BUILD A FIBER LASER THAT CUTS STEEL IN YOUR GARAGE
A 1000 watt fiber laser that cuts 8 mm steel, built in a garage for about 10,500 dollars.
by Travis Mitchell
- difficulty
- ●●●●●
- time
- months
- license
- license not specified
- repo
- repo
●●●●● · months · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is Travis Mitchell's second garage-built fiber laser cutter, documented in a YouTube series but without published plans, CAD files, or a parts list. He spent about 10,500 dollars with sponsored servos and aluminum parts — expect more if you buy everything. On first power-up it cut 8 mm carbon steel, which is near the top of what a 1000 watt source can do, and it cut thin aluminum with nitrogen assist. The gantry moves at 60 meters per minute, comparable to some commercial machines. The catch: there is nothing to download. You are reverse-engineering from video footage. You need machining skills to build a gantry, electrical knowledge for 240V circuits, and laser safety training because Class 4 lasers cause instant permanent eye damage. The biggest risk is not the build — it is underestimating the safety enclosure and protection requirements. If you have never worked with industrial lasers, this is not the project to learn on.
IN THE REPO
GOOD TO KNOW
- —This is a documentation project only — there are no CAD files, BOM, or build instructions in any repository.
- —The primary source is a YouTube video series by Travis Mitchell showing his second machine build.
- —The servos were sponsored by Leadshine and aluminum parts by PCBWay, so actual cost with bought parts would be higher.
- —The machine is smaller than commercial 5×10 foot cutters — this one takes 2×3 foot sheets.
- —No licence information is available because there is no repository.
- —This is a Class 4 laser system — it requires a fully enclosed box, certified eye protection, and 240V circuits.
Parts to buy
7 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
This build involves mains voltage — for adults comfortable with electrical work only.
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
V2 Part 12: It's Done!
Final assembly and first cuts of the second machine — 8 mm carbon steel cut on first try
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the full YouTube series (Part 12 is the final episode — work backward to see the full build sequence)
- 2.Understand Class 4 laser safety requirements(This is not optional — get training or do not build this)
- 3.Source a 1000W fiber laser module(Servos were sponsored by Leadshine, aluminum parts by PCBWay — expect higher cost buying retail)
KNOWN ISSUES
- There are no build files — you are reverse-engineering from video. If you need a step-by-step guide, this is not it.
- The $10,500 figure included sponsored servos and aluminum parts. Actual cost will be higher.
- Class 4 lasers cause instant permanent blindness. Certified protection and a fully enclosed, interlocked system are mandatory, not suggestions.
- You need 240V circuits and proper electrical safety — this is not a plug-and-play tool.
- Cutting 8 mm steel is near the limit of a 1000W source. Thicker material or stainless will require more power or slower speeds.
Are there build plans or CAD files available?
No. This is documented only through YouTube videos. You would need to reverse-engineer the gantry, enclosure, and wiring from footage.
Can I build this for $10,500?
Unlikely. That figure included sponsored servos and aluminum parts. Buying everything retail will cost more.
Is this safe for a home workshop?
Only if you have laser safety training and can build a fully enclosed, interlocked system. Class 4 lasers are industrial equipment — the risk is instant permanent eye damage.
What is the thickest steel it can cut?
8 mm carbon steel was cut on the first try, which is near the top end for a 1000W fiber source. Thicker or harder materials would require more power.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
8 mm carbon steel cut on the first try, with a bed that takes 2×3 foot sheets and rapids at 60 m/min — what would you cut first if you had one of these running?
Travis Mitchell
Travis built his first fiber laser for $15,000, then refined the design into this second machine for about $10,500 with sponsored parts.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM10d ago
Practical notes from our verification: this is not a downloadable project — it is a video-documented build with no published CAD, BOM, or instructions. The YouTube series shows the second iteration of Travis's machine, and the cost figure of $10,500 included sponsored servos from Leadshine and aluminum parts from PCBWay, so buying everything retail will push the budget higher. The single biggest thing to know before you start: Class 4 fiber lasers are not hobbyist tools — they cause instant permanent eye damage and require certified safety glasses, a fully enclosed and interlocked enclosure, and proper laser safety training. If you have never worked with industrial lasers, this is not the project to learn on.