TURN SANDBLASTING GRIT INTO A GIANT RUBY WITH AN ARC WELDER
NightHawkInLight melted sandblasting-grade aluminum oxide and a gram of green chromium oxide with a carbon electrode in his arc welder, ending up with a polycrystalline synthetic ruby the size of his graphite crucible.
by NightHawkInLight
- difficulty
- ●●●●○
- time
- an afternoon
- license
- license not specified
- repo
- repo
●●●●○ · an afternoon · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is a materials demonstration, not a step-by-step build. NightHawkInLight melted white aluminum oxide (sandblasting grit) mixed with 1% green chromium oxide using a carbon electrode in an arc welder, inside a graphite crucible he drilled on a drill press. The recipe is clear (99 g aluminum oxide, 1 g chromium oxide), but the video gives no arc current, melt time or crucible dimensions. His first try only made tiny grains, the second poured out an ingot with a rough underside, and flipping it and remelting the rough side gave a smooth ruby the size of the crucible. The green, non-fluorescent powder turns pink and glows brilliantly under UV. The result is polycrystalline synthetic ruby, not a gem-quality stone, so it is not comparable to fine natural rubies, which sell for about 2,000 to 10,000+ dollars per carat. If you already own an arc welder and want to see this in your own workshop, it is a fun experiment; work with good ventilation and eye protection. The process was developed by the YouTube channel Element Maker, which the video credits and links to.
IN THE REPO
GOOD TO KNOW
- —No repository. This is a YouTube demonstration, not a published build guide.
- —The process was developed by the YouTube channel Element Maker; NightHawkInLight adapted it.
- —The video shows the technique and materials but does not include a written parts list, graphite crucible dimensions, or arc welder settings.
- —No design files or licence are published; it is a demonstration video.
- —The result is polycrystalline synthetic ruby, not a gem-quality stone.
- —Aluminum oxide is sold as sandblasting media; the carbon electrodes cost about 20 USD for a 50-pack on eBay.
Parts to buy
4 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
NightHawkInLight: synthetic ruby with an arc welder
NightHawkInLight's video, published 2 March 2020. Shows the process from mixing the powder to the remelted final ruby, including the UV fluorescence check.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the NightHawkInLight video to see the technique and the result (The primary source for this build. It credits the channel Element Maker for developing the process.)
- 2.Get white aluminum oxide (sandblasting media) and green chromium oxide powder(Mix 99 g of aluminum oxide with 1 g of chromium oxide. The chromium is what makes ruby red.)
- 3.Drill a cavity into a piece of graphite rod to make a crucible(He drilled his on a drill press. Graphite blocks, rods and crucibles are sold online.)
- 4.Melt the mix in the crucible with a carbon electrode, then flip the ruby and remelt the rough side(The video gives no arc current or time. Keep the arc from getting too close, or carbon from the electrode ends up in the ruby. Work with good ventilation and eye protection.)
KNOWN ISSUES
- Use green chromium oxide, as in the video. He notes it is rather non-toxic for a chromium compound, but still says not to do this without really good ventilation.
- Getting the carbon arc too close to the melt transfers carbon from the eroding electrode into the ruby. On his second try he heated the crucible from the outside first, but still had to put the arc on top to fully melt the powder.
- Striking the arc straight into loose powder blows a lot of dust into the air and scatters tiny ruby grains across the workbench; his first attempt only produced grains.
- Polishing on a belt sander does not work: ruby is about as hard as the abrasive on the belt, so the belt wore away as fast as the ruby. Remelting the rough side with the arc is what made it smooth.
- The result is polycrystalline synthetic ruby, not a gem-quality stone. Do not expect the value of a natural ruby.
- The video gives no arc current, melt time or crucible dimensions, so expect to experiment.
Can I use a different welder?
The video uses an arc welder fitted with a carbon electrode (a 50-pack cost about 20 USD on eBay). Earlier he also used carbon rods salvaged from old 6 V lantern batteries. The video gives no welder settings and does not test other welder types.
Is this a real ruby?
It is synthetic ruby: aluminum oxide colored red by chromium, and it glows brilliantly under UV light, which the video treats as a sure sign of ruby. It is polycrystalline, not a gem-quality stone.
How much does chromium oxide cost?
The video gives no price. The recipe uses only 1 g of chromium oxide per 99 g of aluminum oxide, so one bag lasts a very long time.
What if I do not have a graphite crucible?
He used a piece of graphite round stock from a friend and drilled a cavity into it on a drill press. He notes that graphite blocks, rods and crucibles are sold online. His very first test melted the powder on a flat graphite plate, which only gave tiny grains.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
The video ends with a polycrystalline synthetic ruby the size of a graphite crucible, made in about an afternoon with an arc welder, but it gives no arc current, melt time or crucible dimensions. What would you change to make this safer or more repeatable?
NightHawkInLight
NightHawkInLight is a YouTube maker channel. In this video he tests Element Maker's method of making synthetic rubies with an arc welder and modifies it slightly to improve quality, with Element Maker's permission.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM26d ago
Practical notes from our verification: there is no repository, no written guide and no parts list; this is a YouTube demonstration from 2 March 2020. The process was developed by the YouTube channel Element Maker, which the video credits and links to in its description. The recipe is simple (99 g aluminum oxide, 1 g green chromium oxide, carbon electrode, graphite crucible), but there are no arc settings or melt times, so expect a few tries: his first attempt only made tiny grains. The result glows brilliantly under UV but is polycrystalline synthetic ruby, not a gem-quality stone. Work with good ventilation and eye protection.