TURN A CHEAP PLASMA GLOBE INTO A BALL THAT SHOOTS LIGHTNING

Cheap eBay plasma globes can barely light a match; this one throws two-foot arcs straight out of the glass.

by styropyro (Drake)

WorkshopScience

difficulty
●●●●●
time
no total build time given in the video
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

This is a demonstration of what happened when styropyro (Drake) replaced a cheap plasma globe's tiny driver with a multi-kilowatt Tesla coil. The stock globe barely lit a match. The new driver draws 350 times as much power, raised the frequency from 23 kHz to 265 kHz, and with aluminum foil on top shoots an arc two feet out of the glass. It also lit fluorescent tubes wirelessly and popped balloons, all at only half the power it was built for. The power supply was built from transformers salvaged from microwave ovens, which he says give about 10,000 volts, and drives a homemade Tesla coil with a rotary spark gap. This page describes what he did; it is not a build guide, and none exists. The video has no schematics, no safety procedure and no design files. The creator warns that microwave oven parts can kill and that you should not try this at home. Watch it as a spectacle, not as instructions.

GOOD TO KNOW

  • —This is a YouTube demo video from 2018, not a build guide or repository.
  • —No CAD files, no BOM, no schematics, no step-by-step instructions.
  • —The creator explicitly says you would probably die trying this at home and that microwave transformers are lethal.
  • —The video shows the finished machine (a power supply built from microwave oven transformers driving a Tesla coil with a rotary spark gap) but not how to replicate it, and the creator says not to try.
  • —No licence applies because there are no design files to licence.

Can I build this?

PrintNothing; there are no 3D-printed parts.
BuyNothing. This page documents a one-off demonstration, not a project to replicate, and it does not list parts.
ToolsNot listed in the video, and this is not a project to attempt.
SkillsNot a project to attempt. The creator says nobody without extensive electronics experience should even open a microwave oven.
TimeNot stated in the video.
CostNot totalled in the video. The power supply alone took parts from ten microwave ovens.
SafetyMicrowave oven transformer parts can kill. The creator warns that touching the transformer output while live, or the capacitor before it is discharged, can be fatal, that inhaling dust from a broken ceramic part causes berylliosis, and that if you tried this at home you would probably die. The finished coil draws 350 times the power of the original driver, lights nearby bulbs through the air, can set things on fire and has a nearly deafening spark gap. There are no safety instructions in the video. Do not attempt this.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

styropyro: plasma globe driven by a Tesla coil (2018)

Demo video showing the build and results; not a step-by-step tutorial. Includes safety warnings.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the video to see what was built and the results (This is a demonstration, not a tutorial. The creator warns against replicating it.)
  2. 2.Read the creator's safety warnings(He says nobody without extensive electronics experience should ever open a microwave oven: the transformer output and an undischarged capacitor can kill, and a broken ceramic part releases dust that causes berylliosis. He also says you should not try any of this at home.)

KNOWN ISSUES

  • This is a demonstration video, not a build guide. There are no schematics, no instructions and no safety procedure.
  • Microwave oven transformers output lethal voltages. The creator says you would probably die trying this at home, and that is not hyperbole.
  • Even at half power the voltage was high enough that arcs struck back to the secondary coil; the creator says a few more of those strikes would destroy it. He also destroyed at least one plasma globe during testing.
  • The creator notes that when the rotary spark gap fires it is incredibly loud, nearly deafening.
  • The electromagnetic field is strong enough that other plasma globes and light bulbs nearby light up on their own, and the creator says the setup can set things on fire.

Is there a parts list or schematic?

No. The video shows what was built and how it performed, but no parts list, schematic or design files are published.

Can I build this if I have never built a Tesla coil before?

No, and this page is not meant to help you try. The creator warns that microwave oven transformer parts can kill and says plainly that you should not try this at home. The video is a demonstration, not a guide.

How much power does the final coil draw?

The video says the new driver draws 350 times as much power as the original plasma globe driver, and the creator describes it as a multi-kilowatt Tesla coil. No exact wattage is given.

Why did the MOSFET driver and ZVS driver not work?

After he fried the small power transistor with sloppy wiring, the MOSFET driver also burned out. The ZVS driver with a much bigger flyback transformer produced no glow at all; he suspects the rectifier built into that flyback was preventing arcs in the globe. Overdriven car ignition coils were better but still did not throw arcs out of the glass.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

The stock globe ran at 23 kHz and barely lit a match; with the Tesla coil it ran at 265 kHz, drew 350 times the power and threw two-foot arcs at only half power. Which result surprised you most?

CompareeTEAM26d ago

Practical notes from our verification: this is a 2018 YouTube demo, not a build repository or tutorial. There are no design files, no schematics and no step-by-step instructions. Before opening a microwave oven, the creator warns, you need extensive electronics experience: touching the transformer output while live or the capacitor before it is discharged can kill you, and breaking one ceramic part and inhaling the dust can cause berylliosis. He says that if you tried this at home you would probably die. We list it because the result is spectacular: two-foot arcs out of the glass, wireless fluorescent tubes and popped balloons at only half power. It is a demonstration to watch, not a project to copy.

styropyro (Drake)

Drake, known online as styropyro, posts high-voltage experiments on YouTube and Instagram (@styro.drake). In this November 2018 video he set out to make a cheap plasma globe from eBay far more powerful than stock, and it escalated into a multi-kilowatt Tesla coil.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.