GIVE A LAPTOP WITH A BROKEN KEYBOARD A REAL MECHANICAL KEYBOARD

After his Lenovo Yoga keyboard broke for the second time, Marcin Plaza designed a new metal case thick enough to fit a low-profile mechanical keyboard and an integrated USB-C hub.

by Marcin Plaza

WorkshopOpen-hardware

difficulty
●●●●●
time
a weekend-plus
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

This is a dramatic rebuild of a specific laptop that broke twice, not a weekend kit. Marcin Plaza designed a new main enclosure from bent sheet metal to fit a low-profile mechanical keyboard and a USB-C hub into a Lenovo Yoga 730-13IKB. The result is thicker than the original and the CAD files are shared under CC BY-SA, but there is no parts list, no assembly guide, and Marcin himself says the parts were not ready to assemble — he drilled holes and added screws after receiving the metal work. The single biggest trap is treating this as a recipe: it is a case study. You will need to measure your own laptop, source a compatible keyboard and hub, modify the CAD to fit, find a sheet metal shop (PCBWay sponsored his), and solve the mounting yourself. If your laptop keyboard has failed and you want a mechanical replacement badly enough to design and fabricate a custom case, this shows it can be done. If you want instructions, there are none.

GOOD TO KNOW

  • —CAD files are provided: OnShape link plus STEP files for top plate, midplate, and bottom plate.
  • —No bill of materials, no assembly instructions, no list of which keyboard or hub to buy.
  • —The parts were not ready to assemble — Marcin drilled holes and added screws afterwards and says he does not recommend replicating this exact project.
  • —The sheet metal fabrication was sponsored by PCBWay; you will pay full price.
  • —Licence is CC BY-SA, which permits commercial use with attribution.
  • —This is a one-off rebuild for a specific laptop model (Lenovo Yoga 730-13IKB), not a universal design.

Parts to buy

4 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Sheet metal fabrication (top, mid, bottom plates)Find
  • Low-profile mechanical keyboard that fits the new caseFind
  • USB-C hubFind
  • Screws and fastenersFind

Can I build this?

Printnothing required — the enclosure is bent sheet metal
Buysheet metal fabrication (top, mid, bottom plates), a low-profile mechanical keyboard that fits the new case, a USB-C hub, screws and fasteners, your specific laptop
ToolsCAD software to modify the OnShape design for your laptop, access to a sheet metal shop or online fabrication service, drill, screwdriver, patience
SkillsCAD design, measuring and fitting parts into a laptop chassis, drilling and tapping holes in sheet metal, disassembling and reassembling a laptop without breaking the screen hinge
Timea weekend-plus if you already know CAD and have done laptop rebuilds; a week if this is your first custom enclosure
Cost$$$ — sheet metal fabrication for three custom parts is the largest cost, plus the keyboard and hub
SafetyLithium battery inside the laptop; disconnect it before working. Sharp edges on cut sheet metal. No mains voltage unless you open the laptop power supply, which you should not.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

I Put a Mechanical Keyboard INSIDE My Laptop

Full build video from July 2024, about 952k views

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the full build video to see what you are getting into
  2. 2.Download the STEP files from the PCBWay project page (top, mid, and bottom plates)
  3. 3.Measure your laptop and keyboard, then modify the CAD to fit(the OnShape link is on the PCBWay page)
  4. 4.Get quotes from sheet metal shops or upload to PCBWay(expect to iterate on hole placement)

Resources

Documentation, files and community threads for this build — we link straight to the original sources and never rehost the creator’s files.

KNOWN ISSUES

  • The parts were not ready to assemble — Marcin drilled holes and added screws afterwards, so you will need to do the same or redesign the CAD.
  • This design is for a Lenovo Yoga 730-13IKB; your laptop will have different dimensions, mounting points, and I/O placement.
  • There is no parts list for the keyboard, hub, or fasteners — you will need to source components that fit the space you have.
  • Sheet metal fabrication is expensive and slow; budget for at least one round of revisions when holes do not line up.
  • The laptop ends up thicker than the original, which may not fit in your bag.
  • Disassembling a laptop without breaking the screen hinge or ribbon cables takes practice; watch a teardown video for your specific model first.

Will this work on my laptop?

No, not as-is. The CAD is for a Lenovo Yoga 730-13IKB. You will need to measure your laptop and redesign the enclosure to fit.

What keyboard did he use?

The project page does not say. You need a low-profile mechanical keyboard that fits the space between the screen and the bottom plate.

How much does the sheet metal cost?

PCBWay sponsored Marcin's parts. Expect to pay for three custom bent-metal parts plus shipping; get a quote before committing.

Is there a step-by-step guide?

No. The video shows the process but not in assembly-manual detail. You will need to reverse-engineer some steps.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

Marcin drilled holes and added screws after the metal parts arrived, and says he does not recommend copying this exactly. If you were rebuilding a broken laptop, would you go for sheet metal or try 3D printing the case instead?

CompareeTEAM1mo ago

Practical notes from our verification: there is no repo, no parts list, and no assembly manual — just the CAD files and the video. The PCBWay project page is live and has the STEP files under CC BY-SA. The video is the only documentation, and it is a walkthrough of what Marcin did, not a step-by-step you can follow without pausing constantly. The single biggest cost is the sheet metal fabrication; PCBWay sponsored his build, but you will pay retail. If you have never designed a custom laptop enclosure before, expect this to take longer than a weekend.

Marcin Plaza

Marcin Plaza is a YouTube maker known for hardware rebuilds like a 12-monitor video wall made from monitors an office threw out. After his Lenovo Yoga keyboard broke for the second time, he designed a new metal case thick enough to fit a mechanical keyboard and shared the CAD files.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.