3.Find a 4K OLED laptop panel(He used a panel from a broken laptop. You need to match the size and design your shell around it.)
  4. 4.Design or buy custom heatsinks(Two heatsinks with heat pipes. His first attempt with mini fans overheated; you need high-end laptop fans.)

KNOWN ISSUES

  • There are no files, no BOM, no part numbers. You are reverse-engineering from a video.
  • His first cooling attempt overheated and shut down. Plan to test and iterate, ideally with a thermal camera like he did.
  • Liquid metal is conductive. If it bridges contacts on the PS5 chip, the board is dead.
  • The OLED panel is salvaged. You need to find one that matches or redesign the shell around what you have.
  • Opening a PS5 voids its warranty immediately, and the motherboard is expensive to replace.
  • No battery: this tablet only works plugged into mains power on a cable.

Can I use a regular PS5 motherboard?

He used the motherboard from a redesigned PS5, which is much smaller than the launch model's. The video does not try a launch board.

Why did his first cooling design fail?

The mini fans could not move enough air. The chip hit over 60 degrees C and shut down. He replaced them with high-end bidirectional laptop fans and added a second heatsink.

Do I need to nickel-plate the copper block?

He did it because liquid metal slowly absorbs into raw copper. Sony nickel plates the base of its own heatsink for the same reason.

Can I add a battery?

He did not add one. It runs from a 12 V gallium nitride power supply on a cable.

Will this void my PS5 warranty?

Yes, immediately. Opening the console voids the warranty.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

The chip makes almost 200 watts of heat, his first fans overheated, and the working version needed two custom heatsinks with high-end laptop fans. How would you approach the cooling differently?

CompareeTEAM1mo ago

Practical notes from our verification: this is a showcase build, not a released project. There is no repository, no files, no BOM, and no written guide. The video is from January 2024 and has 8.8 million views, but it is a demonstration of what is possible, not a weekend tutorial. The single biggest trap is the cooling: his first attempt failed, and you would need a thermal camera or multiple prototypes to get it right. The OLED panel is salvaged from a broken laptop, so you need to design around what you find. Opening a PS5 voids its warranty, and the motherboard is expensive to replace if the liquid metal bridges a contact.

DIY Perks (Matt)

Matt runs DIY Perks. He points out that Sony hasn't released a portable console in over 10 years, and that the PlayStation Portal doesn't count because it only streams from a full PS5.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.