TURN A BROKEN TV AND AN OLD OFFICE PROJECTOR INTO AN OLED-LIKE SCREEN
An old office projector becomes a per-pixel backlight for a stripped LCD panel, giving recycled kit about 786,000 dimming zones.
by Matt (DIY Perks)
- difficulty
- ●●●●○
- time
- a weekend-plus
- license
- license not specified
- repo
- repo ACTIVE
●●●●○ · a weekend-plus · license not specified · repo ACTIVE
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
Matt from DIY Perks stripped a TV destined for the tip down to its LCD panel and diffusion sheet, then mounted it in an open-back frame so an old office DLP projector could shine onto it from behind. OBS software with a Luma Key and Glow filter turns the live picture into a softened brightness map, giving about 786,000 dimming zones, where many local dimming TVs have fewer than 68 by 38. The result genuinely looks like an OLED, with blacks that stay black and almost no blooming, but it is dimmer and less colour accurate than a real OLED, and a long-throw projector needs roughly 2 metres behind the TV or a pair of mirrors to fold the light path. This is an open forum thread, not a finished guide: you build your own frame and line the projector up by eye. If you have the TV, the projector, the space and the patience to iterate, this is a genuinely novel way to rescue e-waste.
IN THE REPO
GOOD TO KNOW
- —This is a development thread on the DIY Perks forum, not a finished build guide.
- —OBS filter settings are posted, with screenshots of each parameter value.
- —No BOM, no CAD files, no frame construction detail — the video shows Matt's custom metalwork but you will improvise yours.
- —Requires a TV with a broken or removable backlight, an old DLP projector (1024×768 or better), and OBS software.
- —No licence stated; it is a community development thread, not a licensed repository.
- —The forum is active and people are posting alternate setups, but this is not a step-by-step instruction set.
Parts to buy
3 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
This build involves mains voltage — for adults comfortable with electrical work only.
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
DIY "infinity contrast" TV - with 100% recycled parts
The original build video, 1 Mar 2025, 3.8M views. Shows the full assembly and comparison footage but does not walk through the OBS settings — those are in the forum thread.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Read the forum thread and look at the OBS filter screenshots (The settings are posted with zoom-in images; you will copy those into OBS.)
- 2.Watch the DIY Perks video (Shows the assembly and result, but not the OBS configuration detail.)
- 3.Source a broken or spare LCD TV and an old DLP projector
- 4.Download OBS Studio and the Glow filter plugin (Free software, required for the real-time luminance map.)
Resources
Documentation, files and community threads for this build — we link straight to the original sources and never rehost the creator’s files.
KNOWN ISSUES
- Long-throw projectors need about 2 metres behind the TV — that is room-dominating. A short-throw model is recommended but harder to find second-hand and not costed into the 'free recycled parts' headline.
- The forum thread gives OBS settings but no frame construction detail. You are improvising the metalwork or woodwork to hold the LCD panel and diffusion sheet.
- Disassembling a TV exposes the power supply's large capacitors, which can hold a nasty charge even after unplugging. Don't touch them.
- Alignment between the projector and the LCD panel is manual and iterative — if the projector image does not sit exactly behind the TV image, you get visible blur or ghosting.
- Without the colour wheel the projector only shows black and white, which is all a backlight needs. The colour still comes from the TV's own LCD panel.
Can I use any TV?
It needs an LCD TV whose backlight you can remove. His was a TV with a broken backlight that was headed for the tip. OLED and plasma TVs have no backlight, so the trick doesn't apply to them.
How do I play the same content on both the TV and projector?
OBS captures the TV display output, applies the filters, and full-screens the result onto the projector. It is not two separate media players.
Will this work at 4K or with VRR?
The video doesn't test 4K or VRR. The PC running OBS processes every frame live, so it has to keep up with your TV's resolution and frame rate.
How bright is it compared to a real OLED?
Dimmer and less colour accurate, but the contrast is genuinely OLED-like because the projector only lights the bright parts of the image.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
About 786,000 dimming zones from a 1024×768 projector — and people are already posting alternate setups in the forum thread. What would you use as the frame, and would you go short-throw or fold the light path with mirrors?
Matt (DIY Perks)
This build started as a way to rescue a TV with a broken backlight and turned into a development thread after the video went live.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM1mo ago
Practical notes from our verification: the forum thread was opened by DIY Perks when the video went live and is still active, with people posting their own ideas such as folding the light path with mirrors. The OBS settings are in four screenshots in the opening post (zoom in for the values), but there is no frame construction detail, so you build your own stand. The single biggest decision is the projector: long-throw models are cheap second-hand but need about 2 metres behind the TV, while short-throw models fit far better. If you already have a broken TV and an old office projector, this is a genuinely clever way to rescue both.