BUILD YOUR OWN LAPTOP FROM SCRATCH
A high school student designed a 4K AMOLED laptop with a detachable mechanical keyboard, CNC aluminium body, and open-sourced the entire design under MIT.
by Byran Huang
Built with3D printing
- difficulty
- ●●●●●
- time
- several months
- license
- MIT
- repo
- repo ACTIVE4,309 stars
●●●●● · several months · MIT · 4,309 stars · repo ACTIVE
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is not a weekend project. Byran Huang spent six months designing a custom laptop mainboard in KiCad — six layers, around 1,600 connections, three revisions — and then CNC machining and anodizing an aluminium chassis. The result is a working Linux laptop with a 4K AMOLED screen, a detachable wireless mechanical keyboard with 3D-printed keycaps, and a 62.9 Wh battery good for about seven hours. It runs 7B AI models locally and plays Minecraft at 4K low settings around 30 fps. The design is open source under MIT, so you can build one or modify it commercially. But the repository is a design archive, not a tutorial. There is no BOM with suppliers and no assembly guide, though the chassis STEP file is included. You will need to source a Rockchip RK3588 compute module, a compatible 4K AMOLED panel, a trackpad module, a Framework hinge, four slim lithium cells, and then either find a PCB assembly service or solder 1,600 connections yourself. The single biggest trap is the battery: the custom lithium pack relies on Byran's own charging and balancing design, and a mistake there is a fire risk. If you have never designed a PCB, machined metal, or assembled a laptop before, this project will teach you — but it will cost you several months and easily over a thousand dollars in parts, tools, and failed prototypes. The performance does not match a MacBook (the RK3588 is far slower than an M3 Max), but that was never the point. This is for someone who wants to understand every layer of their machine, and who has the patience to iterate.
IN THE REPO
GOOD TO KNOW
- —KiCad schematic and six-layer PCB design files are in the repository under MIT licence, commercial use allowed.
- —No bill of materials: the README lists the CM3588 module, 4K AMOLED panel, trackpad module, Framework hinge, and battery cells, but there is no complete BOM with part numbers or suppliers.
- —Firmware and Linux configuration are included, but setup instructions are minimal.
- —No step-by-step build guide: the repository documents the design process but assumes you know how to order PCBs, source components, machine aluminium, and assemble lithium cells with a BMS.
- —The chassis CAD is in the repository (chassis/chassis.step.zip), along with KiCad projects for the mainboard, keyboard, power and other boards.
- —The project took three PCB revisions and six months to complete — expect iteration.
Parts to buy
11 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
- Rockchip RK3588 CM3588 compute moduleFind
- 4K AMOLED panelFind
- Trackpad moduleFind
- Framework laptop hingeFind
- Four 4Find
- 250 mAh lithium cells (5.7 mm tall)Find
- BMS for 4S lithium packFind
- Mechanical keyboard switches and componentsFind
- PCB fabrication and assembly serviceFind
- Aluminium stock for CNC chassisFind
- Anodizing serviceFind
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
How I Made A Laptop From Scratch - anyon_e
22-minute build documentary covering PCB design, battery assembly, keyboard build, and chassis machining
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the full build video to understand the scope (This shows the entire process, including the three PCB revisions and all the parts that had to be bought)
- 2.Clone the repository and review the KiCad PCB files(The schematic is the real documentation — there is no written assembly guide)
- 3.Source the CM3588 module and verify it matches the pinout in the schematic(This is the single most expensive and hardest-to-find part)
- 4.Find a PCB fabrication service that can handle six-layer boards and 1,600 connections(Expect to pay for assembly unless you want to hand-solder fine-pitch components)
- 5.Send the chassis STEP file from the repository to a CNC machining service, or adapt it to your parts(The chassis is CNC milled and anodized aluminium; the STEP file is in chassis/chassis.step.zip)
Resources
Documentation, files and community threads for this build — we link straight to the original sources and never rehost the creator’s files.
KNOWN ISSUES
- The repository has no complete BOM with suppliers. You rebuild the parts list from the KiCad files, the per-folder READMEs and the video.
- The CM3588 module is not a common part. Verify availability and pinout compatibility before ordering PCBs.
- A four-cell lithium pack needs working balance charging and protection. Byran designed his own on the power board, so verify your build of it before charging the cells.
- Three PCB revisions were required to get this working. If this is your first six-layer board, expect at least one failed revision.
- CNC machining and anodizing aluminium is expensive and requires either owning a mill or paying a service. The 17.5 mm chassis is not a simple print.
- The RK3588 is far slower than a MacBook M3 Max — if you are expecting similar performance, this is not the build. It runs light tasks and 7B models, not heavy workloads.
Can I buy this as a kit?
No. This is a design archive, not a product. You source every part, fabricate the PCB, machine the chassis, and assemble it yourself.
How much does it cost to build?
Byran doesn't publish a total cost or a full BOM. The biggest costs are the CM3588 compute module, the 4K AMOLED panel, six layer PCB fabrication and assembly, and CNC machining of the aluminium body.
Is it faster than a MacBook?
No. The RK3588 is nowhere near an M3 Max in performance. It runs Linux, plays Minecraft at 4K low settings around 30 fps, and handles 7B AI models locally. The point is learning, not beating Apple.
Do I need to know how to design PCBs?
Not necessarily — the KiCad files are done — but you do need to understand them well enough to verify parts, order fabrication, and debug if something does not work. If this is your first six-layer board, expect a steep learning curve.
What is the single biggest risk?
Lithium battery assembly. The 4S pack uses Byran's own charging and balancing design, so a mistake in building or testing that power board can cause a fire. Test it carefully before charging the cells.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
Byran went through three PCB revisions and six months to get this working — and he still had to buy the processor module, screen, trackpad, and hinge. If you were building one, what would you change first?
Byran Huang
Byran Huang is a high school student who spent six months designing and building a custom laptop from scratch, including three PCB revisions, a CNC aluminium chassis, and a detachable mechanical keyboard. He documented the entire process on YouTube and open-sourced the design under MIT.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM12d ago
Practical notes from our verification: the repository is a design archive, not a build tutorial — the schematic is the documentation, and you are expected to source parts, order PCBs, and machine the chassis yourself. The video shows the full process including all three PCB revisions, but there is no complete BOM; the chassis STEP file is in the repository. The single biggest risk is battery safety: Byran designed his own charging and balancing for the four-cell lithium pack, and that is the part most likely to cause a fire if a rebuild gets it wrong. If you have never built a PCB or assembled a lithium battery before, this is not the project to learn on.