BUILD A HOVERBIKE IN YOUR SHED THAT ACTUALLY FLIES
A former plumber built a hoverbike in his shed that actually lifted him off the ground — no steering, no brakes, just two paramotor engines and a frame.
by Colin Furze
- difficulty
- ●●●●●
- time
- a few weeks (Colin's own words)
- license
- license not specified
- repo
- repo
●●●●● · a few weeks (Colin's own words) · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is not a project you can build from plans, because there are no plans. Colin Furze, a former plumber, built a hoverbike in his shed in 2016 from two paramotor engines, one front and one rear, which he says kick out about 70 odd kilos of thrust each. It has no steering, no brakes and not even a seat, and it only just lifts him off the ground, so there was no spare lift left for stability controls. Many designs, shapes and frames were tried before it got off the ground, and he crashed and broke parts while learning to ride it. Three short build videos show the thrust test and the S-shaped chassis, but they are a story of the build, not a guide. It is proof that a person can leave the ground on something homemade, not a recipe for doing it yourself, and it is extremely dangerous. For comparison, A.L.I. Technologies' XTURISMO Limited Edition hoverbike launched at 77.7 million yen, which the company stated as US777,000 dollars.
IN THE REPO
GOOD TO KNOW
- —This is a completed stunt build from 2016, not an open-source project with files to download.
- —There are no CAD files, no parts list, no build instructions and no repository.
- —The final video shows the hoverbike flying and crashing; three short build videos show the thrust test and the chassis, but not a step-by-step guide.
- —Many designs, shapes and frames were tried, with bits hacked off and added on, before it got off the ground.
- —The build was sponsored by Ford's Unlearn campaign.
- —This is extremely dangerous and not something to copy.
Parts to buy
5 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Homemade Hoverbike
Highlight video from 2016 showing the hoverbike flying and crashing. Not a build tutorial.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
KNOWN ISSUES
- There are no plans, no CAD files, no parts list and no instructions. This is a one-off stunt build, not an open-source project.
- The build videos show the idea, the S-shaped chassis and a water-weight thrust test, but there are no measurements or plans to follow.
- Colin says he had no engineering qualifications and no experience of flying; it was his first attempt at anything that leaves the ground. This is not a beginner project, or a project to copy at all.
- The hoverbike has no steering, no brakes and no stability controls, and Colin crashed and broke parts while learning to ride it.
- Two paramotor propellers spin right next to the rider; Colin mounted the rear paramotor frame above the engine so he would not fall back into the propeller.
- Paramotor engines are serious machines: the parting advice when Colin picked them up was not to start them indoors, and during the thrust test he stood on the rig just in case.
Can I actually build this?
Not from plans. There are no plans, no parts list and no step-by-step instructions. The final video and three short build videos show the main ideas (two paramotor engines, an S-shaped chassis, a thrust test), but not enough to copy it, and it is extremely dangerous.
How much thrust do the engines make?
Colin says paramotors kick out about 70 odd kilos of thrust each, and he weighs 80 kg. In his own lift test one engine raised about 53 kg, and the finished hoverbike only just lifted him off the ground.
Why is there no steering?
Colin had ideas for adding stability controls, but there was no spare lift left: it only just lifts him off the ground, so he could not add any extra weight.
Is it safe to ride?
No. It has no steering, no brakes and not even a seat, and Colin crashed and broke parts while learning to ride it. It is extremely dangerous and not something to copy.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
The whole thing uses two paramotor engines pushing about 70 kg of thrust each, and Colin weighs about 80 kg — so the margin was tight. If you were building a hoverbike from scratch, what would you change first: more thrust, less weight, or actual steering?
Colin Furze
Colin Furze is a former plumber who builds his projects in his shed. Ford's Unlearn campaign asked him to create something he had never built before, viewers asked him to fly, and the 2016 hoverbike became his first ever attempt at making anything that leaves the ground.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM28d ago
Practical notes from our verification: this is a 2016 stunt build with no repository, no CAD files and no instructions. The final video shows the hoverbike flying and crashing, and three short build videos show the thrust test with water containers and the S-shaped chassis, but nothing you could follow as a guide. Colin says he had no engineering qualifications and no flying experience, and he crashed and broke parts while learning to ride it. The single biggest thing to know is that this is extremely dangerous and not something to copy.