BUILD A ROBOT THAT TIDIES YOUR WORKBENCH WHEN YOU ASK

A 17-foot robot on the wall that fetches bins and tidies your bench when you ask out loud.

by Jay (Engineezy)

WorkshopRobotics

Built withESP32

difficulty
●●●●●
time
many weekends
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

StuBot is a show-and-tell project, not a buildable kit. There are no public files, code, drawings or parts list. What you get is a 17-minute video that walks through every stage: CNC-cut MDF panels with six linear rails anchored to the wall, 25 printed helical rack segments driving the long axis, a 1200 mm ball screw on the Z carriage, an ESP32 running three stepper drivers, and a servo gripper with rubber pads. Jay says it reached 1 mm accuracy, and it is strong enough for him to hang from. A database maps every bin and links to his smart speaker, so he can ask for specific screws, call up all the bins for a project, put them away, or run a tool-tidying routine. The tools have to sit in pre-programmed spots, and he says it still needs to get faster and truly automatic. Treat it as a reference design to build your own version from, not instructions to follow.

GOOD TO KNOW

  • —No public build files, CAD, firmware or BOM exist for StuBot.
  • —The entire project is documented in a single 17-minute YouTube video with timestamps for each build stage.
  • —CNC-cut MDF backplates, 25 3D-printed helical rack segments, aluminium extrusion Y-axis, 1200 mm ball screw Z-axis, six linear rails, ESP32 controller, three stepper drivers, servo gripper.
  • —A database maps bin locations and connects to a smart speaker for voice commands.
  • —Tools must sit in pre-programmed spots; the system is not fully automatic yet.
  • —The creator is Jay from Engineezy; the video is sponsored by Bambu Lab and he does not mention plans to release files.

Parts to buy

12 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Six linear rails (length not specified)Find
  • 1200 mm ball screwFind
  • Three stepper motors (models not specified)Find
  • CNC controller with three stepper driversFind
  • Power supplyFind
  • ESP32Find
  • Servo for gripperFind
  • Drag chainFind
  • MDF sheet stockFind
  • Aluminium extrusion (length not specified)Find
  • FastenersFind
  • Concrete anchorsFind

Can I build this?

Print25 helical rack segments, Y-axis corner joints, gripper, bin landing zone with 8 bays, and any mounting brackets you design — there are no public STL files
Buysix linear rails (length not specified), 1200 mm ball screw, three stepper motors (models not specified), CNC controller with three stepper drivers, power supply, ESP32, servo for gripper, drag chain, MDF sheet stock, aluminium extrusion (length not specified), fasteners, concrete anchors, smart speaker
ToolsCNC router for MDF panels, 3D printer (large build volume for rack segments), drill, concrete drill and anchors, soldering iron, crimpers, software development environment for ESP32, database setup, smart speaker integration (method not documented)
SkillsCNC operation, large-format 3D printing, embedded programming (ESP32, stepper control, homing), database design, API integration for voice commands, mechanical assembly, concrete anchoring, electrical wiring, CAD design (you will reverse-engineer everything)
Timemany weekends — CNC work, 25 rack segments to print, frame assembly, wiring, firmware from scratch, database and voice integration, calibration and tuning
Cost$$$ — six long linear rails, a 1200 mm ball screw, large steppers, CNC time for MDF, metres of aluminium extrusion, and filament for 25 rack segments and all the printed parts
SafetyMains voltage in the power supply and CNC controller. A heavy gantry moving at speed on a 17-foot rail bolted to a wall — ensure wall anchors are rated for dynamic loads and the concrete is sound. The video shows him hanging from the carriage as a strength test, but do not do that until you are certain the rail mounts and motor can take it.

This build involves mains voltage — for adults comfortable with electrical work only.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

I HATE Cleaning so I built THIS17:21

Complete build walkthrough with timestamps for every stage. Video is sponsored by Bambu Lab. No mention of releasing files.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the full video at 0:40 to see the gantry concept and decide if you want to reverse-engineer it (No files exist; this is design-from-scratch territory.)
  2. 2.Measure your workbench and wall to see if a gantry this size will fit(StuBot spans 17 feet — your wall anchors and concrete must support a moving load.)
  3. 3.Draft a parts list by pausing the video at 2:00 (rails), 5:05 (rack), 6:27 (axes), 8:42 (electronics) and 10:09 (gripper)(Part numbers and exact lengths are not given; you will guess or design around what you can buy.)

KNOWN ISSUES

  • There are no STL files, no Gerber files, no firmware, no BOM, no CAD and no build guide. The video is the only documentation and it does not give part numbers, dimensions or code. You will design everything from scratch.
  • The long axis runs on 25 printed helical rack segments that have to mesh along all 17 feet. He oriented the teeth downward to keep dust out.
  • The voice integration and bin database are entirely custom. The video shows it working but does not explain the backend, the API or how the smart speaker connects to the ESP32. You will write all of that.
  • Anchoring a 17-foot gantry into a wall requires concrete that can take dynamic loads. If your wall is drywall over studs, or if the concrete is shallow or cracked, the entire frame will sag or pull free when the carriage moves.
  • Jay says tools must sit in pre-programmed spots and the system is not fully automatic yet. You will spend significant time mapping bin positions, tuning homing switches and writing routines for every tool.

Are there STL files or firmware I can download?

No. StuBot has no public build files, code or documentation beyond the YouTube video.

How much did it cost?

The video does not give a total. Six long linear rails, a 1200 mm ball screw, large stepper motors, metres of aluminium extrusion, CNC time for MDF and filament for 25 rack segments will push this into the $$$ band.

What microcontroller and stepper drivers does it use?

An ESP32 and a CNC controller with three stepper drivers. The video does not name the board or driver models.

Can it tidy any mess on the bench?

No. Tools must sit in pre-programmed spots. The robot fetches bins from known locations and runs a tool-tidying routine for tools that are always in the same place.

How does the smart speaker integration work?

He says a database maps every bin location and the system is connected to his smart speaker. The video does not show how that part works, so you would build it yourself.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

StuBot spans 17 feet and fetches bins by voice command, but there are no public files and the voice integration is entirely custom. If you were building your own version from scratch, would you use an ESP32 or move to something with more memory for the database and API work?

CompareeTEAM1mo ago

Practical notes from our verification: the YouTube video (703k views, 5 Dec 2025) is the only source — there is no repo, no project page, no STL files, no firmware and no BOM. The Instagram handle is @engineezy_ and the website is engineezy.com, but neither link to build files. The video is sponsored by Bambu Lab and Jay does not mention releasing anything. The single biggest trap is thinking you can download files and start printing; you cannot. This is a show-and-tell project that will take months to replicate because you will reverse-engineer dimensions, part specs and all the code from 17 minutes of video. The voice integration and bin database are black boxes. If you have the time and the CNC, it is an inspiring reference build. If you want something you can finish, it is not that.

Jay (Engineezy)

Jay runs Engineezy, a YouTube channel and Instagram account documenting workshop builds and engineering projects. He built StuBot to avoid tidying his 17-foot workbench manually. The video is sponsored by Bambu Lab and he does not mention plans to release the files.

Web

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.