
BUILD YOUR OWN 500 MHZ OSCILLOSCOPE
A 4-channel, 500 MHz oscilloscope that streams raw sample data to your computer over Thunderbolt, PCIe or USB4, turning your RAM into scope memory and your GPU into the display engine.
by EEVengers
- difficulty
- ●●●●●
- time
- multiple weekends
- license
- MIT
- repo
- repo ACTIVE1,343 stars
●●●●● · multiple weekends · MIT · 1,343 stars · repo ACTIVE
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
ThunderScope is the rare open-source instrument that competes with commercial kit on specs: 4 channels, 500 MHz bandwidth, 1 GS/s at 8-bit or 660 MS/s at 12-bit, both 50 Ω and 1 MΩ inputs. Instead of a screen and onboard memory, it streams 100% of the sample data to your computer, so your RAM becomes the buffer and your GPU renders the waveforms, FFTs and protocol decodes in ngscopeclient. Every PC upgrade makes the scope faster. The hardware, FPGA gateware and host software are all MIT-licensed, and the documentation includes full assembly, calibration and box-build guides. This is not a weekend project. You are assembling and calibrating a precision RF front-end with trimcaps, trimpots and BGA components, flashing FPGA bitstreams, and building a custom enclosure from aluminium extrusion. You need either a desktop with PCIe slots or a laptop with Thunderbolt 3/4 or USB4 — and not all USB4 ports work reliably. The PCIe variant needs a specific M.2-to-PCIe adaptor (JoneyTech or IOCrest, with an included interposer board). The one thing most likely to go wrong: buying the wrong adaptor or discovering your USB4 port does not negotiate correctly, leaving you stuck at the host interface before you even see a waveform. For electronics engineers who want to understand every stage from the input jack to the screen pixel, or who need deep sample memory that grows with their PC, this is the build. For everyone else, the Crowd Supply product exists for a reason.
IN THE REPO
GOOD TO KNOW
- —Full KiCad hardware files for the mainboard, front and back endcaps, and two interposer board variants (for JoneyTech and IOCrest M.2 adaptors) in the repository.
- —Complete FPGA gateware (LiteX-based) and host software with installation scripts.
- —Comprehensive documentation site covering assembly, testing, calibration, theory of operation, and two full box builds (PCIe and USB4 variants).
- —MIT licence for hardware, gateware and software — commercial use permitted.
- —Certified open source hardware (OSHW CA000017).
- —This is also sold as a finished product via Crowd Supply — the repository supports both self-builders and buyers who want to modify or repair their units.
Parts to buy
6 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Read the full Introduction and Hardware Revisions pages on the docs site (Understand the PCIe vs USB4 variants, what changed between hardware revisions, and whether your computer has the right interface.)
- 2.Check Purchasing Hardware for PCBA ordering or Crowd Supply product(The docs explain both self-build and buying the finished unit — decide before ordering parts.)
- 3.Follow Mainboard Assembly, Testing and Calibration, then the relevant box build guide(These are multi-page procedures with photos. Calibration is not optional — the trimcaps and trimpots set the analog bandwidth.)
- 4.Install gateware and software using the provided shell scripts(Gateware/install_LiteX.sh and Software/install_ts_software.sh are in the repository. You need a working FPGA toolchain.)
Resources
Documentation, files and community threads for this build — we link straight to the original sources and never rehost the creator’s files.
KNOWN ISSUES
- The M.2-to-PCIe adaptor matters. Only specific models (JoneyTech, IOCrest) are supported, and you must use the provided interposer board. Buying a random M.2 card will not work.
- Not all USB4 ports are equal. Some laptops negotiate poorly or drop to USB 3 speeds. Test your own computer's port before relying on it.
- Calibration is not a checkbox — the docs have a full Testing and Calibration chapter with trimcaps and trimpots for flat frequency response. Skipping it means you built a scope that lies.
- The enclosure is custom aluminium extrusion, not a Hammond box. You are cutting, tapping and engraving it yourself, or ordering the kit from the Crowd Supply campaign.
- ngscopeclient (the host software) is a separate project. It is powerful but not plug-and-play — expect to learn its UI and filter graph. If you want knobs and a screen, this is the wrong scope.
Can I use this without Thunderbolt or PCIe?
The USB4 variant exists, but not all USB4 ports work reliably. Thunderbolt or PCIe is the safer choice. Plain USB 3 will not hit the required bandwidth.
How does this compare to a Rigol or Siglent at the same price?
Commercial scopes have screens, knobs, battery power, and warranty support. ThunderScope has unlimited memory depth (your RAM), GPU-accelerated rendering, and you can modify the hardware and gateware. Different tools for different needs.
Do I have to calibrate it?
Yes. The analog front-end uses trimcaps and trimpots to flatten the frequency response. Without calibration, the 500 MHz bandwidth claim is meaningless.
Can I build just one channel to save cost?
No. The hardware is a fixed 4-channel design, and the FPGA gateware expects all four ADCs. Depopulating channels will not work.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
The repository includes interposer boards for two different M.2 adaptors, calibration procedures with trimcaps and trimpots, and full box-build instructions for both PCIe and USB4 variants. If you built one, which variant did you choose and did your USB4 or Thunderbolt port work first try?
EEVengers
EEVengers is the team behind ThunderScope, an oscilloscope that is open source from volts to bits. Hardware, FPGA gateware and host software are public under the MIT licence, and it is also sold as a finished product.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM10d ago
Practical notes from our verification: the repository was last updated in October 2026, Rev 5.3 is the current hardware version, and the documentation site is comprehensive — assembly, calibration, and theory of operation are all covered in detail. The interposer board designs are specific to JoneyTech and IOCrest M.2 adaptors (named in the folder structure), and the docs explicitly warn that other adaptors will not work. The OSHWA certification (CA000017) is printed on the PCB silkscreen in the Gerber files. There is no official YouTube channel — the README links to Discord, Matrix and IRC for support. The one thing that surprised us: the USB4 variant exists but the docs list known-good and known-bad laptops, which means USB4 compatibility is not guaranteed. If you are buying parts before testing your host, buy the PCIe variant and the correct adaptor, or risk a dead end.