
BUILD YOUR OWN POCKET CAMERA
A fully 3D-printed digital camera that fits in your pocket, boots in 5 seconds, and sends photos to your phone over its own Wi-Fi hotspot.
Built withRaspberry Pi3D printing
- difficulty
- ●●●○○
- time
- a weekend
- license
- CC-BY-SA-4.0
- repo
- repo ACTIVE911 stars
●●●○○ · a weekend · CC-BY-SA-4.0 · 911 stars · repo ACTIVE
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
Optocam Zero is a Raspberry Pi Zero 2 W camera in a fully 3D-printed PETG case that fits in your pocket (51×71×18 mm). It boots in 5 seconds, shoots 2592×2592 JPEG images, has 8 built-in filters plus custom filter support, and sends photos to your phone or computer over a Wi-Fi hotspot. The repository is complete: print-ready 3MF files, STEP CAD for customization, a detailed PDF build guide, and firmware. The BOM is all off-the-shelf Raspberry Pi parts (Zero 2 W, Camera Module 3, Waveshare HATs), plus a swappable 14500 lithium battery and USB-C charging. The build guide is clear and includes assembly photos. The one thing most likely to frustrate someone is battery life: 70–80 minutes is enough for a walk but not a full day, and the toy-camera image quality is deliberate — this is not a replacement for a phone camera, it is a playful pocket camera in the spirit of the Kodak Charmera. If you want something with that aesthetic and the satisfaction of building it yourself, this is exactly that. If you need professional image quality or all-day battery, look elsewhere.
IN THE REPO
GOOD TO KNOW
- —Complete repository: STL files, print-ready 3MF files, STEP CAD, bill of materials, firmware (buildroot and legacy Python), and a PDF build guide.
- —Licence is CC BY-SA 4.0, which permits commercial use but requires attribution and share-alike.
- —Uses off-the-shelf Raspberry Pi components: Pi Zero 2 W, Camera Module 3 with autofocus, Waveshare battery HAT, Waveshare LCD HAT.
- —Battery life is 70–80 minutes per charge with a 14500 lithium-ion cell.
- —Image quality is toy-camera style (inspired by Kodak Charmera), not professional-grade.
Parts to buy
7 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Read the build guide PDF (Detailed step-by-step assembly with photos. Start here to understand what the build involves.)
- 2.Check the bill of materials (Full parts list with exact model numbers for Raspberry Pi components and Waveshare HATs.)
- 3.Download print-ready 3MF files (Bambu Studio project files for transparent PETG or opaque PETG/PETG-CF. Use individual STLs if you prefer another slicer.)
- 4.Set up the firmware (Buildroot-based firmware for 5-second boot. Follow the README for flashing to microSD.)
Resources
Documentation, files and community threads for this build — we link straight to the original sources and never rehost the creator’s files.
KNOWN ISSUES
- Buying the wrong Waveshare HAT: you need the specific 240×240 LCD HAT and the matching battery HAT. The BOM lists exact part numbers — double-check before ordering.
- Battery life expectation: 70–80 minutes is real, not a worst-case. If you want to shoot all day, carry a spare 14500 cell or a USB power bank.
- Print orientation and support: the 3MF files have this sorted, but if you slice the STLs yourself, some parts need careful support placement (especially the joystick button and case halves).
- Image quality is toy-camera style by design. If you expect phone-quality autofocus and low-light performance, this will disappoint — it is deliberately playful, not technical.
- Firmware setup is not plug-and-play: you flash a custom buildroot image to the SD card. If you have never done this, budget time to read the instructions and troubleshoot the first boot.
- The 14500 lithium battery must be a protected cell. An unprotected cell can fail dangerously if the discharge protection in the HAT does not engage.
What image quality should I expect?
Toy-camera quality, inspired by the Kodak Charmera. It shoots 2592×2592 JPEGs with autofocus and filters, but it is not trying to replace your phone camera — it is deliberately playful and fun.
How do I get photos off the camera?
The camera creates its own Wi-Fi hotspot. You connect your phone or computer to it and use a web interface to browse and download photos. No app needed.
Can I use a different Raspberry Pi board?
The case is designed specifically for the Pi Zero 2 W and the two Waveshare HATs. A different board would not fit, and the firmware is tuned for the Zero 2 W's performance.
How long does the battery last?
70–80 minutes per charge with a 14500 lithium-ion cell. You can swap the battery without tools (the battery door is part of the case), so carrying a spare extends shooting time.
Can I modify the design?
Yes. The STEP CAD files are in the repository, and the licence is CC BY-SA 4.0, so you can remix and share modifications as long as you credit the original and share-alike.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
70–80 minutes of battery life is tight for a full afternoon, but the battery door is tool-free and swapping a spare 14500 cell takes seconds. Would you carry a spare, or just shoot in short bursts and recharge?
Doruk Kumkumoğlu
Doruk designed Optocam Zero as a compact, carry-everywhere camera inspired by toy cameras like the Kodak Charmera. The goal was to make it playful, intuitive, and buildable by others using off-the-shelf components and 3D-printed parts.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM11d ago
Practical notes from our verification: the repository is complete — STLs, 3MF files, STEP CAD, BOM, firmware, and a detailed PDF build guide are all present. The firmware moved from a Python-based system to a buildroot image that boots in 5 seconds, which is a significant upgrade (the old Python version is still in the repo under software/python-legacy). There is no official video walkthrough, but the build guide has photos for every step. The single biggest cost is the Raspberry Pi Camera Module 3 with autofocus. If you want to save money, you could use the older Camera Module 2 without autofocus, but you would lose the main feature that sets this apart from earlier Pi camera projects.